| |
FORD - Plastics/Elastomers (VOLS. 5, 6, 7) Collection
 |
|
Description:
FORD - Plastics/Elastomers (VOLS. 5, 6, 7) Collection contains more than 1600 documents.
A major automotive company may rely on many original equipment manufacturers (OEMs) for essential components. These documents describe detailed specifications for automotive parts and materials used by the Ford Motor Company in the categories of plastics and elastomers. Specification in these volumes included, but are not limited to:
- Plastic hosing & nylon tubing
- Foams
- Resins
- Moldings
- Elastomers
- Other polymer-based components
Online Access - Subscribers get secure online access to search, view, bookmark, track, and print documents according to the license agreement. Online documents are updated daily. Multiple users can share a single license. You also get access to IHS Standards bibliographic data – more than 1 Million documents.
Individual Documents - IHS sell individual documents through the IHS Store in electronic or hard copy formats. Statistics show that 1 out of every 5 people who purchase individual documents would benefit from an online subscription. You should consider a collection over individual document purchases if your company buys more than $3,000 in standards per year. |
Single Document Pricing
Document price is based on page count and publisher. Click on a document below and then on "Document Pricing" to see a price.
 | | |
Popular Standards from this Collection.
|
FORD WSS-M4D638-B |
POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D638-A |
POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSS-M4D585-B |
ABS/POLYCARBONATE BLEND (ABS + PC), IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D836-A |
ABS, HIGH HEAT, ELECTROPLATING GRADE MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD EEMS INDEX VOL 7 |
WORLDWIDE & EUROPEAN PRODUCT ENGINEERING MATERIAL SPECIFICATIONS VOLUME 7 - PLASTICS |
|
FORD WSK-M4D827-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT, LOW GLOSS, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D706-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED MOLDING COMPOUND |
|
FORD WSH-M4D293-B2 |
POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 20% MINERAL FILLED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D666-A |
POLYAMIDE 66 (PA66), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Replaces ESA-M4D379-A and ESA-M4D379-B |
|
FORD WSK-M4D648-A |
POLYAMIDE (PA) 66, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Replaces by ESA-M4D267-A, ESF-M4D335-A and ESP-M4D342-A |
|
FORD WSK-M4D745-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, HIGH IMPACT STRENGTH, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D635-A2 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 7 - 15 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D635-A1 |
|
FORD WSK-M4D673-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD M99P1111-A*** |
|
FORD WSB-M4D813-A |
POLYCARBONATE + ABS BLEND, (PC+ABS) HIGH IMPACT, PLATING GRADE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D550-A10 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, MOLDED IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 25% MINERAL FILLED, MEDIUM HIGH IMPACT, HIGH SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-REPLACES ESK-M4D499-A |
|
FORD WSK-M4D647-A |
POLYAMIDE (PA) 66 MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D648-A |
|
FORD WSK-M4D672-A |
POLYAMIDE (PA) 6, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-1*** |
|
FORD ESB-M4D241-B |
ABS, ELECTROPLATING GRADE, HEAT RESISTANT HIGH STRENGTH |
|
FORD ESB-M4D483-A1 |
ABS, MEDIUM IMPACT-COLOR PIGMENTED - LOW GLOSS - UV STABILIZED - INTERIOR |
|
FORD WSB-M4D690-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, UV STABILIZED, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D267-A |
NYLON (TYPE 6/6), MODIFIED - HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D833-A |
ACRYLONITRILE STYRENE ACRYLATE (ASA), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ** TO BE USED WITH WSS-M99P1111-A ** |
|
FORD WSS-M4D492-B1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 15% MINERAL, COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, HIGH MODULUS, MOLD IN COLOR AND PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D308-A |
POLYPROPYLENE, HIGH IMPACT GRADE - INJECTION MOLDING |
|
FORD WSS-M4D638-C |
POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D822-A2 |
POLYAMIDE 6 (PA6), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D664-A2 |
POLYAMIDE (PA) 6, HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D349-B |
NYLON (TYPE 66), 13% FIBERGLASS REINFORCED - IMPACT MODIFIED, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D500-A |
POLYPROPYLENE (PP) COPOLYMER, MEDIUM IMPACT, COLOR PIGMENTED, LOW GLOSS, INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSK-M4D664-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D993-A |
|
FORD WSK-M4D663-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, 33% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD WSS-M4D240-A2 |
COATING, POWDERED, THERMOPLASTIC NYLON (TYPE 11 OR 12)***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D952-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED MOLDING COMPOUND, UV STABILIZED, MOLD-IN-COLOR, PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D961-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, LOW CLTE, FOR MOLDED-IN-COLOR AND FULLY-PAINTED APPLICATIONS, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD ESF-M4D100-A1 |
POLYCARBONATE (PC), GENERAL PURPOSE GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D293-B |
POLYPROPYLENE, 20% TALC FILLED - HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D637-A2 |
ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 11-17 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D637-A1 |
|
FORD WSK-M4D644-A |
POLYPROPYLENE (PP), HOMOPOLYMER, 40% MINERAL FILLED, CONTROLLED RHEOLOGY (CR) GRADE |
|
FORD WSK-M4D761-A2 |
POLYCARBONATE (PC), HIGH MELT FLOW RATE MOLDING COMPOUND, INTERIOR |
|
FORD WSK-M4D792-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D492-B2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 15% MINERAL, HIGH MELT FLOW, FULLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D961-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 12% MINERAL, COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, LOW CLTE, MOLD-IN-COLOR AND PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D556-A3 |
POLYPROPYLENE COPOLYMER, 22 % MINERAL FILLED, MEDIUM SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR-Shown on WSK-M4D556-A |
|
FORD WSK-M4D776-A1 |
ACRYLIC (PMMA), HEAT RESISTANT, OPTICAL GRADE MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D840-A1 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 5 - 11, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSS-M2D380-B1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED EXTERIOR WEATHERABLE 73 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D378-B1 |
|
FORD EMS INDEX VOL 7 |
PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 7 - PLASTICS |
|
FORD WSD-M2D379-A1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 68 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A1 |
|
FORD WSK-M4D792-A2 |
ABS, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D961-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A ***-Use WSS-M4D492-B1 or WSS-M4D952-A2 |
|
FORD ESA-M4D293-A |
POLYPROPYLENE, 20% TALC FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D483-A2 |
ABS, MEDIUM IMPACT-HEAT RESISTANT - COLOR PIGMENTED - LOW GLOSS - UV STABILIZED INTERIOR-Shown on ESB-M4D483-A1 |
|
FORD ESF-M4D236-A |
ABS MOLDING COMPOUND ***TO BE USED WITH FORD M99P1111-A*** |
|
FORD WSD-M2D380-A1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 76 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A1 |
|
FORD WSK-M4D604-A |
POLYPROPYLENE (PP), COPOLYMER, CONTROLLED RHEOLOGY (CR) GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSK-M4D648-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M99D63-A3 |
THERMOPLASTIC ELASTOMER, FLOOR COVERING, GRAINED, SHAPED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD EMS INDEX VOL 6 |
PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 6 - PLASTICS |
|
FORD ESB-M4D383-A2 |
POLYOLEFIN COPOLYMER, LOW DENSITY - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D383-A1; Use WSS-M4D952-A2 |
|
FORD WSK-M4D644-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 40% MINERAL MIX FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD EEMS INDEX VOL 6 |
WORLDWIDE & EUROPEAN PRODUCT ENGINEERING MATERIAL SPECIFICATIONS VOLUME 6 - PLASTICS |
|
FORD ESB-M4D585-A |
ABS/POLYCARBONATE BLEND (ABS + PC), IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D635-A1 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 0.7 - 4 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D637-A1 |
ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 1-3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D644-A4 |
POLYPROPYLENE (PP) HOMOPOLYMER, 40% MINERAL MIX FILLED HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D954-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 30% MINERAL FILLED, COLOR PIGMENTED, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D379-A |
NYLON (TYPE 6/6), MODIFIED - HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D189-A2 |
WEATHERSTRIP, EXPANDED EPDM, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D402-A3 |
POLYURETHANE (PUR) FOAM, HIGH RESILIENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D419-A |
CELLULAR ELASTOMER, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D725-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 30% GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD ESA-M4D200-B |
POLYURETHANE (PUR) FOAM, FLEXIBLE, RESTRICTED FLOW |
|
FORD ESA-M4D281-A |
POLYPROPYLENE, GENERAL PURPOSE - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-USE ESB-M4D308-A |
|
FORD ESE-M4D287-B |
NYLON (TYPE 66), 33% GLASS FIBER REINFORCED - HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D732-A3 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D924-A |
POLYCARBONATE + ACRYLONITRILE/BUTADIENE/STYRENE BLEND (PC+ABS), HIGH LOW TEMPERATURE IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D556-A |
POLYPROPYLENE COPOLYMER, 22 % MINERAL FILLED, INTERIOR |
|
FORD WSK-M4D729-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, MELT FLOW RATE 1.5 - 4.0 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D761-A |
POLYCARBONATE (PC) MEDIUM MELT FLOW RATE MOLDING COMPOUND, INTERIOR |
|
FORD WSS-M4D666-A2 |
POLYAMIDE 66 (PA66), IMPACT MODIFIED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D941-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND, LUBRICATED AND HEAT STABILIZED WITH 25% MINIMUM RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D961-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 12% MINERAL, HIGH MELT FLOW, LOW CLTE, FULLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D841-A |
POLYPROPYLENE (PP) COPOLYMER, 15 % MINERAL FILLED, COLOR PIGMENTED, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D660-A |
POLYPROPYLENE (PP) COPOLYMER, COLOR PIGMENTED INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSK-M4D822-A |
POLYAMIDE 6 (PA6), HEAT STABILIZED, 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D827-A2 |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT, LOW GLOSS, INTERIOR *** TO BE USED WITH WSS-M99P1111-A *** |
|
FORD WSS-M4D293-B3 |
POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M4D638-B |
|
FORD WSS-M4D706-A3 |
POLYAMIDE 66 (PA66), HEAT STABILIZED, IMPACT MODIFIED, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSS-M4D729-A3 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% TALC FILLED, INJECTION MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D979-A |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND, UNPAINTED AIRBAG COVER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D189-A |
POLYAMIDE (PA) 6 OR 66, 13% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D665-A5 |
|
FORD WSB-M4D923-A |
POLYCARBONATE + ACRYLONITRILE/BUTADIENE/STYRENE BLEND (PC+ABS) MOLDING COMPOUND,INTERIOR ***TO BE USED WITH FORD WSS-M99P111-A*** |
|
FORD WSD-M2D378-A1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 60 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D556-A4 |
POLYPROPYLENE COPOLYMER, 20 % MINERAL FILLED, HIGH SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR-Shown on WSK-M4D556-A |
|
FORD WSK-M4D642-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 30% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD WSS-M4D952-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED, REACTOR GRADE MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2, and WSS-M4D952-A3 |
|
FORD ESA-M4D379-B |
NYLON (TYPE 6/6), MODIFIED - HEAT STABILIZED HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESA-M4D379-A; |
|
FORD ESB-M4D133-A |
NYLON, GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D101-A |
NYLON (TYPE 6), HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D150-A |
NYLON (TYPE 66) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D456-A |
POLYURETHANE (PUR) FOAM, CAST ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D689-A1 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 80 A HARDNESS, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D706-A2 |
POLYAMIDE 66 (PA66), HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D731-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% GLASS FIBRE REINFORCED, MELT FLOW RATE 1.0 - 3.0 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D752-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, COOLING AGENT RESISTANT, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D827-A3 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND |
|
FORD WSS-M4D911-B |
POLYPROPYLENE (PP) COPOLYMER, HIGH IMPACT 100 % RECYCLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D300-A |
ABS MOLDING COMPOUND, HIGH IMPACT - HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D373-A |
ABS, HIGH TEMPERATURE, MOLDING COMPOUND |
|
FORD WSA-M4D768-A |
PPOLYAMIDE (PA) 66, HEAT STABILIZED, 33% GLASS FIBER REINFORCED, TRANSLUCENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D841-A3 |
POLYPROPYLENE (PP) COPOLYMER, 13% TALC FILLED COLOR PIGMENTED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A1 |
HOSE, EPDM RUBBER, PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO- CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D591-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED, 14% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D712-A1 |
THERMOPLASTIC ELASTOMER (TPE), POLYOLEFIN, EPDM RUBBER MODIFIED, 50 DUROMETER D HARDNESS***TO BE USED WITH FORD WSS-M99P1111-a***-Use WSS-M2D382-B1 |
|
FORD WSK-M4D732-A2 |
POLYPROPYLENE (PP) homopolymer, 30% GLASS FIBRE REINFORCED, MELT FLOW RATE 10 - 18 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D993-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D891-A1 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M99D57-B |
POLYURETHANE (PUR) FOAM, PRESSURE SENSITIVE ADHESIVE, LOW PERMEABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D651-A2 |
POLYPROPYLENE (PP) COPOLYMER, 10 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D684-A2 |
ABS/PC BLEND, MEDIUM IMPACT STRENGTH MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D719-A |
POLYAMIDE (PA) 66, 38% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D823-A |
|
FORD WSK-M4D729-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, MELT FLOW RATE 12 - 22 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D776-A2 |
ACRYLIC (PMMA), HEAT RESISTANT, OPTICAL GRADE MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D938-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D34-A |
THERMOPLASTIC POLYURETHANE (TPU) FORMED INSTRUMENT PANEL ASSEMBLY *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD ESA-M4D134-A |
POLYPROPYLENE (PP), MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M4D638-B |
|
FORD ESA-M4D166-A |
POLYPROPYLENE, TALC FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D354-A1 |
POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D9-A |
ACRYLIC RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M96D36-A1 |
HOSE, HIGH PRESSURE, HIGH TEMPERATURE RESISTANT, POWER STEERING-REPLACES ESL-M2D281-A |
|
FORD WSB-M4D734-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MOLDING COMPOUND, PAINTED APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D908-A |
ACRYLONITRILE BUTADIENE STYRENE (ABS), POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D22-B |
POLYVINYL CHLORIDE (PVC), DRY BLEND SLUSH/POLYURETHANE (PUR) FOAM, FORMED INSTRUMENT PANEL ASSEMBLY **TO BE USED WITH FORD WSS-M99P1111-A**-Use WSS-M15P45-A |
|
FORD WSD-M2D243-A4 |
POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D670-A |
POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D823-A |
POLYAMIDE 66 (PA66), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D873-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 10% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D644-A3 |
POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 40% MINERAL FILLED, CONTROLLED RHEOLOGY, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D980-A |
FLEXIBLE COVERSTOCK, EXTRUDED THERMOPLASTIC POLYOLEFIN (TPO), INSTRUMENT PANEL *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M96D45-B |
HOSE, LOW PRESSURE, POWER STEERING RETURN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D246-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE HIGH MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D246-A1 |
|
FORD ESB-M2D304-A |
POLYURETHANE FOAM, ACOUSTICAL, OPEN FINE CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D100-A2 |
POLYCARBONATE (PC), OPTICAL GRADE - COATED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESF-M4D100-A1 |
|
FORD ESB-M4D175-A |
POLYPROPYLENE (PP), MEDIUM IMPACT - MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-USE ESA-M4D190-A |
|
FORD ESE-M4D287-A |
NYLON (TYPE 6/6), 33% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D470-A1 |
DUCT, EPDM, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D416-A |
POLYURETHANE (PUR) FOAM, MOLDED HIGH RESILIENCE ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD WSK-M4D641-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 25% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D653-A |
|
FORD WSK-M4D686-A |
POLYPROPYLENE (PP), HOMOPOLYMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSS-M2D378-B1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED EXTERIOR WEATHERABLE 60 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D556-A6 |
POLYPROPYLENE COPOLYMER, 22 % MINERAL FILLED, EXTERIOR |
|
FORD WSS-M4D952-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED MOLDING COMPOUND, FULLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D995-A |
THERMOPLASTIC POLYOLEFIN (TEO) MOLDING COMPOUND, COLOR PIGMENTED, UV STABILIZED, FOR HIGH GLOSS (CLASS |
|
FORD EMS INDEX VOL 5 |
PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 5 - ELASTOMERS |
|
FORD ESA-M4D190-A |
POLYPROPYLENE, GENERAL PURPOSE - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-USE ESB-M4D308-A |
|
FORD ESB-M2D243-A |
POLYURETHANE FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D280-A |
SILICONE ELASTOMER, INHERENTLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D145-A |
POLYETHYLENE (PE), LINEAR, BLOW MOLDING COMPOUND |
|
FORD ESB-M4D251-A |
ABS - POLYCARBONATE MOLDING COMPOUND - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M2D451-A2 |
HYDROGENATED NITRILE (HNBR) RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D815-A1 |
POLYPROPYLENE (PP) FOAM, CLOSED CELL, LOW DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D911-A |
POLYPROPYLENE (PP) COPOLYMER, 100% RECYCLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D441-A |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D665-A2 |
POLYAMIDE (PA) 6, 15% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D695-A |
POLYETHYLENE (PE), MOLDING COMPOUND, HIGH DENSITY, LOW MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D703-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED, 33 % GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSK-M4D820-A2 |
POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL, 48 KG/M3***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D873-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 10% MINERAL FILLED, PAINTABLE VIRGIN AND/OR RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D504-A |
THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 57 DUROMETER A HARDNESS, INTERIOR OR EXTERIOR WEATHERABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D706-A4 |
POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED WEATHERABLE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D732-A5 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, 25% MINIMUM POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D45-A |
HOSE, LOW PRESSURE, POWER STEERING RETURN **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD EEMS INDEX VOL 5 |
WORLDWIDE & EUROPEAN PRODUCT ENGINEERING MATERIAL SPECIFICATIONS VOLUME 5 - ELASTOMERS |
|
FORD EMS INDEX VOL 7A |
PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 7 - PLASTICS |
|
FORD ESB-M4D240-A |
NYLON (TYPE 11), COATING |
|
FORD ESB-M4D299-A |
POLYPROPYLENE, GLASS FIBER REINFORCED INJECTION MOLDING COMPOUND - NATURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D82-A |
NYLON (TYPE 66) MOLDING COMPOUND, HIGH TEMPERATURE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D682-A3 |
ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D828-A |
POLYAMIDE 6 (PA6), MODIFIED, FLEXIBLE EXTRUSION MOLDING COMPOUND-Use WSS-M4D933-A1: 06/07/1995 |
|
FORD WSB-M4D845-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 5 % MINERAL FILLED MOLDING COMPOUND, INTERIOR |
|
FORD WSB-M4D857-A2 |
STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA), RUBBER MODIFIED, 16 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D867-A |
ABS + POLYCARBONATE (ABS +PC), 10 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D871-A1 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 55 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D871-A2 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D871-A1 |
|
FORD WSK-M2D460-A |
POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D642-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D645-A |
POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-REPLACES SS-M4D9572-A |
|
FORD WSK-M4D665-A |
POLYAMIDE (PA) 6, 15% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D665-A2 |
|
FORD WSK-M4D692-A1 |
THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, EXTRUSION MOLDING COMPOUND |
|
FORD WSK-M4D697-A1 |
ABS/POLYCARBONATE BLEND (ABS+PC), HIGH IMPACT STRENGTH, HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D714-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 27% MINERAL FILLED, COLOR PIGMENTED, |
|
FORD WSK-M4D714-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 27 % MINERAL FILLED MOULDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-REPLACES SK-M4D9942-A |
|
FORD WSK-M4D718-A |
POLYCARBONATE (PC) FILM, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D820-A |
POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL, 48 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D379-B1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED EXTERIOR WEATHERABLE 68 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D378-B1 |
|
FORD WSS-M4D960-A |
ABS + POLYAMIDE BLEND (ABS+PA) MOLDING COMPOUND INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D968-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER/MINERAL REINFORCED, MINIMUM 25% PCR AND/OR PIR CONTENT *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D969-A |
POLYPROPYLENE (PP) HOMOPOLYMER RESISTANT TO COOLING AGENTS *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D985-A2 |
FLEXIBLE COVERSTOCK, SLUSH MOLDABLE POLYVINYL CHLORIDE (PVC), DOOR TRIM PANEL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M99D56-A4 |
TUBING, POLYOLEFIN, HEAT SHRINKABLE, DUAL WALL, ADHESIVELY LINED, SEMI-RIGID, FLAME RETARDANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D151-A |
POLYETHYLENE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D338-A |
POLYPROPYLENE, GLASS REINFORCED - GLASS TO POLYMER CHEMICALLY LINKED-INJECTION MOLDING COMPOUND - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D492-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MINERAL FILLER CONTENT - COLOR PIGMENTED - PAINTED APPLICATIONS ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D492-A1; Use WSS-M4D492-B2 |
|
FORD ESF-M4D387-A |
POLYAMIDE 66 (PA66), HEAT STABILIZED IMPROVED TOUGHNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD SK-M98D9736-A |
POLYURTETHANE FOAM WITH INTEGRAL SKIN - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9706-A |
PLASTIC COATED METAL, EXTERIOR ***TO BE USED WITH WSS-M99P1111-A*** |
|
FORD WSB-M4D740-A2 |
POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) CALENDERED SHEET, VACUUM FORMABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D378-A4 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 48 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D378-A7 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 87 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D381-A1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 82 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A1 |
|
FORD WSD-M2D381-A2 |
THERMOPLASTIC ELASTOMER (TPE), POLYOLEFIN, EPDM RUBBER MODIFIED, MODERATE HEAT RESISTANT, FLAME RETARDANT, 82 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A4 |
HOSE, EPDM RUBBER, MODIFIED PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTROCHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M96D34-A1 |
|
FORD WSH-M4D917-A |
POLYAMIDE 6 (PA6), 33% GLASS/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D822-A |
|
FORD WSK-M4D618-A2 |
ACETAL (POM) COPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D643-A1 |
POLYPROPYLENE (PP), HOMOPOLYMER 40% MINERAL FILLED, MELT FLOW RATE 4-7 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D669-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, IMPACT MODIFIED, 13% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D591-A |
|
FORD WSK-M4D712-A2 |
THERMOPLASTIC ELASTOMER (TPE), POLYOLEFIN, EPDM RUBBER MODIFIED, 50 DUROMETER D HARDNESS, EXTERIOR-Use with WSS-M2D382-B1 |
|
FORD WSK-M4D795-A |
POLYAMIDE 66 (PA66), HEAT STABILIZED, MOLYBDENUM DISULFIDE FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D850-A |
POLYAMIDE 66 (PA66), 60 % GLASS FIBER REINFORCED MOLDING COMPOUND-Use WSB-M4D680-A: 11/11/2005 |
|
FORD WSS-M2D381-A4 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D713-A8 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 5% WOLLASTONITE FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D873-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 20% MINERAL FILLED, LOW THERMAL EXPANSION, HIGH IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D933-A1 |
POLYAMIDE 6 (PA6), IMPACT MODIFIED, HEAT STABILIZED EXTRUSION MOLDING COMPOUND ***TO BE USED WITH WSS-M99P1111-A*** |
|
FORD WSS-M4D939-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 33% TALC FILLED, 25% MIN RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D971-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), WSS-M4D971-A COLOR PIGMENTED, UV STABLILIZED, HIGH MELT FLOW, FOR MOLDED-IN-COLOR APPLICATIONS, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M99P9999-L |
2002 RESTRICTED SUBSTANCE MANAGEMENT STANDARD - LETTER TO SUPPLIERS |
|
FORD ESA-M4D197-A3 |
POLYETHYLENE (PE), HIGH DENSITY, GASOLINE RESISTANT, BLOW MOLDING GRADE |
|
FORD ESA-M4D472-A |
POLYPROPYLENE COPOLYMER, INJECTION MOLDED***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-C |
|
FORD ESB-M4D37-A |
POLYVINYL CHLORIDE (PVC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D413-A2 |
ABS, POLYCARBONATE MOLDING COMPOUND, ELECTROPLATING AND PAINTING GRADE |
|
FORD ESB-M4D74-A |
POLYETHYLENE, HIGH DENSITY INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M98D21-A |
POLYVINYL CHLORIDE (PVC), DRY BLEND SLUSH/ POLYURETHANE (PUR) FOAM, FORMED TRIM ASSEMBLY **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD ESF-M4D405-D |
POLYETHYLENE TEREPHTHALATE (PET), 35 % GLASS FIBER/MICA REINFORCED MOLDING COMPOUND-Shown on ESF-M4D405-B |
|
FORD SK-M99D9570-A |
PLASTIC DECORATIVE MOLDING, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4560-A |
DECORATIVE PLASTIC MOULDING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M4D688-A1 |
ABS + POLYCARBONATE BLEND (ABS+PC), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M4D785-A1 |
ABS + POLYCARBONATE BLEND (ABS+PC), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D713-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 4% MINERAL FILLED, HIGH IMPACT, PAINTABLE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A3 |
|
FORD WSB-M4D815-A2 |
POLYPROPYLENE (PP) FOAM, CLOSED CELL, MEDIUM DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D815-A1 |
|
FORD WSB-M98D18-B2 |
LAMINATE, POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) SKIN/ POLYPROPYLENE (TPO) FOAM/RIGID SUBSTRATE, FORMED TRIM ASSEMBLY **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSB-M99D63-A1 |
POLYPROPYLENE (PP) FLOOR MAT, GRAINED, FLAT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M4D651-A |
POLYPROPYLENE (PP), 10% MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 24% MINERAL FILLED HIGH IMPACT MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D578-A |
POLYAMIDE (PA) 6, IMPACT MODIFIED, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D670-A3 |
POLYPROPYLENE (PP) AND THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) BLEND, RECOMPOUNDED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D684-A1 |
ABS/PC BLEND, MEDIUM IMPACT STRENGTH MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D704-A1 |
POLYAMIDE (PA) 66, 40% MINERAL FILLED MOLDING COMPOUND-Replaces ESB-M4D353-A2 and ESB-M4D353-A4 |
|
FORD WSK-M4D731-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% GLASS FIBER REINFORCED, MELT FLOW RATE 10 - 18 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D732-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER REINFORCED, MELT FLOW RATE 0.5 - 4.0 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D745-A2 |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANCE HIGH IMPACT STRENGTH, EXTERIOR-REPLACES ESK-M4D447-A; ESK-M4D494-A |
|
FORD WSK-M4D775-A1 |
POLYCARBONATE (PC), MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D777-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH IMPACT, COLOR PIGMENTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D777-A1 |
|
FORD WSK-M4D783-A2 |
POLYPROPYLENE (PP) COPOLYMER, 20% MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D791-A1 |
ABS + POLYCARBONATE BLEND (ABS+PC), MEDIUM IMPACT STRENGTH MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D792-A3 |
ABS, HIGH HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M98D29-A |
COMPOSITE, FUEL TANK HIGH DENSITY POLYETHYLENE (PE-HD), LINEAR LOW DENSITY POLYETHYLENE (PE-LLD) TIE LAYERS, ETHYLENE VINYL ALCOHOL (E/VAL) BARRIER **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSS-M2D382-B1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED EXTERIOR WEATHERABLE 90 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D378-B1 |
|
FORD WSS-M2D491-A1 |
POLYURETHANE (PUR) FOAM, HIGH DENSITY, REDUCED KNUCKLING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D638-C2 |
POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-C |
|
FORD WSS-M4D713-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B2 |
|
FORD WSS-M4D865-A3 |
POLYPROPYLENE (PP) HOMOPOLYMER, 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND, HIGH PERFORMANCE, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D947-B1 |
POLYAMIDE (PA) 66, 25% GLASS FIBER REINFORCED, IMPACT MODIFIED, INTERNALLY LUBRICATED (PTFE), HEAT STABILIZED, MOLDED IN COLOR, MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D951-A2 |
POLYAMIDE (PA) 66 HEAT STABILIZED, 19% GLASS/MINERAL REINFORCED, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M4D951-A1 |
|
FORD ESA-M4D430-A |
POLYAMIDE 6 (PA6), HEAT STABILIZED, LOW FLEXURAL MODULUS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D672-A |
|
FORD ESA-M4D57-A |
POLYURETHANE (PUR) FOAM, OPEN FINE CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D614-A |
POLYVINYL CHLORIDE (PVC) PLASTISOL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D100-C1 |
POLYCARBONATE (PC), LOW TEMPERATURE IMPACT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D308-B |
POLYPROPYLENE, FOAMED EXTRUSION ***TO BE USED WITH FORD WSS-M99P1111-A***-USE ESB-M4D308-A |
|
FORD ESB-M4D317-A |
POLYVINYL CHLORIDE, INJECTION MOLDING COMPOUND, ELECTRICAL GRADE |
|
FORD ESB-M4D383-A1 |
POLYOLEFIN COPOLYMER, MODIFIED - EXTERIOR GRADE***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2 |
|
FORD ESB-M4D463-A |
POLYETHYLENE FOAM, CROSSLINKED |
|
FORD WSB-M4D41-C |
POLYVINYL CHLORIDE (PVC), LOWER FOGGING, HEEL PAD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D687-A |
ACRYLIC (PMMA) MOLDING COMPOUND, MEDIUM IMPACT RESISTANT, EXTERIOR, OPTICAL GRADE |
|
FORD WSB-M4D825-A |
POLYPROPYLENE (PP) COPOLYMER, 7 % MINERAL FILLED, COLOR PIGMENTED, LOW GLOSS MOLDING COMPOUND, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSB-M4D884-A1 |
POLYPROPYLENE (PP) COPOLYMER, 5% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D921-A |
POLYBUTYLENE TEREPHTHALATE + POLYETHYLENE TEREPHTHALATE BLEND (PBT +PET), 30 % GLASS/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D18-B1 |
LAMINATE, POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) SKIN/ POLYETHYLENE (PE) FOAM/ RIGID, SUBSTRATE, FORMED TRIM ASSEMBLY ***TO BE USED WITH FORD WSS-M99P111-A*** |
|
FORD WSB-M99D61-A2 |
DRY PAINT FILM LAMINATE, FINISHED PARTS, PLASTICS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D556-A2 |
POLYPROPYLENE (PP) COPOLYMER, 22% MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 24% MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D649-A |
POLYETHYLENE (PE) FOAM, CHEMICALLY CROSSLINKED, CLOSED CELL, 30 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D654-A2 |
POLYAMIDE 66 (PA66), HEAT STABILIZED, 40% GLASS SPHERE REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D660-A2 |
POLYPROPYLENE (PP) COPOLYMER, COLOR PIGMENTED GENERAL PURPOSE MOLDING COMPOUND***TO BE USED WITH DORD WSS-M99P1111-A***-Shown on WSK-M4D660-A; Use WSS-M4D638-B |
|
FORD WSK-M4D697-A2 |
ABS/POLYCARBONATE BLEND (ABS+PC), HIGH IMPACT STRENGTH, HIGH HEAT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D697-A1 |
|
FORD WSK-M4D698-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 33 DUROMETER D HARDNESS MOLDING COMPOUND |
|
FORD WSK-M4D713-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 6% MINERAL FILLED, HIGH IMPACT PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D750-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D775-A2 |
POLYCARBONATE (PC), MOLDING COMPOUND, OPTICAL GRADE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D775-A1 |
|
FORD WSK-M4D790-A |
POLYBUTYLENE TEREPHTHALATE + POLYCARBONATE BLEND (PBT +PC), 30 % GLASS FIBER REINFORCED MOLDING COMPOund ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D905-A1 |
ABS, HIGH IMPACT STRENGTH EXTRUSION MOLDING COMPOUND |
|
FORD WSK-M99D61-A1 |
LAMINATE, POLYMERIC DRY PAINT FILM, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D470-A5 |
DUCT, EPDM, LOW OIL SWELL, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M2D470-A1 |
|
FORD WSS-M4D550-A11 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) TALC FILLED, HIGH IMPACT, MOLDED IN COLOR, INTERIOR (SEAMLESS AIRBAG INSTRUMENT PANEL APPLICATIONS) - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D729-A4 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20 % TALC FILLED, INJECTION MOLDING COMPOUND, EXTERIOR |
|
FORD WSS-M4D833-A2 |
ACRYLONITRILE STYRENE ACRYLATE (ASA) MOLDING COMPOUND, EXTERIOR HIGH GLOSS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D857-A3 |
STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA), RUBBER MODIFIED, 16% GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSS-M4D929-A3 |
POLYBUTYLENE TEREPHTHALATE, 30 % GLASS FILLED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D932-A1 |
POLYPROPYLENE (PP) COPOLYMER BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D955-A |
POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D638-B |
POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D638-A |
POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSS-M4D585-B |
ABS/POLYCARBONATE BLEND (ABS + PC), IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D836-A |
ABS, HIGH HEAT, ELECTROPLATING GRADE MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD EEMS INDEX VOL 7 |
WORLDWIDE & EUROPEAN PRODUCT ENGINEERING MATERIAL SPECIFICATIONS VOLUME 7 - PLASTICS |
|
FORD WSK-M4D827-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT, LOW GLOSS, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D706-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED MOLDING COMPOUND |
|
FORD WSH-M4D293-B2 |
POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 20% MINERAL FILLED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D666-A |
POLYAMIDE 66 (PA66), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Replaces ESA-M4D379-A and ESA-M4D379-B |
|
FORD WSK-M4D648-A |
POLYAMIDE (PA) 66, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Replaces by ESA-M4D267-A, ESF-M4D335-A and ESP-M4D342-A |
|
FORD WSK-M4D745-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, HIGH IMPACT STRENGTH, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D635-A2 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 7 - 15 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D635-A1 |
|
FORD WSK-M4D673-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD M99P1111-A*** |
|
FORD WSB-M4D813-A |
POLYCARBONATE + ABS BLEND, (PC+ABS) HIGH IMPACT, PLATING GRADE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D550-A10 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, MOLDED IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 25% MINERAL FILLED, MEDIUM HIGH IMPACT, HIGH SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-REPLACES ESK-M4D499-A |
|
FORD WSK-M4D647-A |
POLYAMIDE (PA) 66 MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D648-A |
|
FORD WSK-M4D672-A |
POLYAMIDE (PA) 6, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-1*** |
|
FORD ESB-M4D241-B |
ABS, ELECTROPLATING GRADE, HEAT RESISTANT HIGH STRENGTH |
|
FORD ESB-M4D483-A1 |
ABS, MEDIUM IMPACT-COLOR PIGMENTED - LOW GLOSS - UV STABILIZED - INTERIOR |
|
FORD WSB-M4D690-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, UV STABILIZED, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D267-A |
NYLON (TYPE 6/6), MODIFIED - HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D833-A |
ACRYLONITRILE STYRENE ACRYLATE (ASA), MEDIUM HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ** TO BE USED WITH WSS-M99P1111-A ** |
|
FORD WSS-M4D492-B1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 15% MINERAL, COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, HIGH MODULUS, MOLD IN COLOR AND PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D308-A |
POLYPROPYLENE, HIGH IMPACT GRADE - INJECTION MOLDING |
|
FORD WSS-M4D638-C |
POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D822-A2 |
POLYAMIDE 6 (PA6), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D664-A2 |
POLYAMIDE (PA) 6, HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D349-B |
NYLON (TYPE 66), 13% FIBERGLASS REINFORCED - IMPACT MODIFIED, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D500-A |
POLYPROPYLENE (PP) COPOLYMER, MEDIUM IMPACT, COLOR PIGMENTED, LOW GLOSS, INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSK-M4D664-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D993-A |
|
FORD WSK-M4D663-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, 33% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD WSS-M4D240-A2 |
COATING, POWDERED, THERMOPLASTIC NYLON (TYPE 11 OR 12)***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D952-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED MOLDING COMPOUND, UV STABILIZED, MOLD-IN-COLOR, PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D961-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, LOW CLTE, FOR MOLDED-IN-COLOR AND FULLY-PAINTED APPLICATIONS, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD ESF-M4D100-A1 |
POLYCARBONATE (PC), GENERAL PURPOSE GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D293-B |
POLYPROPYLENE, 20% TALC FILLED - HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D637-A2 |
ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 11-17 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D637-A1 |
|
FORD WSK-M4D644-A |
POLYPROPYLENE (PP), HOMOPOLYMER, 40% MINERAL FILLED, CONTROLLED RHEOLOGY (CR) GRADE |
|
FORD WSK-M4D761-A2 |
POLYCARBONATE (PC), HIGH MELT FLOW RATE MOLDING COMPOUND, INTERIOR |
|
FORD WSK-M4D792-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D492-B2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 15% MINERAL, HIGH MELT FLOW, FULLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D961-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 12% MINERAL, COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, LOW CLTE, MOLD-IN-COLOR AND PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D556-A3 |
POLYPROPYLENE COPOLYMER, 22 % MINERAL FILLED, MEDIUM SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR-Shown on WSK-M4D556-A |
|
FORD WSK-M4D776-A1 |
ACRYLIC (PMMA), HEAT RESISTANT, OPTICAL GRADE MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D840-A1 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 5 - 11, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSS-M2D380-B1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED EXTERIOR WEATHERABLE 73 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D378-B1 |
|
FORD EMS INDEX VOL 7 |
PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 7 - PLASTICS |
|
FORD WSD-M2D379-A1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 68 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A1 |
|
FORD WSK-M4D792-A2 |
ABS, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D961-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A ***-Use WSS-M4D492-B1 or WSS-M4D952-A2 |
|
FORD ESA-M4D293-A |
POLYPROPYLENE, 20% TALC FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D483-A2 |
ABS, MEDIUM IMPACT-HEAT RESISTANT - COLOR PIGMENTED - LOW GLOSS - UV STABILIZED INTERIOR-Shown on ESB-M4D483-A1 |
|
FORD ESF-M4D236-A |
ABS MOLDING COMPOUND ***TO BE USED WITH FORD M99P1111-A*** |
|
FORD WSD-M2D380-A1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 76 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A1 |
|
FORD WSK-M4D604-A |
POLYPROPYLENE (PP), COPOLYMER, CONTROLLED RHEOLOGY (CR) GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSK-M4D648-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M99D63-A3 |
THERMOPLASTIC ELASTOMER, FLOOR COVERING, GRAINED, SHAPED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD EMS INDEX VOL 6 |
PRODUCT MATERIAL SPECIFICATIONS AND STANDARDS VOLUME 6 - PLASTICS |
|
FORD ESB-M4D383-A2 |
POLYOLEFIN COPOLYMER, LOW DENSITY - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D383-A1; Use WSS-M4D952-A2 |
|
FORD WSK-M4D644-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 40% MINERAL MIX FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD EEMS INDEX VOL 6 |
WORLDWIDE & EUROPEAN PRODUCT ENGINEERING MATERIAL SPECIFICATIONS VOLUME 6 - PLASTICS |
|
FORD ESB-M4D585-A |
ABS/POLYCARBONATE BLEND (ABS + PC), IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D635-A1 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 0.7 - 4 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D637-A1 |
ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 1-3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D644-A4 |
POLYPROPYLENE (PP) HOMOPOLYMER, 40% MINERAL MIX FILLED HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D954-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 30% MINERAL FILLED, COLOR PIGMENTED, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D379-A |
NYLON (TYPE 6/6), MODIFIED - HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D189-A2 |
WEATHERSTRIP, EXPANDED EPDM, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D402-A3 |
POLYURETHANE (PUR) FOAM, HIGH RESILIENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D419-A |
CELLULAR ELASTOMER, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D725-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 30% GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD ESA-M4D200-B |
POLYURETHANE (PUR) FOAM, FLEXIBLE, RESTRICTED FLOW |
|
FORD ESA-M4D281-A |
POLYPROPYLENE, GENERAL PURPOSE - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-USE ESB-M4D308-A |
|
FORD ESE-M4D287-B |
NYLON (TYPE 66), 33% GLASS FIBER REINFORCED - HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D732-A3 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D924-A |
POLYCARBONATE + ACRYLONITRILE/BUTADIENE/STYRENE BLEND (PC+ABS), HIGH LOW TEMPERATURE IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D556-A |
POLYPROPYLENE COPOLYMER, 22 % MINERAL FILLED, INTERIOR |
|
FORD WSK-M4D729-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, MELT FLOW RATE 1.5 - 4.0 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D761-A |
POLYCARBONATE (PC) MEDIUM MELT FLOW RATE MOLDING COMPOUND, INTERIOR |
|
FORD WSS-M4D666-A2 |
POLYAMIDE 66 (PA66), IMPACT MODIFIED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D941-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND, LUBRICATED AND HEAT STABILIZED WITH 25% MINIMUM RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D961-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 12% MINERAL, HIGH MELT FLOW, LOW CLTE, FULLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D841-A |
POLYPROPYLENE (PP) COPOLYMER, 15 % MINERAL FILLED, COLOR PIGMENTED, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D660-A |
POLYPROPYLENE (PP) COPOLYMER, COLOR PIGMENTED INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSK-M4D822-A |
POLYAMIDE 6 (PA6), HEAT STABILIZED, 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D827-A2 |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT HIGH IMPACT, LOW GLOSS, INTERIOR *** TO BE USED WITH WSS-M99P1111-A *** |
|
FORD WSS-M4D293-B3 |
POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M4D638-B |
|
FORD WSS-M4D706-A3 |
POLYAMIDE 66 (PA66), HEAT STABILIZED, IMPACT MODIFIED, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSS-M4D729-A3 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% TALC FILLED, INJECTION MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D979-A |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND, UNPAINTED AIRBAG COVER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D189-A |
POLYAMIDE (PA) 6 OR 66, 13% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D665-A5 |
|
FORD WSB-M4D923-A |
POLYCARBONATE + ACRYLONITRILE/BUTADIENE/STYRENE BLEND (PC+ABS) MOLDING COMPOUND,INTERIOR ***TO BE USED WITH FORD WSS-M99P111-A*** |
|
FORD WSD-M2D378-A1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 60 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D556-A4 |
POLYPROPYLENE COPOLYMER, 20 % MINERAL FILLED, HIGH SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR-Shown on WSK-M4D556-A |
|
FORD WSK-M4D642-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 30% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD WSS-M4D952-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED, REACTOR GRADE MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2, and WSS-M4D952-A3 |
|
FORD ESA-M4D379-B |
NYLON (TYPE 6/6), MODIFIED - HEAT STABILIZED HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESA-M4D379-A; |
|
FORD ESB-M4D133-A |
NYLON, GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D101-A |
NYLON (TYPE 6), HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D150-A |
NYLON (TYPE 66) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D456-A |
POLYURETHANE (PUR) FOAM, CAST ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D689-A1 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 80 A HARDNESS, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D706-A2 |
POLYAMIDE 66 (PA66), HEAT STABILIZED IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D731-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% GLASS FIBRE REINFORCED, MELT FLOW RATE 1.0 - 3.0 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D752-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, COOLING AGENT RESISTANT, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D827-A3 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND |
|
FORD WSS-M4D911-B |
POLYPROPYLENE (PP) COPOLYMER, HIGH IMPACT 100 % RECYCLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D300-A |
ABS MOLDING COMPOUND, HIGH IMPACT - HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D373-A |
ABS, HIGH TEMPERATURE, MOLDING COMPOUND |
|
FORD WSA-M4D768-A |
PPOLYAMIDE (PA) 66, HEAT STABILIZED, 33% GLASS FIBER REINFORCED, TRANSLUCENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D841-A3 |
POLYPROPYLENE (PP) COPOLYMER, 13% TALC FILLED COLOR PIGMENTED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A1 |
HOSE, EPDM RUBBER, PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO- CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D591-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, HEAT STABILIZED, 14% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D712-A1 |
THERMOPLASTIC ELASTOMER (TPE), POLYOLEFIN, EPDM RUBBER MODIFIED, 50 DUROMETER D HARDNESS***TO BE USED WITH FORD WSS-M99P1111-a***-Use WSS-M2D382-B1 |
|
FORD WSK-M4D732-A2 |
POLYPROPYLENE (PP) homopolymer, 30% GLASS FIBRE REINFORCED, MELT FLOW RATE 10 - 18 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D993-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D891-A1 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M99D57-B |
POLYURETHANE (PUR) FOAM, PRESSURE SENSITIVE ADHESIVE, LOW PERMEABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D651-A2 |
POLYPROPYLENE (PP) COPOLYMER, 10 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D684-A2 |
ABS/PC BLEND, MEDIUM IMPACT STRENGTH MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D719-A |
POLYAMIDE (PA) 66, 38% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D823-A |
|
FORD WSK-M4D729-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, MELT FLOW RATE 12 - 22 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D776-A2 |
ACRYLIC (PMMA), HEAT RESISTANT, OPTICAL GRADE MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D938-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D34-A |
THERMOPLASTIC POLYURETHANE (TPU) FORMED INSTRUMENT PANEL ASSEMBLY *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD ESA-M4D134-A |
POLYPROPYLENE (PP), MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M4D638-B |
|
FORD ESA-M4D166-A |
POLYPROPYLENE, TALC FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D354-A1 |
POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D9-A |
ACRYLIC RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M96D36-A1 |
HOSE, HIGH PRESSURE, HIGH TEMPERATURE RESISTANT, POWER STEERING-REPLACES ESL-M2D281-A |
|
FORD WSB-M4D734-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MOLDING COMPOUND, PAINTED APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D908-A |
ACRYLONITRILE BUTADIENE STYRENE (ABS), POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D22-B |
POLYVINYL CHLORIDE (PVC), DRY BLEND SLUSH/POLYURETHANE (PUR) FOAM, FORMED INSTRUMENT PANEL ASSEMBLY **TO BE USED WITH FORD WSS-M99P1111-A**-Use WSS-M15P45-A |
|
FORD WSD-M2D243-A4 |
POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D670-A |
POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D823-A |
POLYAMIDE 66 (PA66), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D873-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 10% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D644-A3 |
POLYPROPYLENE (PP) HOMOPOLYMER, HEAT STABILIZED, 40% MINERAL FILLED, CONTROLLED RHEOLOGY, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D980-A |
FLEXIBLE COVERSTOCK, EXTRUDED THERMOPLASTIC POLYOLEFIN (TPO), INSTRUMENT PANEL *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M96D45-B |
HOSE, LOW PRESSURE, POWER STEERING RETURN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D246-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE HIGH MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D246-A1 |
|
FORD ESB-M2D304-A |
POLYURETHANE FOA | |
|