GM - General Motors

	GM TEST METHODS Engineering Materials and Processes Test Method - Materials Buy GM Collections Online subscriptions to multiple documents on various subjects Info To speak with an IHS Subject Matter Expert call 1-888-752-0334, outside the US/Canada call 303-397-2892. More Top GM Standards...

GM TEST METHODS - Engineering Materials and Processes Test Method - Materials

Scope:
This hardcopy GM Volume contains documents covering procedures related to flammability, paint finishes, and test methods.

Standards Included in the GM Test Methods Volume:

• GM503S - Procedures for Creating, Revising and Approving Compounds to GMP Specifications
• GM505S - Authoring GM Standards
• GM508S - Procedures for Creating, Revising and Approving Adhesive Specifications
• GM3661P - Determination of Hydrogen Embrittlement by Static Loading
• GM4249P - Stress Relieving Gray Iron Castings
• GM4260P - Measuring Thickness of Electrodeposits and Anodic Coatings
• GM4283P - Recommended Practices for Shot Peening Processes
• GM4298P - Salt Spray Test
• GM4357P - Spot Test for Etch Susceptibility of Stainless Steel
• GM4358P - Test for Roping Characteristics of Rolled Steel Sheet or StriP -
• GM4359P - Cycle - Immersion Corrosion Test for Stainless Steel Molding Materials
• GM4380P - Viscosity of Crankcase Oil At-17.8 C
• GM4416P - Recommended Practices For Spot Welding of Mild Steel
• GM4452P - Measuring Tensile Strength of Electrodeposits
• GM4453P - Method for Measuring Stress in Electrodeposited Nickel
• GM4460P - Weldments - Test Methods
• GM4465P - Water Fog Humidity Test
• GM4466P - Water Immersion Test
• GM4471P - Cup Ductility Test for Sheet and Strip Metal
• GM4473P - Rivet Ductility Test
• GM4476P - CASS Test Copper - Accelerated Acetic Acid Salt Spray Test (Fog)
• GM4478P - Qualification and Quality Control Test for Radial Lip Type Seals for Rotating Shafts
• GM4479P - Mechanical Stability of Grease Shell Roller Test
• GM4480P - Test for Blushing Resistance of Anodized Aluminum (Modified Kape Test)
• GM4482P - Bend Test for Heat Treated Parts Made from Flat Rolled or Wire Steel Products
• GM4486P - Test for Ozone Resistance of Elastomer Compounds
• GM4489P - Evaluating Paint Appearance and Adhesion
• GM6090M - Flammability of Materials
• GM6189P - Test Procedure for the Locking Ability Performance of Nonmetallic Locking Element Type Prevailing Torque Lock Screws
• GM8100G - Sheet Metal Rating Scale
• GM8101G - Undervehicle and Underhood Component Rating Scale
• GM8102G - Fastener Rating Scale
• GM8103G - White Corrosion Rating Scale
• GM9001P - Method for Gaging Seal Lip Diameter
• GM9002P - Method for Gaging Seal Lip Opening Pressure
• GM9003P - Corrosion Test for Seal Compounds
• GM9004P - Method for Determining Hardness of Seal Materials
• GM9005P - Standard Practice for Specifying Radial Lip Type Seals
• GM9006P - Method for Determining Lip to Case Eccentricity
• GM9007P - Method for Checking Radial Lip Seal Garter Springs
• GM9008P - Decal Application Instructions
• GM9009P - Test for Volatiles in Silicone Rubber
• GM9010P - Test for Solid Content of Adhesives and Sealers
• GM9011P - Test for Cold Shock Resistance of Sealers, Deadeners and Vinyl Films
• GM9012P - Test for Water and Shock Resistance of Plastisol Sealers
• GM9013P - Test for Viscosity of Adhesives and Sealers
• GM9014P - Test for Weld Through Sealers
• GM9015P - Test for Weldability of Weld Through Sealers
• GM9016P - Test for Compatibility of Adhesives with Vinyl
• GM9017P - Test for Bond Strength of Solvent Type Adhesives
• GM9019P - Test for Tack Range of Adhesives
• GM9020P - Test for Metal to Metal Sealers - Adhesives
• GM9022P - Test for Settling Characteristic of Adhesives
• GM9027P - Test for Staining Characteristics of Adhesives and Sealers
• GM9028P - Adhesion-Creep Characteristics of Adhesives on Sponge Rubber
• GM9030P - Oil Separation from Grease
• GM9031P - Test for Mastic Type Windshield Sealers
• GM9032P - Test for Determining Impact Strength of Plastics
• GM9033P - Colorfastness to Crocking (Rubbing)
• GM9035P - Quality Control of Lubricants (Infrared Spectrophotometric)
• GM9037P - Test for Measuring Expansion of Sealers
• GM9038P - Test for Evaluating Heat Expandable Type Sealers
• GM9039P - Test for Effect of Copper on Propylene Plastic
• GM9040P - EC Test Electrolytic Corrosion Test for Evaluating the Corrosion Protection Characteristics of Copper - Nickel - Chromium Electrodeposits
• GM9041P - Method for Corrosion Measurement by Microscopic Techniques
• GM9042P - Test for General Motors Vapor Pressure (GMvp)
• GM9043P - Evaporation Characteristics of Lubricants
• GM9044P - Volatility Characteristics of Lubricants (Pan Evaporation)
• GM9045P - Oxidation Stability of Gasoline in Presence of Copper (Induction Period Method)
• GM9046P - Total Saponifiable Matter
• GM9047P - Melting Point of Grease (Glass Tube Method)
• GM9048P - High Temperature Performance of Grease
• GM9049P - Procedure for Qualifying Primers and Primer-Surfacers
• GM9050P - Source Performance Evaluation and Reporting Procedure - Fasteners
• GM9051P - Method for Characterizing Solder Metal
• GM9052P - Method for Determining Adhesion of Zinc Coatings on Sheet Steel (Simulated Draw Bead Test)
• GM9053P - Hardness Test and Hardness Number Conversions
• GM9054P - Microhardness Testing
• GM9055P - Method for Measuring Peroxide Number Organic Peroxides in Hydrocarbons
• GM9056P - Process Requirements for Preparing Chrome Plated Parts for Painting
• GM9059P - Test for Thermal-Oxidative Stability Characteristics of Plastics
• GM9060P - Procedure for Qualifying Quick-Connector Fittings for Nylon Fuel Line Usage
• GM9061P - Permeability Test for Fuel Hose and Tubing
• GM9064P - Torque Tension Test
• GM9066P - Electrochemical Test for Evaluating Ethylene Glycol Engine Coolants for Corrosion Inhibition at Aluminum Heat-Rejecting Surfaces
• GM9067P - Test for Gasoline Extractables in Hose
• GM9068P - Test for Fogging Characteristic of Plastics
• GM9069P - Test for Resistance to Hydrogen Sulfide Staining
• GM9070P - Procedure for Testing Flammability of Materials
• GM9071P - Tape Adhesion Test for Paint Finishes
• GM9072P - Methods for Determining Plastic Deformation of Sheet Steel
• GM9073P - Sheet Metal Surface Texture Measurements
• GM9074P - Hardness Testing - Correction for Rounds
• GM9075P - High Temperature Flow Properties of Grease
• GM9076P - Water Spray Resistance of Grease
• GM9077P - Glass Content of Glass Reinforced Plastics
• GM9078P - Low-Temperature Torque of Grease
• GM9079P - Test for Evaluating Zinc Phosphate Coating
• GM9080P - Procedure for Qualifying Nylon Hose Coupling
• GM9081P - Determination of Lead in Non-Leaded Gasoline
• GM9082P - Test for Wear Resistance of Plastics
• GM9083P - Quality Control of Nodular Iron Castings Steering Knuckle and Disc Brake Caliper Housing
• GM9084P - Test for Prevailing Torque Nuts
• GM9085P - Test for Heat Curing Sealer
• GM9089P - Standard Practice for Designating Plastic Materials and Marking Plastic Parts
• GM9091P - Method for Testing Thread and Gasket Sealers
• GM9092P - Test for Prevailing Torque Nuts (Hand Qualification Test)
• GM9093P - Color Identification of Metric Parts
• GM9094P - Method for Determining Melting Point of Semicrystalline Polymers by Differential Scanning Calorimetry
• GM9095P - Determination of Percent Nodularity of Nodular Iron
• GM9096P - Fretting Wear Properties of Lubricating Grease
• GM9097P - Determination of Manganese in Gasoline
• GM9098P - Compatibility of Lubricating Grease with Elastomers by Immersion
• GM9099P - Engine Oil Filterability Test (EOFT)
• GM9101P - Test for Evaluating Paint Film Distinctness of Image
• GM9102P - Corrosion Creepback Test Method
• GM9121P - Determining the Recoverable Energy of Flexible SMC Materials
• GM9125P - Procedures for Laboratory Accelerated Exposure of Automotive Materials
• GM9126P - Test for Cleanability of Textiles and Plastics
• GM9127P - Resistance to Tuft Removal or Loop Pullout of Floor Coverings
• GM9128P - Mildew Growth
• GM9129P - Seam Strength Of Automotive Materials
• GM9130P - Test for Resistance to Odor of Textiles
• GM9131P - Color Changes Due to Temperature or Humidity
• GM9132P - Resistance to Raveling of Woven Textiles
• GM9133P - Resistance to Water Spotting, Finish Disturbance, Salt Staining and Discoloration
• GM9134P - Mink Pull-Out
• GM9135P - Wear or Abrasion of Textiles on Seat Squirm Machine
• GM9136P - Pliability of Seat Belt Webbing
• GM9137P - Color Transfer of Sewing Thread
• GM9138P - Dimensional Stability of Sheepskin
• GM9139P - Lint Pickup And Lint Retention of Textiles
• GM9140P - Resistance to Cold Cracking of Leather and Plastic Rolled Goods
• GM9141P - Compatibility of Plastic Rolled Goods and Leather to White Vinyl and to White Leather
• GM9142P - Grain Retention of Interior Trim Materials
• GM9143P - Crazing of Vinyl Trim Materials
• GM9144P - Resistance to Arcing or Charring of Dielectrically Embossed Materials
• GM9145P - Test for the Bond Strength of Dielectrically Embossed Trim Material
• GM9146P - Wicking and Blistering of Convertible Top and Roof Trim Materials
• GM9147P - Cleanability of Convertible Top and Roof Trim Materials
• GM9148P - Dimensional Stability of Convertible Top and Roof Trim Materials
• GM9149P - Stitch Tear Resistance of Vinyl Coated Genuine Leather
• GM9150P - Resistance to Marring or Scuffing
• GM9151P - Pliability of Plastic Material
• GM9152P - Overlay Properties of Vinyl Coated Fabrics For Sidewall Applications
• GM9153P - Procedure to Determine the Relative Power Factor of Fabric used on Vinyl Coated Twill and Knit Constructions
• GM9154P - Resistance To Arcing and Charring Of Adhesives, Resins and Marking Inks
• GM9155P - Method for Determining the Sealing Properties of Vinyl Convertible Top Material
• GM9156P - Method for Determining the Soil Pick-Up and Cleanability of Vinyl Materials
• GM9157P - Bond Strength of Metallized Mylar Strings, Belts and Moldings
• GM9158P - Procedure for Determining the Extrusion of Dielectrically Bonded Metallized Mylar
• GM9159P - Dielectric Embossing of Vinyl
• GM9160P - Topcoat Adhesion of Vinyls
• GM9161P - Procedure for Determining the Bond Strength of Dielectrically Embossed Sidewall Padding
• GM9162P - Test for Shrinkage, Grain Loss, Gloss and Color Change of Vacuum Forming Material
• GM9163P - Outdoor Weathering of Automotive Exterior Materials
• GM9165P - Test for the Embossing Properties of Dielectrically Bonded Flat Vinyl Coated Metallized Mylar
• GM9168P - Test Procedure to Determine the Tear Characteristics of Vacuum Forming Material
• GM9169P - Procedure for Determining the Bond Strength of Dielectrically Embossed Aluminum Appliques
• GM9170P - Procedure for Determining Rusting of Body Panels Promoted by Trunk Lining Materials
• GM9171P - Procedure to Determine the Female Mold Forming Temperature of Vacuum Material
• GM9172P - Sunlamp Exposure Test
• GM9173P - Formability of Unsupported Expanded Vinyl
• GM9175P - Power Factor of Dielectric Foundation Board
• GM9176P - Procedure for Determining the Relative Power Factor of Dielectric Sealing Tape
• GM9177P - Surface Irregularities of Unsupported Expanded Vinyl (Pyramid Method)
• GM9178P - Dielectric Sealing Properties of Roof Trim and Convertible Top Materials
• GM9180P - Dielectric Embossing of Padding
• GM9181P - Formability of Unsupported Expanded Vinyl Head Restraint Material
• GM9182P - Dielectric Compression Bond of Polyurethane Foam
• GM9183P - Procedure for Determining the Ability of Dielectrically Bonded Polyurethane Foam to Resist Arcing
• GM9184P - Dielectric Embossing of Body Cloth
• GM9185P - Resistance to Wicking of Exterior Roof Cover Seams
• GM9186P - Stress-Strain Limits of Non-Woven Material
• GM9187P - Test for the Hot Bond Strength of Extruded Molding
• GM9188P - Craze Resistance of Interior Vinyl Extruded Moldings
• GM9189P - Dielectric Embossing Of Carpet
• GM9190P - Procedure for Determining the Performance Bonding of Bilaminate Heat Seal Film
• GM9191P - Shrinkage, Grain Loss, Gloss and Color Change Vacuum Forming Material
• GM9192P - Extensibility of Cavity Vacuum Forming of Laminate Fabrics
• GM9193P - Procedure Determining the Bond Strength of Fiberglass
• GM9194P - Binder Content of Fiberglass Substrates
• GM9195P - Extensibility and Warp of Vacuum Forming Material (Vacuum Forming DOT Test)
• GM9196P - Circular Vacuum Test Procedure - Laminated Fabrics
• GM9197P - Thickness of Nonwoven Backed Vinyls
• GM9198P - Migration of Oils or Dyestuffs
• GM9199P - Firmness of Padding
• GM9200P - Accelerated Aging and Steaming
• GM9201P - Determination of Crease Resistance
• GM9202P - Procedure for Determining Heat Build-up of Insulating Material
• GM9203P - Drapeability of Sound Absorber Material
• GM9205P - Test for Tensile Strength of a Channeled Zipper Chain
• GM9206P - Coefficients of Friction of Soft Trim Material
• GM9207P - Fastening Strengths of Hook and Loop Tapes
• GM9208P - Cycle Life of Hook and Loop Tapes
• GM9209P - Trimethylamine in Fiberglass Parts
• GM9210P - Adhesion of Fiber Coating
• GM9214P - Test for the Staining of Trim Materials
• GM9215P - Test for Mildew Resistance of Paper and Wood Products
• GM9216P - Coating Adhesion of Vinyl Coated Materials
• GM9220P - Procedure for Color and Finish Inspection
• GM9221P - Flagging, Allowance and General Material Specification for Vinyl Tops
• GM9222P - Wear Resistance of Coated Genuine Leather
• GM9223P - Flagging, Allowance and General Material Specification for Interior Cut and Sewn Vinyl Coated Fabrics
• GM9224P - Flagging, Allowance and General Material Specification for Moldable Vinyls
• GM9225P - Extraction of Threads for Percent Lubricant and Percent Resin
• GM9226P - Flex Test for Decals
• GM9230P - Dimensional Stability of a Headlining Assembly
• GM9231P - Hydrolytic Stability
• GM9232P - Extensional Vibration Performance
• GM9233P - Repair Procedure for SMC
• GM9240P - Perspiration Resistance
• GM9300P - Impact Test for Plastic Materials (Instrumented or Non-Instrumented)
• GM9301P - Test for Intrinsic Melt Viscosity of Thermoplastic Resins
• GM9302P - Test for Stress Mark Susceptibility of Plastic Materials
• GM9303P - Mildew Resistance - Pink Stain Test
• GM9304P - Wear Resistance - RCA Wear Tester
• GM9305P - Determination of Fogging Characteristics of Automotive Interior Trim Materials
• GM9306P - Ash Content of Plastic Materials
• GM9307P - Aging Test for Vinyl Compounds and/or Parts
• GM9308P - Chemical Stress Resistance of Plastics
• GM9309P - Gravimetric Determination of Carbon Black in Nylon 6 and Nylon 66
• GM9310P - Variable Surface Temperature Heat Exposure Test
• GM9311P - Screen Analysis of Polystyrene Beads
• GM9312P - Total Moisture Content of Polystyrene Beads and Pellets
• GM9313P - Residual Pentane Content by Gas Chromatography
• GM9314P - Surface Waviness Evaluation - Loria Analyzer
• GM9315P - Sliding Entry Test
• GM9316P - Jounce and Squirm Test
• GM9317P - Water Repellency Test
• GM9318P - Test for Determining Acoustic Transparency of a Speaker Covering
• GM9319P - Accelerated Corrosion Test
• GM9320P - Pressure Testing of Nonmetallic Fuel Tanks
• GM9321P - Internal Stress in Nonmetallic Fuel Tanks
• GM9322P - Leak Testing of Nonmetallic Fuel Tanks
• GM9323P - Absorptivity of Hydrocarbons on Fluorinated Plastic Surfaces
• GM9324P - Internal Cleanliness of Nonmetallic Fuel Tanks
• GM9325P - Test Method for Determining the Sulfur Content of a Barrier Treated Nonmetallic Fuel Tank
• GM9326P - Weld Strength of Nonmetallic Fuel Tank Components
• GM9327P - Exterior Weatherability of Integrally Colored Plastics
• GM9328P - Mildew Resistance - Mixed Culture Method
• GM9329P - High Temperature Humidity Aging
• GM9330P - Foam Laminate Curl Test
• GM9331P - Weatherstrip Flock Fiber Density
• GM9332P - Tear Strip Test
• GM9333P - Trim Lip Load Force
• GM9334P - Weatherstrip Extraction for COF Applications
• GM9335P - Topcoat Adhesion Test for Finished Leather
• GM9336P - Breaking Strength of Narrow Textile Materials
• GM9337P - Test Method to Determine Fiber Weight Loss and Wear on Carpet
• GM9339P - Evaluation of Leather Dye Stain Resistance and Cleanability
• GM9450P - Test Procedure for Determining Water Permeability
• GM9451P - Test Procedure to Determine Warpage
• GM9452P - Test for Dimensional Stability
• GM9454P - Percent Asphalt Saturation of Roof Deadening Felt
• GM9500P - Gasoline Puddle Test for Gasoline Fill Areas
• GM9501P - Gasoline Dip Test for Painted Parts
• GM9502P - Knife Cross-Hatch Adhesion Test Procedure for Painted Elastomeric Plastic Substrates
• GM9503P - Evaluating Brittleness of Painted Plastics and Sealants by Means of a Mandrel
• GM9504P - Oven Aging Test Procedure for Painted Plastic Substrates
• GM9505P - Automotive Environmental Cycles
• GM9506P - Dime Scrape Test to Determine Paint Adhesion and Brittleness
• GM9507P - Thumbnail Hardness Test for Painted Parts
• GM9508P - Chip Resistance of Coating
• GM9509P - Solvent Rub Method for Determining Cure of Painted Metal or Plastic Substrates
• GM9510P - Galvanic Paint Adhesion Test Procedure for Metal Parts
• GM9511P - Scab Corrosion Creepback of Paint Systems on Metal Substrates
• GM9514P - Recommended Practice for Hot Water Immersion Testing
• GM9515P - Abrasion Resistance of Organic Coatings (Taber Abraser Method)
• GM9516P - Wear Resistance - Canvas Belt Wear Tester
• GM9517P - Resistance to Synthetic Perspiration
• GM9518P - Determining Paint Thickness of Painted Flexible Plastic Parts
• GM9519P - Flow Measurement for Pumpable Sealants
• GM9520P - Time Link-Up Test, Stationary Glass Primer to Paint
• GM9521P - Shear Adhesion Test for Adhesives Used in Glass Bonding Procedure
• GM9522P - Knife Quick Adhesion Test for Stationary Glass Bonding Materials to Paint
• GM9523P - Conductivity Test of Coated Plastic Parts
• GM9524P - Test for Solvent Barrier Properties of Primer
• GM9525P - Thermal Shock Test for Paint Adhesion
• GM9526P - Measuring Thickness of Gold Deposits
• GM9528P - Impact Test Exterior Body Side Moldings
• GM9529P - Vertical Rise Method of Determining Volume Change of Sealers
• GM9531P - Water Jet Tests
• GM9532P - Crater Resistance Test for Sheet Metal Forming Lubricants
• GM9533P - Resistance of Coatings to Chemical Etching and Distortion
• GM9534P - Ultraviolet/Visible Transmission Through Cured Paint Film
• GM9535P - Throw Power of Electrodeposition Primers
• GM9536P - Penetration Test for Corrosion Preventive Waxes
• GM9537P - Draw Bead Simulator Testing
• GM9538P - Weathering Exposure Tests for Interior Trims
• GM9540P - Accelerated Corrosion Test
• GM9541P - Visual Discontinuity Inspection Procedure for Automotive Glazing Materials
• GM9542P - Wear Resistance of Hot Stamps & Related Products by the Falling Sand Method
• GM9543P - Test for Raveling of Netting
• GM9544P - Procedure for Inspecting Surfaces of Parts and Molds
• GM9600P - Car Wash Simulation Test
• GM9611P - Effect of Sheet Metal Forming Lubricants on the Phosphate System
• GM9612P - Lubricant - Electrocoat Primer Compatibility
• GM9613P - Zinc Phosphate Crystal Size Determination Using "Faxfilm" Replication
• GM9615P - Panel Preparation for Weld Compatibility Test for a Sheet Metal Forming Lubricant
• GM9616P - Sheet Metal Forming Lubricant - Compatibility with Zinc-Rich Weld-Through Primer
• GM9617P - Corrosion Test for Sheet Metal Forming Lubricants
• GM9618P - Fume Yellowing of Top Coat from Cathodic ELPO
• GM9619P - Cyclic Chipping Test
• GM9621P - Welding Process Control Procedure
• GM9623P - Flocked Fabric Bond to Door Glass Run Channels/Stabilizer Peel Strength Procedure
• GM9624P - Cure Rate of Adhesives for Bonding Stationary Glass by Tensile Adhesion Test
• GM9625P - Preparation of Acid Rain Solution
• GM9626P - Pump Shear Test - ELPO
• GM9627P - Method for Fiberglass Insulation Fallout Measurement
• GM9628P - Double Vision Inspection Procedure for Windshields
• GM9631P - Horizontal Settling of Cathodic ELPO with No Agitation
• GM9632P - Edge Coverage Test for Cathodic ELPO
• GM9633P - Horizontal Settling of Cathodic ELPO with Agitation
• GM9635P - Dust-Out from Fiber Sound Absorber Pad
• GM9636P - Bake Off Loss of Solids of Cathodic ELPO
• GM9637P - Vibration Test for Adhesive for Bonding Stationary Glass to Paint
• GM9639P - Tensile Test for Safety Belt Anchor Bolts
• GM9640P - Water Absorption Test for Adhesives and Sealants
• GM9641P - Push Out Force Test for Sealants and Adhesives
• GM9642P - ELPO - 30 Day Stability Test
• GM9643P - Shrinkage of Heat-Bonding Sheet Form Materials
• GM9644P - Corrosion Protection by Grease in Humidity Cabinet
• GM9645P - Ultrasonic and Thermal Cycle Test
• GM9646P - Delamination Test for Cathodic ELPO
• GM9647P - Procedure for Crowbar Testing Structurally Bonded Plastic Assemblies
• GM9648P - Determination of the Modulus of Rigidity in Shear for Adhesives Used in Glass Bonding Applications
• GM9649P - Repair Procedure for RRIM Fascias
• GM9650P - Horizontal Expansion Test for Gap Filling Expandable Sealers
• GM9651P - Electrochemical Resistance of Elastomeric Compounds
• GM9652P - Resistance to Pilling of Automotive Upholstery
• GM9653P - Pressure Sensitive Adhesive Compatibility with Topcoat Paint Systems
• GM9655P - Body Perforation Corrosion Test
• GM9656P - Evaluating ELPO Primer Thickness Inside of Body Cavities
• GM9659P - Fuel Resistance Test
• GM9661P - Delamination Test for Primer Surfacer
• GM9664P - Pliability
• GM9665P - Permeability Test for Low Permeation Fuel Filler Hose
• GM9668P - Test Method for Determination of the Drip Performance of Hot Melt Wax
• GM9669P - Body Perforation Corrosion Test
• GM9672P - Plasticizer Migration - Body Side Moldings
• GM9674P - Procedure to Verify That Heat Stakes Resist a Minimum Tensile Load
• GM9675P - Test for Dynamic Flex Fatigue
• GM9676P - Procedure for Qualifying Quick - Connector Fittings for Vapor Fuel Line
• GM9677P - Test Method for Bursting Strength of Convenience Net Assemblies
• GM9678P - Test Methods for Static Loading of Convenience Net Assemblies
• GM9679P - Indentation Load Deflection (I.L.D.) Test for Elastomeric Seat Suspension Systems
• GM9680P - Ultimate Load/Bond Strength Test for Elastomeric Seat Suspension Systems
• GM9681P - Creep Test for Elastomeric Seat Suspension Systems
• GM9682P - Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim
• GM9683P - Arc/Laser Welding Verification Study
• GM9684P - Procedure For Evaluating Parting Lines
• GM9685P - Impact Test for Energy Management Plastic Foam
• GM9688P - Grained Surface Cleanability Test
• GM9689P - Asphalt Staining Test
• GM9690P - Evaluation of Paint, Sag, Pop and Strike-in Properties
• GM9691P - Wear Resistance Test for Weatherstrip
• GM9692P - Determination of Formaldehyde in Fiberglass Parts
• GM9693P - Test for Cavity Fillability of Acoustic Foams
• GM9696P - Can Test for Staining of Paint on Plastics
• GM9698P - Test for Cure State of Elastomers
• GM9700P - Powder Impact Fusion Test
• GM9701P - Powder Paint Compatibility with Other Powder Paints
• GM9703P - Powder Paint Resistance to Back Ionization
• GM9705P - Standard Powder Material and Equipment Configuration
• GM9706P - Finesse Polish Evaluation of Clearcoats
• GM9707P - Scratch Resistance of Clearcoats
• GM9708P - Car Polish Cleanability of Grain Types
• GM9709P - Paint Material Odor Assessment - Olfactometry
• GM9730P - Determination of Moisture Content of Phenolics by Distillation
• GM9731P - Chemical Analysis of Salt Spray Solution
• GM9733P - Determination of Coating Weight on Phosphated Panels
• GM9734P - Chrome Passivation Test
• GM9735P - Qualitative Analysis of Plasticizers in Polyvinyl Chloride (PVC) Moldings
• GM9736P - Sulfur Dioxide Spot Test
• GM9737P - Intrinsic Viscosity Measurement of Polycarbonate Resin
• GM9738P - Zinc Content of Zinc-Rich Primer
• GM9739P - UV Stabilizer Content of Polyvinyl Chloride
• GM9740P - Acrylonitrile, Styrene and Butadiene Compositions in ABS Polymers
• GM9741P - Instrumental Color Measurement
• GM9742P - Cigarette Smoke Resistance of Nonlacerative Windshield Coatings
• GM9743P - Dialkyl Phthalate Absorption by Nonlacerative Windshield Coatings
• GM9744P - Compatibility of Windshield Primer with Nonlacerative Windshield Coatings
• GM9745P - Analysis of Wood Fiber Material
• GM9746P - Compatibility of Common Cleaners with Alternate Glazing Materials
• GM9748P - Non-Staining Characteristics of Adhesives
• GM9749P - Sag Resistance
• GM9751P - Side Impact Test
• GM9753P - Tensile and Shrinkage Test for Expanding Adhesives and Sealers
• GM9754P - Dimpling Properties of Plastisol Structural Adhesives
• GM9756P - Vacuum Forming Adhesive for Unsupported Expanded Vinyl to Wood Fiber and Other Plastic Substrates
• GM9758P - Adhesion and Durability of Exterior Trims
• GM9760P - Test for Plasticizer Migration - Body Side Moldings
• GM9761P - Pressure Stability
• GM9763P - Stability of Adhesives and Sealers
• GM9764P - Test for Measuring the Ramp Expansion of Sealers
• GM9765P - Determination of NCO Content in Isocyanates
• GM9769P - Qualification Procedure for Uncoated and Coated Sheet Steels
• GM9770P - Weatherstrip Coating Cure Test
• GM9771P - Procedure for Determining Fiber Degradation of Automotive Textiles
• GM9772P - Vacuum Forming Adhesive for Unsupported Expanded Vinyl
• GM9773P - Cold Slam Test
• GM9774P - Molding and Emblem Adhesion Test Pluck Resistance
• GM9775P - Tensile Test for Adhesion for Bonding Stationary Glass
• GM9791P - Water Leak Test for Weatherstrip Sealer
• GM9795P - Adhesion and Durability of Bonded Weatherstrip - Pressure Sensitive Adhesive
• GM9797P - Cleavage Peel Test
• GM9798P - Pressure Sensitive Adhesive Coated Vinyl Roof Covers and Pads
• GM9799P - Smoke Test
• GM9801P - Panel Preparation Procedure for Sealants
• GM9802P - Adhesion Test for Sealants
• GM9803P - Wash-Off Test for Spray-On Deadeners
• GM9804P - Wash Off Resistance
• GM9805P - Corrosion Test for Vinyl Coated Fabric Roof Covers
• GM9807P - Adhesive - Assembling Composite Overlap Shears
• GM9828P - Smoke Causing Emissions from Paint and Sealers
• GM9831P - Flame Resistance Test for Adhesives and Sealers
• GM9832P - Odor Acceptability - Can Test
• GM9833P - Flammability Test for Engine Compartment Sound Absorbers
• GM9834P - Testing Adhesion of Clips/Hardware Bonded to Glass
• GM9836P - 6 Degrees Bent Panel Test
• GM9837P - Tape Wet-Out Test
• GM9838P - Tape Lamination to Automotive Components
• GM9839P - Qualification Procedure for Magnesium Alloy Ingot Producers
• GM9840P - Measurement of Acoustic Output of Dynamic Trim and Sealing Components Involved in Shear Movement
• GM9842P - Measurement of Acoustic Output of Dynamic Trim and Sealing Components Involved in Shear Movement
• GM9882P - Insertion-Extraction - WeatherstriP -
• GM9883P - Load Loss Set - Weatherstrips
• GM9885P - Standard Test Method for Compression Load Deflection Measurements on Weatherstrips
• GM9888P - Water Absorption - Weatherstrips
• GM9889P - Coating Cure Test
• GM9890P - Separation of the Bulb from the Carrier - Weatherstrips
• GM9891P - Coefficient of Friction
• GM9892P - Adhesion Of Interior Walls - Weatherstrips
• GM9893P - Splice Strength of Weatherstrips
• GM9894P - Freeze Characteristics of Weatherstrips
• GM9895P - Compatibility with Mating Weatherstrips
• GM9896P - Adhesion of Weatherstrips to Paint, Paint Staining and Wrinkle Resistance
• GM9897P - Adhesion of Weatherstrips to Glass and Wrinkle Resistance
• GM9898P - Heated Backlite Element Compatibility - Weatherstrips
• GM9899P - Test for Insertion and Sag Resistance of Weatherstrip Sealers
• GM9900P - Cleaning/Solvent Resistance of Automotive Components During Normal Customer Use
• GM9901P - Adhesive Sample Preparation for Metallic Substrates
• GM9902P - Noncontact Staining Measurement of Elastomers
• GM9904P - Multi-Axial Impact Test
• GM9905P - Test for Wear Resistance of Elastomers
• GM9907P - Interior Trim Hand Peel Strength Procedure
• GM9908P - Sliding Resistance for Side Window Weatherstrips
• GM9909P - Seals Abrasion Resistance
• GM9910P - Guide to Identifying Adhesive Failure Modes
• GM9911P - Scuff Resistance Test for Painted Plastics
• GM9912P - Evaluation of Electrodeposition Coating by Torque Tension Testing of Threaded Joints
• GM9913P - Sealer Material Dispense Test
• GM9915P - Flow Rate Testing of Powder Coatings
• GM9916P - Sag and Sliding Test for Sealers
• GM9917P - Procedure for Determining Tack-Free Time for 1 and 2 Component Ambient Curing Adhesives
• GM9918P - High Temperature Bond Retention of Anti-Flutter Roof Bow Adhesive
• GM9920P - Secondary Work Embrittlement Test Procedure
• GM9921P - Wash Resistance Test for Sealers - Exposed Application
• GM9927P - Qualification Procedure for Aluminum Sheet
• GM9928P - Procedure for Projection Weld Fastener Evaluation
• GM9929P - Material Welding Performance of Weld Through Tape Sealer
• GM9930P - Material Welding Performance of Pumpable Weld Through Sealer
• GM10200D - Drafting Templates
• GM10201D - EYELLIPSE TEMPLATES
• GM10202D - Head Position Contour Templates
• GM10203D - Three-Dimensional H-Point Machine
• GM10204D - Vehicle Set Up Procedures
• GM10205D - Dimension Codes and Terms
• GM10206D - Dimension Definitions
• GM10207D Interior Dimensions - Width Description - Passenger Car
• GM10208D Interior Dimensions - Height Description - Passenger Car
• GM10209D Interior Dimensions - Length Description - Passenger Car
• GM10211D Exterior Dimensions - Width Description - Passenger Car
• GM10212D Exterior Dimensions - Height Description - Passenger Car
• GM10213D Exterior Dimensions - Length Description - Passenger Car
• GM10214D Ground Clearance Dimensions - Height Description - Passenger Car
• GM10219D - Truck Interior Dimensions, Engine Compartment Width, Height and Length
• GM10220D Truck Exterior Dimensions - Width
• GM10221D Truck Exterior Dimensions - Height
• GM10222D Truck Exterior Dimensions - Length
• GM10244D - Dimensions for Typical Items Carried in Trunk/Cargo Areas (other than, SAE Luggage)
• GM10245D - Dimensions for Typical Items Carried in Interior Stowage Compartments
• GM10246D Tools - Coporate Design Packaging
• GM10249D - Miscellaneous - Measuerment Procedures
• GM10250D - Dimension Index - Alphabetical and Numerical Listings
• GM10251D - Knee Restraint Zone Development Procedures - Driver and Front Seat Passenger
• GM10252D GM/UMTRI - Packaging Model Application and Accommodation Interpretation
• GMN3943 - Scratch and Mar Resistance of Plastics, Five Arm Test
• GMN4709 - Test Method for Determining Material Abrasion Resistance when Used with the Passive Occupant Detection System-A Surface (PODS-A).
• GMN4908 - Fuel Fill Hose Sealing Test
• GMN4911 - Fuel Fill Hose Pull-Off Test
• GMN4912 - Fuel Fill Hose Push-On Test
• GMN4913 - Fuel Fill Hose Stiffness Test
• GMN4947 - Coating Thickness on Sponge and Dense Weatherstrips
• GMN6752 - Test Method To Quantify Foreign Material On Engine and Transmission Components/Assemblies
• GMN6753 - Tensile Properties of Injection Molded Short Glass - Fiber Reinforced Thermoplastics for use in Finite Element Analysis of Long Flow Length Parts
• GMN6814 - Standard Test Methods for Vulcanized Rubber and TPE for Use in Finite Element Analysis Modeling
• GMN8170 - Resistance To Blocking
• GMN8495 - Label Application to Automotive Components
• GMN10030 - Belt Abrasion Wear Test
• GMN10033 - Sunscreen Lotion Resistance of Interior Coatings
• GMN10041 - Kapuskasing Drop Impact Test for Finished Leather
• GMN10047 - Inner Pressure Burst Test for Mechanical Tubing for Hydroforming
• GMN10059 - Cleaning and Solvent Resistance of Weatherstrips During Normal Customer Use
• GMN10072 - Process Approval and Personnel Qualification for Ultrasonic Testing of Resistance Spot Welds
• GMN11174 - Quantify Cleanliness of Sand Cast Cylinder Blocks and Heads