| |
FORD - Plastics/Elastomers (VOLS. 5, 6, 7) Collection
Listing of active documents part of the FORD - Plastics/Elastomers (VOLS. 5, 6, 7) Collection.
|
FORD WSS-M4D989-B |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) CONDUCTIVE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D122-A |
HOSE, LOW PRESSURE - POWER STEERING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D197-A |
POLYETHYLENE, COPOLYMER - MOLDING COMPOUND |
|
FORD ESA-M4D359-A1 |
POLYBUTYLENE TEREPHTHALATE (PBT) INJECTION MOLDING COMPOUND - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M96D4-A |
HOSE, HYDRAULIC BRAKE ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M96D4-B |
|
FORD ESA-M96D4-A2 |
HOSE, HYDRAULIC BRAKE ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D148-A |
POLYVINYL CHLORIDE (PVC) COPOLYMER, HOT DIP PLASTISOL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D233-A |
POLYVINYL CHLORIDE (PVC) COPOLYMER SPONGE, MODIFIED SHEET STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M99P32-A |
|
FORD ESB-M4D233-C |
POLYVINYL CHLORIDE COPOLYMER FOAM, HIGH DENSITY ***TO BE USED WITH FORD M99P1111-A*** |
|
FORD ESB-M4D263-C1 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - HIGH HEAT - ELECTRICAL GRADE SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D357-A |
ACETAL COPOLYMER, GLASS FILLED - GLASS TO COPOLYMER - CHEMICALLY COUPLED |
|
FORD ESB-M4D464-A2 |
ACETAL HOMOPOLYMER, MODIFIED - HIGH IMPACT GRADE - PIGMENTED |
|
FORD ESB-M4D492-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), MINERAL/GLASS ESB-M4D492-A2 FIBER FILLER, COLOR PIGMENTED, PAINTED APPLICATIONS ONLY***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D492-A1; Use WSS-M4D492-B2 |
|
FORD ESB-M99D56-A2 |
TUBING, POLYOLEFIN, HEAT SHRINKABLE, DUAL WALL, ADHESIVELY LINED, SEMI-RIGID, FLAME RETARDED***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M99D56-A1 |
|
FORD ESL-M4D533-A |
NYLON (PA) 6/66 COPOLYMER, 33% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD ESW-M2D247-A |
NITRILE BUTADIENE RUBBER, HIGH HEAT RESISTANT - OIL SEALS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9883-A |
RUBBER WEATHERSTRIP, FLOCKED***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9883-B |
RUBBER WEATHERSTRIP, FLOCKED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on SK-M99D9883-A |
|
FORD S-M99D4580-A |
SINGLE OR MULTIPLE PLUG***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D658-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED, 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D821-A |
ACETAL (POM) COPOLYMER, 25 % GLASS BEAD FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D866-A1 |
ABS + POLYCARBONATE (ABS +PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D880-A |
POLYETHYLENE (PE), LINEAR LOW DENSITY MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D31-A2 |
LAMINATE, POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) OR POLYVINYL CHLORIDE (PVC) SKIN/POLYOLEFIN FOAM/POLYOLEFIN (PP) SKIN, LOW PRESSURE MOLDING - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D376-A |
ETHYLENE/PROPYLENE RUBBER (EPDM), ENGINE COOLANT AND COMPRESSION STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D378-A2 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 60 DUROMETER A HARDNESS, INTERIOR |
|
FORD WSE-M2D399-A3 |
SILICONE RUBBER (VMQ), MEDIUM HARDNESS, HIGH TEMPERATURE, LOW VOLATILE SILICONE, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D718-A3 |
POLYCARBONATE (PC) FILM, CLEAR AND TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSG-M4D807-A3 |
POLYPHENYLENE SULFIDE (PPS), 43 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 27% MINERAL FILLED - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 26% MINERAL FILLED, MEDIUM HIGH IMPACT INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D621-A |
POLYVINYL CHLORIDE (PVC), DRY BLEND SLUSH, MOULDED SKIN |
|
FORD WSK-M4D642-A3 |
POLYAMIDE (PA) 66, HEAT STABILIZED, 30% GLASS FIBER REINFORCED, REDUCED MOISTURE ABSORPTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD WSK-M4D648-A3 |
POLYAMIDE 66 (PA66), HEAT STABILIZED MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D689-A3 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 90 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D692-A2 |
THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, HEAT STABILIZED EXTRUSION MOLDING COMPOUND-Shown on WSK-M4D692-A1 |
|
FORD WSK-M4D698-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 33 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B2 |
|
FORD WSK-M4D765-A |
POLYPROPYLENE (PP) COPOLYMER, HIGH MELT RATE FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSK-M4D777-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH IMPACT, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2 |
|
FORD WSK-M4D777-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2 |
|
FORD WSK-M4D777-A6 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2, and WSS-M4D952-A3 |
|
FORD WSK-M4D796-A2 |
POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D800-A |
POLYETHYLENE (PE), HIGH DENSITY, HIGH MELT FLOW RATE, LOW IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D807-A2 |
POLYPHENYLENE SULFIDE (PPS), 40 % GLASS FIBER REINFORCED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D829-A |
POLYAMIDE 12 (PA12), HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D844-A9 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), IMPACT RESISTANT MOLDING COMPOUND |
|
FORD WSL-M4D807-A |
POLYPHENYLENE SULFIDE (PPS), 40% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D401-A9 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D550-A8 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, PAINTABLE OR MOLDED-IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D631-A2 |
ABS MOLDING COMPOUND, HIGH COLD IMPACT INTERIOR |
|
FORD WSS-M4D713-A6 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 9 % GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D744-A4 |
ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.5 - 3.5, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D744-A2 |
|
FORD WSS-M4D804-A2 |
POLYAMIDE 6 (PA6), HEAT STABILIZED BLOW MOLDING GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D871-A5 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED **TO BE USED WITH FORD M99P1111-A*** |
|
FORD WSS-M4D961-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D985-A |
FLEXIBLE COVERSTOCK, SLUSH MOLDABLE POLYVINYL CHLORIDE (PVC), INSTRUMENT PANEL ***TO BE USED WITH FORD WSS-M99P1111-A***-(USE WSS-M4D985-A2) |
|
FORD ESA-M99D56-A3 |
TUBING, POLYOLEFIN, HEAT SHRINKABLE, DUAL WALL, ADHESIVE LINED, SEMI- RIGID***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D221-A |
POLYURETHANE FOAM, HIGH RESILIENCE - 38 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A3 |
POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D113-C |
POLYURETHANE FOAM, FLEXIBLE SLAB AND MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD ESB-M4D24-A |
ABS COPOLYMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D570-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) ESB-M4D570-A1 INJECTION MOLDING GRADE - EXTERIOR - UV STABILIZED***TO BE USED WITH FOED WSS-M99P1111-A***-Use WSS-M4D952-A2 |
|
FORD ESB-M4D605-A |
POLYPROPYLENE (PP), IMPACT MODIFIED, HEAT STABILIZED, 10% CALCIUM CARBONATE FILLED |
|
FORD ESB-M4D606-A |
POLYPROPYLENE (PP) HOMOPOLYMER, 13% TALC FILLED MOLDING COMPOUND |
|
FORD ESB-M4D75-A |
POLYURETHANE FOAM, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D43-A |
POLYPROPYLENE, 50% WOOD FIBER FILLED - EXTRUDED COMPOSITE***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D110-A |
MYLAR, TRANSFER FILM - HOT STAMPING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D305-A |
NYLON (TYPE 6) MOLDING COMPOUND, NUCLEATED HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D423-A |
NYLON (TYPE 6) COPOLYMER, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D672-A |
|
FORD ESF-M4D9-A10 |
ACRYLIC (PMMA), MEDIUM HEAT DEFLECTION TEMPERATURE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D230-A2 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESW-M2D230-A1 |
|
FORD SD-M99D9104-A |
MAT - THERMOPLASTIC RUBBER, SOUND DEADENING - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SJ-M99D9720-A |
INSULATING TUBE, HEAT RESISTANT***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SL-M4D9575-B |
POLYETHYLENE, HIGH DENSITY - LOW MFI |
|
FORD S-M4D4765-A |
POLYTETRAFLUOROETHYLENE - ***TO BE USED WITH FORD WSS-M99P111-A*** |
|
FORD WSA-M4D688-A3 |
ABS + POLYCARBONATE BLEND (ABS+PC), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSA-M4D688-A1 |
|
FORD WSB-M2D467-A |
THERMOPLASTIC POLYOLEFIN (TPO) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D619-A1 |
POLYPROPYLENE (PP) SHEET, 30% CONTINUOUS GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D724-A4 |
STYRENE/MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED MOLDING COMPOUND, 20% GLASS FIBER REINFORCED BLEND WITH 10% MAXIMUM PMMA REGRIND AND 20% MAXIMUM RECLAIM AND/OR REGRIND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D840-A4 |
ACETAL (POM) COPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.8 - 4.0, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D875-A |
POLYPROPYLENE COPOLYMER (PP), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSB-M4D883-A1 |
ACETAL (POM) COPOLYMER, 20% GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSB-M4D891-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA), HIGH MELT FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D27-A |
POLYVINYL CHLORIDE (PVC), DRY BLEND SLUSH/RIGID SUBSTRATE, FORMED TRIM ASSEMBLY, INTERIOR **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSD-M2D379-A2 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 69 DUROMETER A HARDNESS, INTERIOR-Shown on WSD-M2D378-A2 |
|
FORD WSD-M2D380-A2 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 75 DUROMETER A HARDNESS, INTERIOR-Shown on WSD-M2D378-A2 |
|
FORD WSD-M2D405-A1 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 60 IRHD *** TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A3 |
HOSE, EPDM RUBBER, RAYON OR PET FIBER REINFORCED, ENGINE COOLANT AND ELECTROCHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS, OR A COPOLYMER PARA-ARAMID ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M96D34-A1 |
|
FORD WSF-M4D618-A |
ACETAL (POM) COPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M2D410-A |
POLYURETHANE (PUR) FOAM, BACTERIA/FUNGUS RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M96D25-A2 |
HOSE, AIR CONDITIONING REFRIGERANT (NYLON BARRIER) RESISTANT, MEDIUM PRESSURE |
|
FORD WSK-M4D595-A |
POLYAMIDE (PA) 6, 40% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D674-A |
|
FORD WSK-M4D596-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 50% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D608-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 33% GLASS FIBER REINFORCED IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D630-A |
ABS MOLDING COMPOUND, HIGH IMPACT INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D685-A |
ABS + POLYCARBONATE BLEND (ABS+PC), MEDIUM IMPACT STRENGTH MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D689-A4 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 95 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D689-A5 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 75 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D718-A2 |
POLYCARBONATE (PC) FILM, TRANSLUCENT, GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D744-A |
ACETAL (POM) HOMOPOLYMER, UV STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D755-A1 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 55 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D760-A |
POLYPROPYLENE (PP) COPOLYMER, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D777-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A3 |
|
FORD WSK-M4D793-A |
ACETAL (POM) COpoPOLYMER, 26% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D798-A |
POLYETHYLENE (PE), LOW DENSITY, FLEXIBLE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D806-A |
ABS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D855-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20 % MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSK-M4D876-A1 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M98D25-A2 |
MODIFIED POLYPROPYLENE (PP), EPDM MODIFIED SHEET 25% WOOD FLOUR FILLED, VIRGIN AND/OR RECYCLED POLYMER MATRIX **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSS-M4D550-A9 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TE0) 22% MINERAL FILLED MEDIUM IMPACT MOLDING COMPOUND, MOLDED-IN-COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D664-A3 |
POLYMIDE (PA) 6, HEAT STABILIZED 33% GLASS FIBER REINFORCED, MINIMUM 25% PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D968-A |
|
FORD WSS-M4D665-A3 |
POLYAMIDE 6 (PA6), 15% GLASS FIBER REINFORCED POST INDUSTRIAL RECYCLATE (PIR) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D841-A6 |
POLYPROPYLENE (PP) COPOLYMER, 13 % TALC REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D931-A1 |
POLYETHYLENE, HIGH DENSITY (PE-HD), 25 % MICA FILLED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D264-B |
POLYURETHANE (PUR) FOAM,, LOW DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESA-M2D264-A |
|
FORD ESA-M99D52-A |
POLYETHYLENE FILM, LOW DENSITY - STRETCH***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A4 |
POLYURETHANE (PUR) MICROCELLULAR ELASTOMER, REACTION INJECTION MOLDED (RIM), PAINTABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D311-A |
POLYETHYLENE, HIGH DENSITY - EXTRUSION GRADE - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D330-A1 |
IONOMER (ETHYLENE) MOLDING COMPOUND, CLEAR |
|
FORD ESB-M4D385-A |
ABS SHEET, EXTRUSION GRADE - VACUUM FORMABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D17-A |
RUBBER HEEL PADS - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D56-A1 |
TUBING, POLYOLEFIN, HEAT SHRINKABLE, DUAL WALL, ADHESIVELY LINED - SEMI-RIGID***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M99D54-A |
ELASTOMERIC FLOOR MAT***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D224-A |
POLYURETHANE FOAM, OPEN CELL - RETICULATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D355-B |
POLYPROPYLENE (PP), 42 % TALC AND TI02 FILLED, HEAT STABILIZED, MOLDING COMPOUND |
|
FORD ESF-M4D405-C1 |
POLYETHYLENE TEREPHTHALATE (PET), 30 % GLASS REINFORCED MOLDING COMPOUND |
|
FORD ESH-M4D166-C |
POLYPROPYLENE, TALC FILLED-, HEAT STABILIZED, INJECTION MOLDING COMPOUND |
|
FORD ESL-M4D359-A3 |
THERMOPLASTIC POLYESTER, NON-REINFORCED PBT - HIGH IMPACT MODIFIED |
|
FORD ESL-M4D414-A |
POLYETHYLENE, HIGH DENSITY INJECTION MOLDING COMPOUND |
|
FORD SJ-M4D9792-A |
ABS MOULDING COMPOUND, VERY HIGH HEAT RESISTANT |
|
FORD SK-M98D9736-B |
POLYURTETHANE FOAM WITH INTEGRAL SKIN - ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD SK-M98D9736-A |
|
FORD S-M4D4900-A |
COMPONENT B (POLYISOCYANATE) FOR PUR-FOAM - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M2D401-A5 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M2D401-A6 |
FLUOROSILICONE (FVMQ), OXYGENATED/OXIDIZED FUEL RESISTANT, LOW TEMPERATURE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M2D401-A8 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D280-A5 |
SILICONE ELASTOMER (VMQ), INHERENTLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D280-A7 |
SILICONE ELASTOMER (VMQ), NONLUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D452-A |
THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D627-A |
POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-REPLACES SL-M4D9656-A |
|
FORD WSB-M4D658-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED, 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D812-A |
POLYPROPYLENE (PP) COPOLYMER MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4d812-A |
|
FORD WSB-M4D816-A2 |
POLYCARBONATE + ABS BLEND (PC+ABS), MEDIUM IMPACT, HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D844-A10 |
POLYPHENYLENE ETHER + POLYSTYRENE (PPE+PS), BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSB-M4D844-A10*** |
|
FORD WSB-M4D860-A |
ACETAL (POM) COPOLYMER, 25 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D871-A4 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 85 A DUROMETER HARDNESS, INTERIOR **TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D871-A1 |
|
FORD WSB-M4D875-A2 |
POLYPROPYLENE COPOLYMER (PP), IMPACT MODIFIED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSB-M4D928-A1 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED MOLDING COMPOUND, RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D31-A1 |
LAMINATE, POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) OR POLYVINYL CHLORIDE (PVC) SKIN/POLYPROPYLENE (PP) FOAM, LOW PRESSURE MOLDING **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSD-M2D243-A2 |
POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D243-A5 |
POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D243-A4 |
|
FORD WSD-M2D378-A6 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 66 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D401-A |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT, COMPRESSION STRESS RELAXATION RESISTANT, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D404-A1 |
POLYURETHANE ELASTOMER (PUR) REACTION INJECTION MOLDED (RIM), GLASS ENCAPSULATION, 80 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D435-A |
RUBBER, HYDROGENATED NITRILE (HNBR) OXIDIZED AND OXYGENATED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D448-A |
POLYACRYLIC RUBBER (ACM), HOT AIR, HOT OIL AND COMPRESSION STRESS RELAXATION RESISTANT, 50 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D40-A1 |
TUBE, EPDM RUBBER, ENGINE COOLANT, LOW COMPRESSION SET **TO BE USED WITHFORD WSS-M99P1111-A** |
|
FORD WSE-M2D392-A |
FLUOROELASTOMER (FKM), OIL SEAL VALVE STEM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D412-A |
SILICONE (VMQ) RUBBER, 70 IRHD HARDNESS, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D418-A |
SILICONE (VMQ) RUBBER, HIGH TEMPERATUE RESISTANT, LONG LIFE GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A2 |
HOSE, EPDM RUBBER, META-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO- CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M96D34-A1 |
|
FORD WSG-M4D901-A1 |
POLYETHYLENE, HIGH DENSITY (PE-HD) BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M2D463-A |
HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) REFRIGERANT AND OIL RESISTANT O-RINGS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D415-A |
POLYURETHANE (PUR) FOAM, MOLDED, SEMI RIGID ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A6 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 25% MINERAL FILLED, MEDIUM HIGH IMPACT, HIGH SCRATCH RESISTANT MOLDING COMPOUND, MULTI SPOT DECOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D550-A |
|
FORD WSK-M4D633-A |
POLYETHYLENE (PE) EXPANDED SHEET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D637-A4 |
ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 34-44 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D637-A1 |
|
FORD WSK-M4D667-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 40% MINERAL FILLED |
|
FORD WSK-M4D671-A |
POLYAMIDE (PA) 46, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D676-A7 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 80 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D681-A2 |
ACETAL (POM) HOMOPOLYMER, IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D689-A7 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 60 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D693-A1 |
THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, INJECTION MOLDING COMPOUND-REPLACES SK-M4D9975-A |
|
FORD WSK-M4D701-A |
POLYAMIDE (PA) 12, FLEXIBLE, HEAT STABILIZED, MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D704-A3 |
POLYAMIDE (PA) 66, HEAT STABILIZED 40% MINERAL FILLED, REDUCED MOISTURE ABSORPTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D704-A1 |
|
FORD WSK-M4D708-A |
POLYAMIDE (PA) 6, 30% GLASS FIBER/GLASS SPHERE REINFORCED |
|
FORD WSK-M4D710-A |
ABS MOLDING COMPOUND, VERY HIGH HEAT RESISTANT AND HIGH TENSILE STRENGTH |
|
FORD WSK-M4D718-A4 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE (PC+PBT) BLEND FILM, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D721-A |
POLYETHYLENE (PE) MOLDING COMPOUND, HIGH DENSITY, MEDIUM MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D726-A1 |
POLYETHYLENE TEREPHTHALATE (PET), 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D727-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D744-A2 |
ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 11 - 17, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D751-A |
POLYETHYLENE (PE) FOAM, CROSSLINKED CLOSED CELL, 50 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D777-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D788-A1 |
POLYPROPYLENE (PP) COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D791-A2 |
ABS + POLYCARBONATE (ABS+PC) BLEND, MEDIUM HEAT RESISTANT, IMPROVED LOW TEMPERATURE IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D794-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, IMPACT MODIFIED, BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D796-A1 |
POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND |
|
FORD WSK-M4D799-A |
POLYETHYLENE (PE), MEDIUM DENSITY, LOW MELT FLOW RATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D805-A |
POLYVINYL CHLORIDE (PVC) FOAM, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D819-A2 |
POLYETHYLENE (PE) FOAM, PHYSICALLY CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D839-A |
ACETAL (POM) COPOLYMER, ELASTOMER MODIFIED MOLDING COMPOUND, EXTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D843-A2 |
POLYPHTHALAMIDE (PPA), IMPACT MODIFIED, 34% GLASS FIBER REINFORCED MOLDING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D844-A7 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), HIGH HEAT MOLDING COMPOUND |
|
FORD WSK-M4D849-A |
POLYAMIDE 6 (PA6), 30 % MINERAL REINFORCED MOLDING COMPOUND-REPLACES SK-M4D9695-A |
|
FORD WSK-M4D855-A |
POLYPROPYLENE (PP) HOMOPOLYMER, 20 % MINERAL/GLASS FIBER FILLED/REINFORCED MOLDING COMPOUND |
|
FORD WSK-M4D896-A1 |
POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA), 30 % GLASS FIBER REINFORCED MOLDING COMPOUND, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M96D33-A4 |
HOSE, NON-REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M96D37-A |
HOSE, POLYTETRAFLUOROETHYLENE (PTFE), CONTINUOUS FILAMENT GLASS BRAID REINFORCED, FUEL RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D496-A5 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D500-A1 |
POLYURETHANE FOAM, CLOSED CELL, STANDARD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D507-A2 |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 60 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D507-A |
|
FORD WSS-M2D507-A6 |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 25 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D642-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D796-A3 |
POLYCARBONATE (PC), MODIFIED, HIGH FLOW AND HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D822-A3 |
POLYAMIDE 6 (PA6), HEAT STABILIZED 20% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D827-A4 |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT MEDIUM IMPACT SUPER HIGH FLOW MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSS-M4D929-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D982-A |
POLYPROPYLENE (PP), 40% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D984-A |
FLEXIBLE COVERSTOCK, EXPANDABLE POLYVINYL CHLORIDE (PVC), INSTRUMENT PANEL *** TO BE USED WITH FORD WSS-M99P1111-A ***-Use WSS-M2F206-A1/A2 |
|
FORD WSS-M4D998-A1 |
RUBBER MODIFIED POLYVINYL CHLORIDE (PVC), ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D25-A3 |
HOSE, AIR CONDITIONING REFRIGERANT (NYLON 6 BARRIER) RESISTANT, MEDIUM PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M99D65-A1 |
THERMOPLASTIC POLYOLEFIN, LOW TEMPERATURE, FLEXIBLE, AUXILIARY FLOOR MAT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D264-A |
POLYURETHANE (PUR) FOAM, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D187-A |
THERMOPLASTIC POLYURETHANE (TPUR) MOLDING COMPOUND |
|
FORD ESA-M4D292-A |
TUBING, POLYVINYL CHLORIDE - VACUUM LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D369-A |
POLYETHYLENE, ULTRA HIGH MOLECULAR WEIGHT |
|
FORD ESA-M4D371-A |
POLYPROPYLENE MOLDING COMPOUND ULTRAVIOLET STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD ESA-M4D375-A |
POLYTETRAFLUOROETHYLENE - 10% GRAPHITE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D568-A |
THERMOPLASTIC POLYURETHANE (TPU) MOLDING COMPOUND, 40% LONG GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D246-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE INTERMEDIATE MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D246-A1 |
|
FORD ESB-M2D280-A2 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED - POLYCARBONATE COMPATIBLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D356-B |
POLYURETHANE (PUR) FOAM, RIGID, 37 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D100-A3 |
POLYCARBONATE (PC), OPTICAL GRADE - UNCOATED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESF-M4D100-A1 |
|
FORD ESB-M4D157-A |
POLYETHYLENE (PE), SHEET - CLEAR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D156-A |
|
FORD ESB-M4D284-C1 |
POLYVINYL CHLORIDE, EXTRUSION AND MOLDING GRADE - EXTERIOR - SOIL RESISTANT, (FORMERLY TYPE I) |
|
FORD ESB-M4D284-C4 |
POLYVINYL CHLORIDE, EXTRUSION AND MOLDING GRADE - EXTERIOR - SOIL RESISTANT, (FORMERLY TYPE IV)-Shown on ESB-M4D284-C1 |
|
FORD ESB-M4D354-A3 |
POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - SELF EXTINGUISHING - NONPAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D385-A2 |
ABS, MOLDING COMPOUND - HIGH IMPACT |
|
FORD ESB-M4D462-A1 |
POLYBUTYLENE TEREPHTHALATE, IMPACT MODIFIED - 10% GLASS FIBER REINFORCED |
|
FORD ESB-M4D492-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), MINERAL FILLER - COLOR PIGMENTED - HIGHER MOLD SHRINKAGE - PAINTED, APPLICATIONS ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B2 |
|
FORD ESB-M4D545-A |
NYLON/POLYPHENYLENE OXIDE ALLOY, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D576-A |
POLYARYLATE (PAR) MOLDING COMPOUND, HIGH HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D17-C |
RUBBER AUXILIARY FLOOR MATS - ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD ESB-M99D17-A |
|
FORD ESB-M99D55-A1 |
TUBING, POLYOLEFIN - HEAT SHRINKABLE - DUAL***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M99D57-A |
POLYURETHANE FOAM, PRESSURE SENSITIVE ADHESIVE, LOW PERMEABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D236-A |
SILICONE RUBBER, SEAL, OIL PAN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D364-A3 |
SILICONE RUBBER, HIGH ELONGATION, LOW VOLATILE - LONG LIFE GASKET, OIL PAN AND ROCKER ARM COVER ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESE-M2D364-A |
|
FORD ESE-M4D341-A1 |
POLYESTER, THERMOPLASTIC - 30% GLASS REINFORCED |
|
FORD ESF-M4D135-B |
POLYPROPYLENE EXTRUSION COMPOUND, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESF-M4D135-A; USE ESB-M4D308-A |
|
FORD ESF-M4D155-A |
POLYURETHANE FOAM, OPEN FINE CELL ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD ESF-M4D216-A |
NYLON (TYPE 612), MOLDING COMPOUND, HEAT RESISTANT |
|
FORD ESF-M4D255-A |
ABS MOLDING COMPOUND - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D335-A |
NYLON (TYPE 66), 43% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D341-C |
POLYESTER, THERMOPLASTIC (PBT), 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D291-C |
POLYURETHANE FOAM, RESTRICTED FLOW – FLEXIBLE FORMED IN PLACE - WITH ADHESIVE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D291-E |
POLYURETHANE FOAM, RESTRICTED FLOW - FLEXIBLE DIE CUT - WITH ADHESIVE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESH-M4D291-C |
|
FORD ESH-M4D380-A |
POLYURETHANE FOAM, LOW DENSITY SKINNED - FOAM IN PLACE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D192-A2 |
HOSE, EPDM RUBBER - RAYON OR POLYESTER REINFORCED, ENGINE COOLANT RESISTANT LOW COMPRESSION SET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESP-M2D294-A1 |
FLUOROELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D100-A |
OIL SEAL, NITRILE BUTADIENE RUBBER - AUTOMOTIVE TRANSMISSION - HIGH TEMPERATURE SERVICE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D230-A3 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESW-M2D230-A1 |
|
FORD ESW-M99D18-A |
FELT, SYNTHETIC FIBER FOR FILTERING ESW-M99D18-A AUTOMATIC TRANSMISSION FLUID***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SA-M4D9961-A |
POLYURETHANE ELASTOMER, SHORE HARDNESS D 60 - ***TO BE USED WITH FORD WSS-M99P1111*** |
|
FORD SK-M3D9601-B |
HOT STAMPING FILM, COLORED INTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M4D9940-A |
THERMOPLASTIC POLYOLEFINE ELASTOMER, SEMI RIGID |
|
FORD SK-M98D9502-A |
PVC HOSE, REINFORCED |
|
FORD SK-M98D9600-A |
POLYPROPYLENE SHEET, 40% WOOD FLOUR FILLED***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9565-B |
PLASTIC PART INTERIOR, HOT STAMPED |
|
FORD SK-M99D9696-A |
PU MOLDED PARTS, COLORED, WITH INTEGRAL SKIN, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9709-A |
PLASTIC COATED SPRING WIRE***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4622-A |
RUBBER MAT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4705-A |
POLYAMIDE COATED METAL ***TO BE USED WITH FORD WSS-M99P111-A*** |
|
FORD SS-M98D9530-A |
FUEL LINE PA 11/12 |
|
FORD WSB-M4D636-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D650-A |
THERMOPLASTIC POLYURETHANE/POLYCARBONATE (TPU+PC) BLEND MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D677-A |
POLYAMIDE (PA) 66, 30% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D683-A |
THERMOPLASTIC ETHER ESTER ELASTOMER (TEEE) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D735-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D738-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 30% MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D815-A3 |
POLYPROPYLENE (PP) FOAM, CLOSED CELL, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D815-A1 |
|
FORD WSB-M4D818-A2 |
POLYPROPYLENE (PP) SHEET, 40% LONG GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D834-A |
POLYPROPYLENE (PP), 15% GLASS SPHERE REINFORCED HEAT STABILIZED MOLDING COMPOUND ** TO BE USED WITH WSS-M99P1111-A ** |
|
FORD WSB-M4D844-A8 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPOUND |
|
FORD WSB-M4D854-A1 |
POLYPROPYLENE (PP), 30 % GLASS FIBER REINFORCED REMANUFACTURED MOLDING COMPOUND |
|
FORD WSB-M4D871-A3 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 75 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D871-A1 |
|
FORD WSB-M4D889-A1 |
POLYVINYL CHLORIDE (PVC), RIGID, 65 D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D898-A |
POLYPROPYLENE (PP) COPOLYMER, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A |
|
FORD WSB-M4D912-A |
ACETAL (POM) HOMOPOLYMER, 15 % PTFE AND SILICONE LUBRICATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D919-A |
POLYPROPYLENE (PP) COPOLYMER, IMPACT MODIFIED, 30 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D922-A |
POLYCARBONATE (PC), 10% GLASS FIBER REINFORCED, POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D925-A |
STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA), RUBBER MODIFIED, 42 % LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D926-A |
POLYCARBONATE (PC), POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D379-A4 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 68 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D14-A3 |
HOSE, EPDM RUBBER - RAYON OR POLYESTER REINFORCED, ENGINE COOLANT RESISTANT LOW COMPRESSION SET ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A3 |
WEATHERSTRIP/WINDLACE CO-EXTRUSTION, ETHYLENE-PROPYLENE (EPDM) FOAM/ETHYLENE-PROPYLENE RUBBER (EPDM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D27-A |
TUBE, CHLOROSULPHONATED POLYETHYLENE (CSM) RUBBER, MODERATE OIL RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D401-A2 |
FLUOROELASTOMER (FKM), OXIDIZED FUEL RESISTANT, COMPRESSION STRESS RELAXATION RESISTANT, LOW TEMPERATURE RESISTANT, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D401-A |
|
FORD WSE-M2D470-A2 |
DUCT, CPE, CHLORINATED POLYETHYLENE, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M2D470-A1 |
|
FORD WSF-M2D415-A2 |
POLYURETHANE (PUR) FOAM, OPEN CELL IMPACT/ENERGY ABSORBING, MEDIUM DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D779-A |
POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND, 100% RECYCLED PET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D396-A |
POLYURETHANE (PUR) FOAM, SEMI RIGID ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D417-A |
POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D556-A5 |
POLYPROPYLENE COPOLYMER, 24 % MINERAL FILLED, HIGH SCRATCH RESISTANT MOLDING COMPOUND, MULTI SPOT DECOR, INTERIOR-Shown on WSK-M4D556-A |
|
FORD WSK-M4D598-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D636-A |
POLYBUTYLENE TEREPHTHALATE (PBT) INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D637-A3 |
ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 19-32 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D637-A1 |
|
FORD WSK-M4D668-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 43% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D596-A |
|
FORD WSK-M4D670-A4 |
POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT, COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D676-A1 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 50 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D681-A |
ACETAL (POM) HOMOPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D989-B |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) CONDUCTIVE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D122-A |
HOSE, LOW PRESSURE - POWER STEERING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D197-A |
POLYETHYLENE, COPOLYMER - MOLDING COMPOUND |
|
FORD ESA-M4D359-A1 |
POLYBUTYLENE TEREPHTHALATE (PBT) INJECTION MOLDING COMPOUND - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M96D4-A |
HOSE, HYDRAULIC BRAKE ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M96D4-B |
|
FORD ESA-M96D4-A2 |
HOSE, HYDRAULIC BRAKE ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D148-A |
POLYVINYL CHLORIDE (PVC) COPOLYMER, HOT DIP PLASTISOL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D233-A |
POLYVINYL CHLORIDE (PVC) COPOLYMER SPONGE, MODIFIED SHEET STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M99P32-A |
|
FORD ESB-M4D233-C |
POLYVINYL CHLORIDE COPOLYMER FOAM, HIGH DENSITY ***TO BE USED WITH FORD M99P1111-A*** |
|
FORD ESB-M4D263-C1 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - HIGH HEAT - ELECTRICAL GRADE SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D357-A |
ACETAL COPOLYMER, GLASS FILLED - GLASS TO COPOLYMER - CHEMICALLY COUPLED |
|
FORD ESB-M4D464-A2 |
ACETAL HOMOPOLYMER, MODIFIED - HIGH IMPACT GRADE - PIGMENTED |
|
FORD ESB-M4D492-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), MINERAL/GLASS ESB-M4D492-A2 FIBER FILLER, COLOR PIGMENTED, PAINTED APPLICATIONS ONLY***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D492-A1; Use WSS-M4D492-B2 |
|
FORD ESB-M99D56-A2 |
TUBING, POLYOLEFIN, HEAT SHRINKABLE, DUAL WALL, ADHESIVELY LINED, SEMI-RIGID, FLAME RETARDED***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M99D56-A1 |
|
FORD ESL-M4D533-A |
NYLON (PA) 6/66 COPOLYMER, 33% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD ESW-M2D247-A |
NITRILE BUTADIENE RUBBER, HIGH HEAT RESISTANT - OIL SEALS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9883-A |
RUBBER WEATHERSTRIP, FLOCKED***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9883-B |
RUBBER WEATHERSTRIP, FLOCKED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on SK-M99D9883-A |
|
FORD S-M99D4580-A |
SINGLE OR MULTIPLE PLUG***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D658-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED, 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D821-A |
ACETAL (POM) COPOLYMER, 25 % GLASS BEAD FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D866-A1 |
ABS + POLYCARBONATE (ABS +PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D880-A |
POLYETHYLENE (PE), LINEAR LOW DENSITY MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D31-A2 |
LAMINATE, POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) OR POLYVINYL CHLORIDE (PVC) SKIN/POLYOLEFIN FOAM/POLYOLEFIN (PP) SKIN, LOW PRESSURE MOLDING - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D376-A |
ETHYLENE/PROPYLENE RUBBER (EPDM), ENGINE COOLANT AND COMPRESSION STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D378-A2 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 60 DUROMETER A HARDNESS, INTERIOR |
|
FORD WSE-M2D399-A3 |
SILICONE RUBBER (VMQ), MEDIUM HARDNESS, HIGH TEMPERATURE, LOW VOLATILE SILICONE, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D718-A3 |
POLYCARBONATE (PC) FILM, CLEAR AND TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSG-M4D807-A3 |
POLYPHENYLENE SULFIDE (PPS), 43 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 27% MINERAL FILLED - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 26% MINERAL FILLED, MEDIUM HIGH IMPACT INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D621-A |
POLYVINYL CHLORIDE (PVC), DRY BLEND SLUSH, MOULDED SKIN |
|
FORD WSK-M4D642-A3 |
POLYAMIDE (PA) 66, HEAT STABILIZED, 30% GLASS FIBER REINFORCED, REDUCED MOISTURE ABSORPTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD WSK-M4D648-A3 |
POLYAMIDE 66 (PA66), HEAT STABILIZED MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D689-A3 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 90 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D692-A2 |
THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, HEAT STABILIZED EXTRUSION MOLDING COMPOUND-Shown on WSK-M4D692-A1 |
|
FORD WSK-M4D698-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 33 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B2 |
|
FORD WSK-M4D765-A |
POLYPROPYLENE (PP) COPOLYMER, HIGH MELT RATE FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSK-M4D777-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH IMPACT, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2 |
|
FORD WSK-M4D777-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2 |
|
FORD WSK-M4D777-A6 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2, and WSS-M4D952-A3 |
|
FORD WSK-M4D796-A2 |
POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D800-A |
POLYETHYLENE (PE), HIGH DENSITY, HIGH MELT FLOW RATE, LOW IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D807-A2 |
POLYPHENYLENE SULFIDE (PPS), 40 % GLASS FIBER REINFORCED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D829-A |
POLYAMIDE 12 (PA12), HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D844-A9 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), IMPACT RESISTANT MOLDING COMPOUND |
|
FORD WSL-M4D807-A |
POLYPHENYLENE SULFIDE (PPS), 40% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D401-A9 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D550-A8 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, PAINTABLE OR MOLDED-IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D631-A2 |
ABS MOLDING COMPOUND, HIGH COLD IMPACT INTERIOR |
|
FORD WSS-M4D713-A6 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 9 % GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D744-A4 |
ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.5 - 3.5, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D744-A2 |
|
FORD WSS-M4D804-A2 |
POLYAMIDE 6 (PA6), HEAT STABILIZED BLOW MOLDING GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D871-A5 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED **TO BE USED WITH FORD M99P1111-A*** |
|
FORD WSS-M4D961-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D985-A |
FLEXIBLE COVERSTOCK, SLUSH MOLDABLE POLYVINYL CHLORIDE (PVC), INSTRUMENT PANEL ***TO BE USED WITH FORD WSS-M99P1111-A***-(USE WSS-M4D985-A2) |
|
FORD ESA-M99D56-A3 |
TUBING, POLYOLEFIN, HEAT SHRINKABLE, DUAL WALL, ADHESIVE LINED, SEMI- RIGID***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D221-A |
POLYURETHANE FOAM, HIGH RESILIENCE - 38 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A3 |
POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D113-C |
POLYURETHANE FOAM, FLEXIBLE SLAB AND MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD ESB-M4D24-A |
ABS COPOLYMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D570-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) ESB-M4D570-A1 INJECTION MOLDING GRADE - EXTERIOR - UV STABILIZED***TO BE USED WITH FOED WSS-M99P1111-A***-Use WSS-M4D952-A2 |
|
FORD ESB-M4D605-A |
POLYPROPYLENE (PP), IMPACT MODIFIED, HEAT STABILIZED, 10% CALCIUM CARBONATE FILLED |
|
FORD ESB-M4D606-A |
POLYPROPYLENE (PP) HOMOPOLYMER, 13% TALC FILLED MOLDING COMPOUND |
|
FORD ESB-M4D75-A |
POLYURETHANE FOAM, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D43-A |
POLYPROPYLENE, 50% WOOD FIBER FILLED - EXTRUDED COMPOSITE***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D110-A |
MYLAR, TRANSFER FILM - HOT STAMPING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D305-A |
NYLON (TYPE 6) MOLDING COMPOUND, NUCLEATED HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D423-A |
NYLON (TYPE 6) COPOLYMER, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D672-A |
|
FORD ESF-M4D9-A10 |
ACRYLIC (PMMA), MEDIUM HEAT DEFLECTION TEMPERATURE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D230-A2 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESW-M2D230-A1 |
|
FORD SD-M99D9104-A |
MAT - THERMOPLASTIC RUBBER, SOUND DEADENING - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SJ-M99D9720-A |
INSULATING TUBE, HEAT RESISTANT***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SL-M4D9575-B |
POLYETHYLENE, HIGH DENSITY - LOW MFI |
|
FORD S-M4D4765-A |
POLYTETRAFLUOROETHYLENE - ***TO BE USED WITH FORD WSS-M99P111-A*** |
|
FORD WSA-M4D688-A3 |
ABS + POLYCARBONATE BLEND (ABS+PC), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSA-M4D688-A1 |
|
FORD WSB-M2D467-A |
THERMOPLASTIC POLYOLEFIN (TPO) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D619-A1 |
POLYPROPYLENE (PP) SHEET, 30% CONTINUOUS GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D724-A4 |
STYRENE/MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED MOLDING COMPOUND, 20% GLASS FIBER REINFORCED BLEND WITH 10% MAXIMUM PMMA REGRIND AND 20% MAXIMUM RECLAIM AND/OR REGRIND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D840-A4 |
ACETAL (POM) COPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.8 - 4.0, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D875-A |
POLYPROPYLENE COPOLYMER (PP), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSB-M4D883-A1 |
ACETAL (POM) COPOLYMER, 20% GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSB-M4D891-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA), HIGH MELT FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D27-A |
POLYVINYL CHLORIDE (PVC), DRY BLEND SLUSH/RIGID SUBSTRATE, FORMED TRIM ASSEMBLY, INTERIOR **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSD-M2D379-A2 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 69 DUROMETER A HARDNESS, INTERIOR-Shown on WSD-M2D378-A2 |
|
FORD WSD-M2D380-A2 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 75 DUROMETER A HARDNESS, INTERIOR-Shown on WSD-M2D378-A2 |
|
FORD WSD-M2D405-A1 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 60 IRHD *** TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A3 |
HOSE, EPDM RUBBER, RAYON OR PET FIBER REINFORCED, ENGINE COOLANT AND ELECTROCHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS, OR A COPOLYMER PARA-ARAMID ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M96D34-A1 |
|
FORD WSF-M4D618-A |
ACETAL (POM) COPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M2D410-A |
POLYURETHANE (PUR) FOAM, BACTERIA/FUNGUS RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M96D25-A2 |
HOSE, AIR CONDITIONING REFRIGERANT (NYLON BARRIER) RESISTANT, MEDIUM PRESSURE |
|
FORD WSK-M4D595-A |
POLYAMIDE (PA) 6, 40% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D674-A |
|
FORD WSK-M4D596-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 50% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D608-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 33% GLASS FIBER REINFORCED IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D630-A |
ABS MOLDING COMPOUND, HIGH IMPACT INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D685-A |
ABS + POLYCARBONATE BLEND (ABS+PC), MEDIUM IMPACT STRENGTH MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D689-A4 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 95 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D689-A5 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 75 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D718-A2 |
POLYCARBONATE (PC) FILM, TRANSLUCENT, GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D744-A |
ACETAL (POM) HOMOPOLYMER, UV STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D755-A1 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 55 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D760-A |
POLYPROPYLENE (PP) COPOLYMER, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D777-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A3 |
|
FORD WSK-M4D793-A |
ACETAL (POM) COpoPOLYMER, 26% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D798-A |
POLYETHYLENE (PE), LOW DENSITY, FLEXIBLE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D806-A |
ABS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D855-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20 % MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSK-M4D876-A1 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M98D25-A2 |
MODIFIED POLYPROPYLENE (PP), EPDM MODIFIED SHEET 25% WOOD FLOUR FILLED, VIRGIN AND/OR RECYCLED POLYMER MATRIX **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSS-M4D550-A9 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TE0) 22% MINERAL FILLED MEDIUM IMPACT MOLDING COMPOUND, MOLDED-IN-COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D664-A3 |
POLYMIDE (PA) 6, HEAT STABILIZED 33% GLASS FIBER REINFORCED, MINIMUM 25% PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D968-A |
|
FORD WSS-M4D665-A3 |
POLYAMIDE 6 (PA6), 15% GLASS FIBER REINFORCED POST INDUSTRIAL RECYCLATE (PIR) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D841-A6 |
POLYPROPYLENE (PP) COPOLYMER, 13 % TALC REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D931-A1 |
POLYETHYLENE, HIGH DENSITY (PE-HD), 25 % MICA FILLED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D264-B |
POLYURETHANE (PUR) FOAM,, LOW DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESA-M2D264-A |
|
FORD ESA-M99D52-A |
POLYETHYLENE FILM, LOW DENSITY - STRETCH***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A4 |
POLYURETHANE (PUR) MICROCELLULAR ELASTOMER, REACTION INJECTION MOLDED (RIM), PAINTABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D311-A |
POLYETHYLENE, HIGH DENSITY - EXTRUSION GRADE - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D330-A1 |
IONOMER (ETHYLENE) MOLDING COMPOUND, CLEAR |
|
FORD ESB-M4D385-A |
ABS SHEET, EXTRUSION GRADE - VACUUM FORMABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D17-A |
RUBBER HEEL PADS - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D56-A1 |
TUBING, POLYOLEFIN, HEAT SHRINKABLE, DUAL WALL, ADHESIVELY LINED - SEMI-RIGID***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M99D54-A |
ELASTOMERIC FLOOR MAT***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D224-A |
POLYURETHANE FOAM, OPEN CELL - RETICULATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D355-B |
POLYPROPYLENE (PP), 42 % TALC AND TI02 FILLED, HEAT STABILIZED, MOLDING COMPOUND |
|
FORD ESF-M4D405-C1 |
POLYETHYLENE TEREPHTHALATE (PET), 30 % GLASS REINFORCED MOLDING COMPOUND |
|
FORD ESH-M4D166-C |
POLYPROPYLENE, TALC FILLED-, HEAT STABILIZED, INJECTION MOLDING COMPOUND |
|
FORD ESL-M4D359-A3 |
THERMOPLASTIC POLYESTER, NON-REINFORCED PBT - HIGH IMPACT MODIFIED |
|
FORD ESL-M4D414-A |
POLYETHYLENE, HIGH DENSITY INJECTION MOLDING COMPOUND |
|
FORD SJ-M4D9792-A |
ABS MOULDING COMPOUND, VERY HIGH HEAT RESISTANT |
|
FORD SK-M98D9736-B |
POLYURTETHANE FOAM WITH INTEGRAL SKIN - ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD SK-M98D9736-A |
|
FORD S-M4D4900-A |
COMPONENT B (POLYISOCYANATE) FOR PUR-FOAM - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M2D401-A5 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M2D401-A6 |
FLUOROSILICONE (FVMQ), OXYGENATED/OXIDIZED FUEL RESISTANT, LOW TEMPERATURE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M2D401-A8 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D280-A5 |
SILICONE ELASTOMER (VMQ), INHERENTLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D280-A7 |
SILICONE ELASTOMER (VMQ), NONLUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D452-A |
THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D627-A |
POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-REPLACES SL-M4D9656-A |
|
FORD WSB-M4D658-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED, 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D812-A |
POLYPROPYLENE (PP) COPOLYMER MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4d812-A |
|
FORD WSB-M4D816-A2 |
POLYCARBONATE + ABS BLEND (PC+ABS), MEDIUM IMPACT, HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D844-A10 |
POLYPHENYLENE ETHER + POLYSTYRENE (PPE+PS), BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSB-M4D844-A10*** |
|
FORD WSB-M4D860-A |
ACETAL (POM) COPOLYMER, 25 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D871-A4 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 85 A DUROMETER HARDNESS, INTERIOR **TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D871-A1 |
|
FORD WSB-M4D875-A2 |
POLYPROPYLENE COPOLYMER (PP), IMPACT MODIFIED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSB-M4D928-A1 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED MOLDING COMPOUND, RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D31-A1 |
LAMINATE, POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) OR POLYVINYL CHLORIDE (PVC) SKIN/POLYPROPYLENE (PP) FOAM, LOW PRESSURE MOLDING **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSD-M2D243-A2 |
POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D243-A5 |
POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D243-A4 |
|
FORD WSD-M2D378-A6 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 66 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D401-A |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT, COMPRESSION STRESS RELAXATION RESISTANT, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D404-A1 |
POLYURETHANE ELASTOMER (PUR) REACTION INJECTION MOLDED (RIM), GLASS ENCAPSULATION, 80 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D435-A |
RUBBER, HYDROGENATED NITRILE (HNBR) OXIDIZED AND OXYGENATED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D448-A |
POLYACRYLIC RUBBER (ACM), HOT AIR, HOT OIL AND COMPRESSION STRESS RELAXATION RESISTANT, 50 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D40-A1 |
TUBE, EPDM RUBBER, ENGINE COOLANT, LOW COMPRESSION SET **TO BE USED WITHFORD WSS-M99P1111-A** |
|
FORD WSE-M2D392-A |
FLUOROELASTOMER (FKM), OIL SEAL VALVE STEM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D412-A |
SILICONE (VMQ) RUBBER, 70 IRHD HARDNESS, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D418-A |
SILICONE (VMQ) RUBBER, HIGH TEMPERATUE RESISTANT, LONG LIFE GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A2 |
HOSE, EPDM RUBBER, META-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO- CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M96D34-A1 |
|
FORD WSG-M4D901-A1 |
POLYETHYLENE, HIGH DENSITY (PE-HD) BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M2D463-A |
HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) REFRIGERANT AND OIL RESISTANT O-RINGS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D415-A |
POLYURETHANE (PUR) FOAM, MOLDED, SEMI RIGID ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A6 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 25% MINERAL FILLED, MEDIUM HIGH IMPACT, HIGH SCRATCH RESISTANT MOLDING COMPOUND, MULTI SPOT DECOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D550-A |
|
FORD WSK-M4D633-A |
POLYETHYLENE (PE) EXPANDED SHEET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D637-A4 |
ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 34-44 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D637-A1 |
|
FORD WSK-M4D667-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 40% MINERAL FILLED |
|
FORD WSK-M4D671-A |
POLYAMIDE (PA) 46, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D676-A7 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 80 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D681-A2 |
ACETAL (POM) HOMOPOLYMER, IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D689-A7 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 60 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D693-A1 |
THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, INJECTION MOLDING COMPOUND-REPLACES SK-M4D9975-A |
|
FORD WSK-M4D701-A |
POLYAMIDE (PA) 12, FLEXIBLE, HEAT STABILIZED, MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D704-A3 |
POLYAMIDE (PA) 66, HEAT STABILIZED 40% MINERAL FILLED, REDUCED MOISTURE ABSORPTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D704-A1 |
|
FORD WSK-M4D708-A |
POLYAMIDE (PA) 6, 30% GLASS FIBER/GLASS SPHERE REINFORCED |
|
FORD WSK-M4D710-A |
ABS MOLDING COMPOUND, VERY HIGH HEAT RESISTANT AND HIGH TENSILE STRENGTH |
|
FORD WSK-M4D718-A4 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE (PC+PBT) BLEND FILM, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D721-A |
POLYETHYLENE (PE) MOLDING COMPOUND, HIGH DENSITY, MEDIUM MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D726-A1 |
POLYETHYLENE TEREPHTHALATE (PET), 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D727-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D744-A2 |
ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 11 - 17, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D751-A |
POLYETHYLENE (PE) FOAM, CROSSLINKED CLOSED CELL, 50 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D777-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D788-A1 |
POLYPROPYLENE (PP) COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D791-A2 |
ABS + POLYCARBONATE (ABS+PC) BLEND, MEDIUM HEAT RESISTANT, IMPROVED LOW TEMPERATURE IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D794-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, IMPACT MODIFIED, BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D796-A1 |
POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND |
|
FORD WSK-M4D799-A |
POLYETHYLENE (PE), MEDIUM DENSITY, LOW MELT FLOW RATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D805-A |
POLYVINYL CHLORIDE (PVC) FOAM, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D819-A2 |
POLYETHYLENE (PE) FOAM, PHYSICALLY CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D839-A |
ACETAL (POM) COPOLYMER, ELASTOMER MODIFIED MOLDING COMPOUND, EXTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D843-A2 |
POLYPHTHALAMIDE (PPA), IMPACT MODIFIED, 34% GLASS FIBER REINFORCED MOLDING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D844-A7 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), HIGH HEAT MOLDING COMPOUND |
|
FORD WSK-M4D849-A |
POLYAMIDE 6 (PA6), 30 % MINERAL REINFORCED MOLDING COMPOUND-REPLACES SK-M4D9695-A |
|
FORD WSK-M4D855-A |
POLYPROPYLENE (PP) HOMOPOLYMER, 20 % MINERAL/GLASS FIBER FILLED/REINFORCED MOLDING COMPOUND |
|
FORD WSK-M4D896-A1 |
POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA), 30 % GLASS FIBER REINFORCED MOLDING COMPOUND, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M96D33-A4 |
HOSE, NON-REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M96D37-A |
HOSE, POLYTETRAFLUOROETHYLENE (PTFE), CONTINUOUS FILAMENT GLASS BRAID REINFORCED, FUEL RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D496-A5 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D500-A1 |
POLYURETHANE FOAM, CLOSED CELL, STANDARD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D507-A2 |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 60 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D507-A |
|
FORD WSS-M2D507-A6 |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 25 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D642-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D796-A3 |
POLYCARBONATE (PC), MODIFIED, HIGH FLOW AND HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D822-A3 |
POLYAMIDE 6 (PA6), HEAT STABILIZED 20% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D827-A4 |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT MEDIUM IMPACT SUPER HIGH FLOW MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSS-M4D929-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D982-A |
POLYPROPYLENE (PP), 40% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D984-A |
FLEXIBLE COVERSTOCK, EXPANDABLE POLYVINYL CHLORIDE (PVC), INSTRUMENT PANEL *** TO BE USED WITH FORD WSS-M99P1111-A ***-Use WSS-M2F206-A1/A2 |
|
FORD WSS-M4D998-A1 |
RUBBER MODIFIED POLYVINYL CHLORIDE (PVC), ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D25-A3 |
HOSE, AIR CONDITIONING REFRIGERANT (NYLON 6 BARRIER) RESISTANT, MEDIUM PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M99D65-A1 |
THERMOPLASTIC POLYOLEFIN, LOW TEMPERATURE, FLEXIBLE, AUXILIARY FLOOR MAT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D264-A |
POLYURETHANE (PUR) FOAM, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D187-A |
THERMOPLASTIC POLYURETHANE (TPUR) MOLDING COMPOUND |
|
FORD ESA-M4D292-A |
TUBING, POLYVINYL CHLORIDE - VACUUM LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D369-A |
POLYETHYLENE, ULTRA HIGH MOLECULAR WEIGHT |
|
FORD ESA-M4D371-A |
POLYPROPYLENE MOLDING COMPOUND ULTRAVIOLET STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD ESA-M4D375-A |
POLYTETRAFLUOROETHYLENE - 10% GRAPHITE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D568-A |
THERMOPLASTIC POLYURETHANE (TPU) MOLDING COMPOUND, 40% LONG GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D246-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE INTERMEDIATE MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D246-A1 |
|
FORD ESB-M2D280-A2 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED - POLYCARBONATE COMPATIBLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D356-B |
POLYURETHANE (PUR) FOAM, RIGID, 37 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D100-A3 |
POLYCARBONATE (PC), OPTICAL GRADE - UNCOATED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESF-M4D100-A1 |
|
FORD ESB-M4D157-A |
POLYETHYLENE (PE), SHEET - CLEAR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D156-A |
|
FORD ESB-M4D284-C1 |
POLYVINYL CHLORIDE, EXTRUSION AND MOLDING GRADE - EXTERIOR - SOIL RESISTANT, (FORMERLY TYPE I) |
|
FORD ESB-M4D284-C4 |
POLYVINYL CHLORIDE, EXTRUSION AND MOLDING GRADE - EXTERIOR - SOIL RESISTANT, (FORMERLY TYPE IV)-Shown on ESB-M4D284-C1 |
|
FORD ESB-M4D354-A3 |
POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - SELF EXTINGUISHING - NONPAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D385-A2 |
ABS, MOLDING COMPOUND - HIGH IMPACT |
|
FORD ESB-M4D462-A1 |
POLYBUTYLENE TEREPHTHALATE, IMPACT MODIFIED - 10% GLASS FIBER REINFORCED |
|
FORD ESB-M4D492-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), MINERAL FILLER - COLOR PIGMENTED - HIGHER MOLD SHRINKAGE - PAINTED, APPLICATIONS ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B2 |
|
FORD ESB-M4D545-A |
NYLON/POLYPHENYLENE OXIDE ALLOY, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D576-A |
POLYARYLATE (PAR) MOLDING COMPOUND, HIGH HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D17-C |
RUBBER AUXILIARY FLOOR MATS - ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD ESB-M99D17-A |
|
FORD ESB-M99D55-A1 |
TUBING, POLYOLEFIN - HEAT SHRINKABLE - DUAL***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M99D57-A |
POLYURETHANE FOAM, PRESSURE SENSITIVE ADHESIVE, LOW PERMEABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D236-A |
SILICONE RUBBER, SEAL, OIL PAN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D364-A3 |
SILICONE RUBBER, HIGH ELONGATION, LOW VOLATILE - LONG LIFE GASKET, OIL PAN AND ROCKER ARM COVER ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESE-M2D364-A |
|
FORD ESE-M4D341-A1 |
POLYESTER, THERMOPLASTIC - 30% GLASS REINFORCED |
|
FORD ESF-M4D135-B |
POLYPROPYLENE EXTRUSION COMPOUND, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESF-M4D135-A; USE ESB-M4D308-A |
|
FORD ESF-M4D155-A |
POLYURETHANE FOAM, OPEN FINE CELL ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD ESF-M4D216-A |
NYLON (TYPE 612), MOLDING COMPOUND, HEAT RESISTANT |
|
FORD ESF-M4D255-A |
ABS MOLDING COMPOUND - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D335-A |
NYLON (TYPE 66), 43% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D341-C |
POLYESTER, THERMOPLASTIC (PBT), 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D291-C |
POLYURETHANE FOAM, RESTRICTED FLOW – FLEXIBLE FORMED IN PLACE - WITH ADHESIVE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D291-E |
POLYURETHANE FOAM, RESTRICTED FLOW - FLEXIBLE DIE CUT - WITH ADHESIVE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESH-M4D291-C |
|
FORD ESH-M4D380-A |
POLYURETHANE FOAM, LOW DENSITY SKINNED - FOAM IN PLACE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D192-A2 |
HOSE, EPDM RUBBER - RAYON OR POLYESTER REINFORCED, ENGINE COOLANT RESISTANT LOW COMPRESSION SET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESP-M2D294-A1 |
FLUOROELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D100-A |
OIL SEAL, NITRILE BUTADIENE RUBBER - AUTOMOTIVE TRANSMISSION - HIGH TEMPERATURE SERVICE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D230-A3 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESW-M2D230-A1 |
|
FORD ESW-M99D18-A |
FELT, SYNTHETIC FIBER FOR FILTERING ESW-M99D18-A AUTOMATIC TRANSMISSION FLUID***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SA-M4D9961-A |
POLYURETHANE ELASTOMER, SHORE HARDNESS D 60 - ***TO BE USED WITH FORD WSS-M99P1111*** |
|
FORD SK-M3D9601-B |
HOT STAMPING FILM, COLORED INTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M4D9940-A |
THERMOPLASTIC POLYOLEFINE ELASTOMER, SEMI RIGID |
|
FORD SK-M98D9502-A |
PVC HOSE, REINFORCED |
|
FORD SK-M98D9600-A |
POLYPROPYLENE SHEET, 40% WOOD FLOUR FILLED***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9565-B |
PLASTIC PART INTERIOR, HOT STAMPED |
|
FORD SK-M99D9696-A |
PU MOLDED PARTS, COLORED, WITH INTEGRAL SKIN, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9709-A |
PLASTIC COATED SPRING WIRE***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4622-A |
RUBBER MAT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4705-A |
POLYAMIDE COATED METAL ***TO BE USED WITH FORD WSS-M99P111-A*** |
|
FORD SS-M98D9530-A |
FUEL LINE PA 11/12 |
|
FORD WSB-M4D636-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D650-A |
THERMOPLASTIC POLYURETHANE/POLYCARBONATE (TPU+PC) BLEND MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D677-A |
POLYAMIDE (PA) 66, 30% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D683-A |
THERMOPLASTIC ETHER ESTER ELASTOMER (TEEE) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D735-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D738-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 30% MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D815-A3 |
POLYPROPYLENE (PP) FOAM, CLOSED CELL, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D815-A1 |
|
FORD WSB-M4D818-A2 |
POLYPROPYLENE (PP) SHEET, 40% LONG GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D834-A |
POLYPROPYLENE (PP), 15% GLASS SPHERE REINFORCED HEAT STABILIZED MOLDING COMPOUND ** TO BE USED WITH WSS-M99P1111-A ** |
|
FORD WSB-M4D844-A8 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPOUND |
|
FORD WSB-M4D854-A1 |
POLYPROPYLENE (PP), 30 % GLASS FIBER REINFORCED REMANUFACTURED MOLDING COMPOUND |
|
FORD WSB-M4D871-A3 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 75 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D871-A1 |
|
FORD WSB-M4D889-A1 |
POLYVINYL CHLORIDE (PVC), RIGID, 65 D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D898-A |
POLYPROPYLENE (PP) COPOLYMER, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A |
|
FORD WSB-M4D912-A |
ACETAL (POM) HOMOPOLYMER, 15 % PTFE AND SILICONE LUBRICATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D919-A |
POLYPROPYLENE (PP) COPOLYMER, IMPACT MODIFIED, 30 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D922-A |
POLYCARBONATE (PC), 10% GLASS FIBER REINFORCED, POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D925-A |
STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA), RUBBER MODIFIED, 42 % LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D926-A |
POLYCARBONATE (PC), POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D379-A4 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 68 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D14-A3 |
HOSE, EPDM RUBBER - RAYON OR POLYESTER REINFORCED, ENGINE COOLANT RESISTANT LOW COMPRESSION SET ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A3 |
WEATHERSTRIP/WINDLACE CO-EXTRUSTION, ETHYLENE-PROPYLENE (EPDM) FOAM/ETHYLENE-PROPYLENE RUBBER (EPDM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D27-A |
TUBE, CHLOROSULPHONATED POLYETHYLENE (CSM) RUBBER, MODERATE OIL RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D401-A2 |
FLUOROELASTOMER (FKM), OXIDIZED FUEL RESISTANT, COMPRESSION STRESS RELAXATION RESISTANT, LOW TEMPERATURE RESISTANT, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D401-A |
|
FORD WSE-M2D470-A2 |
DUCT, CPE, CHLORINATED POLYETHYLENE, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M2D470-A1 |
|
FORD WSF-M2D415-A2 |
POLYURETHANE (PUR) FOAM, OPEN CELL IMPACT/ENERGY ABSORBING, MEDIUM DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D779-A |
POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND, 100% RECYCLED PET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D396-A |
POLYURETHANE (PUR) FOAM, SEMI RIGID ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D417-A |
POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D556-A5 |
POLYPROPYLENE COPOLYMER, 24 % MINERAL FILLED, HIGH SCRATCH RESISTANT MOLDING COMPOUND, MULTI SPOT DECOR, INTERIOR-Shown on WSK-M4D556-A |
|
FORD WSK-M4D598-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D636-A |
POLYBUTYLENE TEREPHTHALATE (PBT) INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D637-A3 |
ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 19-32 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D637-A1 |
|
FORD WSK-M4D668-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 43% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D596-A |
|
FORD WSK-M4D670-A4 |
POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT, COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D676-A1 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 50 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D681-A |
ACETAL (POM) HOMOPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D989-B |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) CONDUCTIVE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D122-A |
HOSE, LOW PRESSURE - POWER STEERING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D197-A |
POLYETHYLENE, COPOLYMER - MOLDING COMPOUND |
|
FORD ESA-M4D359-A1 |
POLYBUTYLENE TEREPHTHALATE (PBT) INJECTION MOLDING COMPOUND - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M96D4-A |
HOSE, HYDRAULIC BRAKE ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M96D4-B |
|
FORD ESA-M96D4-A2 |
HOSE, HYDRAULIC BRAKE ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D148-A |
POLYVINYL CHLORIDE (PVC) COPOLYMER, HOT DIP PLASTISOL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D233-A |
POLYVINYL CHLORIDE (PVC) COPOLYMER SPONGE, MODIFIED SHEET STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M99P32-A |
|
FORD ESB-M4D233-C |
POLYVINYL CHLORIDE COPOLYMER FOAM, HIGH DENSITY ***TO BE USED WITH FORD M99P1111-A*** |
|
FORD ESB-M4D263-C1 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - HIGH HEAT - ELECTRICAL GRADE SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D357-A |
ACETAL COPOLYMER, GLASS FILLED - GLASS TO COPOLYMER - CHEMICALLY COUPLED |
|
FORD ESB-M4D464-A2 |
ACETAL HOMOPOLYMER, MODIFIED - HIGH IMPACT GRADE - PIGMENTED |
|
FORD ESB-M4D492-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), MINERAL/GLASS ESB-M4D492-A2 FIBER FILLER, COLOR PIGMENTED, PAINTED APPLICATIONS ONLY***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D492-A1; Use WSS-M4D492-B2 |
|
FORD ESB-M99D56-A2 |
TUBING, POLYOLEFIN, HEAT SHRINKABLE, DUAL WALL, ADHESIVELY LINED, SEMI-RIGID, FLAME RETARDED***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M99D56-A1 |
|
FORD ESL-M4D533-A |
NYLON (PA) 6/66 COPOLYMER, 33% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD ESW-M2D247-A |
NITRILE BUTADIENE RUBBER, HIGH HEAT RESISTANT - OIL SEALS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9883-A |
RUBBER WEATHERSTRIP, FLOCKED***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9883-B |
RUBBER WEATHERSTRIP, FLOCKED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on SK-M99D9883-A |
|
FORD S-M99D4580-A |
SINGLE OR MULTIPLE PLUG***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D658-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED, 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D821-A |
ACETAL (POM) COPOLYMER, 25 % GLASS BEAD FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D866-A1 |
ABS + POLYCARBONATE (ABS +PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D880-A |
POLYETHYLENE (PE), LINEAR LOW DENSITY MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D31-A2 |
LAMINATE, POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) OR POLYVINYL CHLORIDE (PVC) SKIN/POLYOLEFIN FOAM/POLYOLEFIN (PP) SKIN, LOW PRESSURE MOLDING - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D376-A |
ETHYLENE/PROPYLENE RUBBER (EPDM), ENGINE COOLANT AND COMPRESSION STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D378-A2 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 60 DUROMETER A HARDNESS, INTERIOR |
|
FORD WSE-M2D399-A3 |
SILICONE RUBBER (VMQ), MEDIUM HARDNESS, HIGH TEMPERATURE, LOW VOLATILE SILICONE, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D718-A3 |
POLYCARBONATE (PC) FILM, CLEAR AND TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSG-M4D807-A3 |
POLYPHENYLENE SULFIDE (PPS), 43 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 27% MINERAL FILLED - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 26% MINERAL FILLED, MEDIUM HIGH IMPACT INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D621-A |
POLYVINYL CHLORIDE (PVC), DRY BLEND SLUSH, MOULDED SKIN |
|
FORD WSK-M4D642-A3 |
POLYAMIDE (PA) 66, HEAT STABILIZED, 30% GLASS FIBER REINFORCED, REDUCED MOISTURE ABSORPTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD WSK-M4D648-A3 |
POLYAMIDE 66 (PA66), HEAT STABILIZED MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D689-A3 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 90 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D692-A2 |
THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, HEAT STABILIZED EXTRUSION MOLDING COMPOUND-Shown on WSK-M4D692-A1 |
|
FORD WSK-M4D698-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 33 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B2 |
|
FORD WSK-M4D765-A |
POLYPROPYLENE (PP) COPOLYMER, HIGH MELT RATE FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSK-M4D777-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH IMPACT, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2 |
|
FORD WSK-M4D777-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2 |
|
FORD WSK-M4D777-A6 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A2, and WSS-M4D952-A3 |
|
FORD WSK-M4D796-A2 |
POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D800-A |
POLYETHYLENE (PE), HIGH DENSITY, HIGH MELT FLOW RATE, LOW IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D807-A2 |
POLYPHENYLENE SULFIDE (PPS), 40 % GLASS FIBER REINFORCED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D829-A |
POLYAMIDE 12 (PA12), HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D844-A9 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), IMPACT RESISTANT MOLDING COMPOUND |
|
FORD WSL-M4D807-A |
POLYPHENYLENE SULFIDE (PPS), 40% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D401-A9 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D550-A8 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, PAINTABLE OR MOLDED-IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D631-A2 |
ABS MOLDING COMPOUND, HIGH COLD IMPACT INTERIOR |
|
FORD WSS-M4D713-A6 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 9 % GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D744-A4 |
ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.5 - 3.5, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D744-A2 |
|
FORD WSS-M4D804-A2 |
POLYAMIDE 6 (PA6), HEAT STABILIZED BLOW MOLDING GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D871-A5 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED **TO BE USED WITH FORD M99P1111-A*** |
|
FORD WSS-M4D961-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D985-A |
FLEXIBLE COVERSTOCK, SLUSH MOLDABLE POLYVINYL CHLORIDE (PVC), INSTRUMENT PANEL ***TO BE USED WITH FORD WSS-M99P1111-A***-(USE WSS-M4D985-A2) |
|
FORD ESA-M99D56-A3 |
TUBING, POLYOLEFIN, HEAT SHRINKABLE, DUAL WALL, ADHESIVE LINED, SEMI- RIGID***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D221-A |
POLYURETHANE FOAM, HIGH RESILIENCE - 38 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A3 |
POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D113-C |
POLYURETHANE FOAM, FLEXIBLE SLAB AND MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD ESB-M4D24-A |
ABS COPOLYMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D570-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) ESB-M4D570-A1 INJECTION MOLDING GRADE - EXTERIOR - UV STABILIZED***TO BE USED WITH FOED WSS-M99P1111-A***-Use WSS-M4D952-A2 |
|
FORD ESB-M4D605-A |
POLYPROPYLENE (PP), IMPACT MODIFIED, HEAT STABILIZED, 10% CALCIUM CARBONATE FILLED |
|
FORD ESB-M4D606-A |
POLYPROPYLENE (PP) HOMOPOLYMER, 13% TALC FILLED MOLDING COMPOUND |
|
FORD ESB-M4D75-A |
POLYURETHANE FOAM, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D43-A |
POLYPROPYLENE, 50% WOOD FIBER FILLED - EXTRUDED COMPOSITE***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D110-A |
MYLAR, TRANSFER FILM - HOT STAMPING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D305-A |
NYLON (TYPE 6) MOLDING COMPOUND, NUCLEATED HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D423-A |
NYLON (TYPE 6) COPOLYMER, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D672-A |
|
FORD ESF-M4D9-A10 |
ACRYLIC (PMMA), MEDIUM HEAT DEFLECTION TEMPERATURE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D230-A2 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESW-M2D230-A1 |
|
FORD SD-M99D9104-A |
MAT - THERMOPLASTIC RUBBER, SOUND DEADENING - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SJ-M99D9720-A |
INSULATING TUBE, HEAT RESISTANT***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SL-M4D9575-B |
POLYETHYLENE, HIGH DENSITY - LOW MFI |
|
FORD S-M4D4765-A |
POLYTETRAFLUOROETHYLENE - ***TO BE USED WITH FORD WSS-M99P111-A*** |
|
FORD WSA-M4D688-A3 |
ABS + POLYCARBONATE BLEND (ABS+PC), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSA-M4D688-A1 |
|
FORD WSB-M2D467-A |
THERMOPLASTIC POLYOLEFIN (TPO) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D619-A1 |
POLYPROPYLENE (PP) SHEET, 30% CONTINUOUS GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D724-A4 |
STYRENE/MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED MOLDING COMPOUND, 20% GLASS FIBER REINFORCED BLEND WITH 10% MAXIMUM PMMA REGRIND AND 20% MAXIMUM RECLAIM AND/OR REGRIND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D840-A4 |
ACETAL (POM) COPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.8 - 4.0, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D875-A |
POLYPROPYLENE COPOLYMER (PP), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSB-M4D883-A1 |
ACETAL (POM) COPOLYMER, 20% GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSB-M4D891-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA), HIGH MELT FLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D27-A |
POLYVINYL CHLORIDE (PVC), DRY BLEND SLUSH/RIGID SUBSTRATE, FORMED TRIM ASSEMBLY, INTERIOR **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSD-M2D379-A2 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 69 DUROMETER A HARDNESS, INTERIOR-Shown on WSD-M2D378-A2 |
|
FORD WSD-M2D380-A2 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 75 DUROMETER A HARDNESS, INTERIOR-Shown on WSD-M2D378-A2 |
|
FORD WSD-M2D405-A1 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 60 IRHD *** TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A3 |
HOSE, EPDM RUBBER, RAYON OR PET FIBER REINFORCED, ENGINE COOLANT AND ELECTROCHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS, OR A COPOLYMER PARA-ARAMID ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M96D34-A1 |
|
FORD WSF-M4D618-A |
ACETAL (POM) COPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M2D410-A |
POLYURETHANE (PUR) FOAM, BACTERIA/FUNGUS RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M96D25-A2 |
HOSE, AIR CONDITIONING REFRIGERANT (NYLON BARRIER) RESISTANT, MEDIUM PRESSURE |
|
FORD WSK-M4D595-A |
POLYAMIDE (PA) 6, 40% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D674-A |
|
FORD WSK-M4D596-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 50% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D608-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 33% GLASS FIBER REINFORCED IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D630-A |
ABS MOLDING COMPOUND, HIGH IMPACT INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D685-A |
ABS + POLYCARBONATE BLEND (ABS+PC), MEDIUM IMPACT STRENGTH MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D689-A4 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 95 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D689-A5 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 75 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D718-A2 |
POLYCARBONATE (PC) FILM, TRANSLUCENT, GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D744-A |
ACETAL (POM) HOMOPOLYMER, UV STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D755-A1 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 55 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D760-A |
POLYPROPYLENE (PP) COPOLYMER, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D777-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D952-A3 |
|
FORD WSK-M4D793-A |
ACETAL (POM) COpoPOLYMER, 26% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D798-A |
POLYETHYLENE (PE), LOW DENSITY, FLEXIBLE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D806-A |
ABS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D855-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20 % MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSK-M4D876-A1 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M98D25-A2 |
MODIFIED POLYPROPYLENE (PP), EPDM MODIFIED SHEET 25% WOOD FLOUR FILLED, VIRGIN AND/OR RECYCLED POLYMER MATRIX **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSS-M4D550-A9 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TE0) 22% MINERAL FILLED MEDIUM IMPACT MOLDING COMPOUND, MOLDED-IN-COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D664-A3 |
POLYMIDE (PA) 6, HEAT STABILIZED 33% GLASS FIBER REINFORCED, MINIMUM 25% PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D968-A |
|
FORD WSS-M4D665-A3 |
POLYAMIDE 6 (PA6), 15% GLASS FIBER REINFORCED POST INDUSTRIAL RECYCLATE (PIR) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D841-A6 |
POLYPROPYLENE (PP) COPOLYMER, 13 % TALC REINFORCED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D931-A1 |
POLYETHYLENE, HIGH DENSITY (PE-HD), 25 % MICA FILLED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D264-B |
POLYURETHANE (PUR) FOAM,, LOW DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESA-M2D264-A |
|
FORD ESA-M99D52-A |
POLYETHYLENE FILM, LOW DENSITY - STRETCH***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A4 |
POLYURETHANE (PUR) MICROCELLULAR ELASTOMER, REACTION INJECTION MOLDED (RIM), PAINTABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D311-A |
POLYETHYLENE, HIGH DENSITY - EXTRUSION GRADE - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D330-A1 |
IONOMER (ETHYLENE) MOLDING COMPOUND, CLEAR |
|
FORD ESB-M4D385-A |
ABS SHEET, EXTRUSION GRADE - VACUUM FORMABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D17-A |
RUBBER HEEL PADS - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D56-A1 |
TUBING, POLYOLEFIN, HEAT SHRINKABLE, DUAL WALL, ADHESIVELY LINED - SEMI-RIGID***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M99D54-A |
ELASTOMERIC FLOOR MAT***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D224-A |
POLYURETHANE FOAM, OPEN CELL - RETICULATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D355-B |
POLYPROPYLENE (PP), 42 % TALC AND TI02 FILLED, HEAT STABILIZED, MOLDING COMPOUND |
|
FORD ESF-M4D405-C1 |
POLYETHYLENE TEREPHTHALATE (PET), 30 % GLASS REINFORCED MOLDING COMPOUND |
|
FORD ESH-M4D166-C |
POLYPROPYLENE, TALC FILLED-, HEAT STABILIZED, INJECTION MOLDING COMPOUND |
|
FORD ESL-M4D359-A3 |
THERMOPLASTIC POLYESTER, NON-REINFORCED PBT - HIGH IMPACT MODIFIED |
|
FORD ESL-M4D414-A |
POLYETHYLENE, HIGH DENSITY INJECTION MOLDING COMPOUND |
|
FORD SJ-M4D9792-A |
ABS MOULDING COMPOUND, VERY HIGH HEAT RESISTANT |
|
FORD SK-M98D9736-B |
POLYURTETHANE FOAM WITH INTEGRAL SKIN - ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD SK-M98D9736-A |
|
FORD S-M4D4900-A |
COMPONENT B (POLYISOCYANATE) FOR PUR-FOAM - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M2D401-A5 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M2D401-A6 |
FLUOROSILICONE (FVMQ), OXYGENATED/OXIDIZED FUEL RESISTANT, LOW TEMPERATURE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M2D401-A8 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D280-A5 |
SILICONE ELASTOMER (VMQ), INHERENTLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D280-A7 |
SILICONE ELASTOMER (VMQ), NONLUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D452-A |
THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D627-A |
POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-REPLACES SL-M4D9656-A |
|
FORD WSB-M4D658-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED, 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D812-A |
POLYPROPYLENE (PP) COPOLYMER MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4d812-A |
|
FORD WSB-M4D816-A2 |
POLYCARBONATE + ABS BLEND (PC+ABS), MEDIUM IMPACT, HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D844-A10 |
POLYPHENYLENE ETHER + POLYSTYRENE (PPE+PS), BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSB-M4D844-A10*** |
|
FORD WSB-M4D860-A |
ACETAL (POM) COPOLYMER, 25 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D871-A4 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 85 A DUROMETER HARDNESS, INTERIOR **TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D871-A1 |
|
FORD WSB-M4D875-A2 |
POLYPROPYLENE COPOLYMER (PP), IMPACT MODIFIED, 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD WSB-M4D928-A1 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED MOLDING COMPOUND, RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M98D31-A1 |
LAMINATE, POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) OR POLYVINYL CHLORIDE (PVC) SKIN/POLYPROPYLENE (PP) FOAM, LOW PRESSURE MOLDING **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSD-M2D243-A2 |
POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D243-A5 |
POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D243-A4 |
|
FORD WSD-M2D378-A6 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 66 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D401-A |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT, COMPRESSION STRESS RELAXATION RESISTANT, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D404-A1 |
POLYURETHANE ELASTOMER (PUR) REACTION INJECTION MOLDED (RIM), GLASS ENCAPSULATION, 80 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D435-A |
RUBBER, HYDROGENATED NITRILE (HNBR) OXIDIZED AND OXYGENATED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D448-A |
POLYACRYLIC RUBBER (ACM), HOT AIR, HOT OIL AND COMPRESSION STRESS RELAXATION RESISTANT, 50 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D40-A1 |
TUBE, EPDM RUBBER, ENGINE COOLANT, LOW COMPRESSION SET **TO BE USED WITHFORD WSS-M99P1111-A** |
|
FORD WSE-M2D392-A |
FLUOROELASTOMER (FKM), OIL SEAL VALVE STEM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D412-A |
SILICONE (VMQ) RUBBER, 70 IRHD HARDNESS, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D418-A |
SILICONE (VMQ) RUBBER, HIGH TEMPERATUE RESISTANT, LONG LIFE GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A2 |
HOSE, EPDM RUBBER, META-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO- CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M96D34-A1 |
|
FORD WSG-M4D901-A1 |
POLYETHYLENE, HIGH DENSITY (PE-HD) BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M2D463-A |
HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) REFRIGERANT AND OIL RESISTANT O-RINGS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D415-A |
POLYURETHANE (PUR) FOAM, MOLDED, SEMI RIGID ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D550-A6 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 25% MINERAL FILLED, MEDIUM HIGH IMPACT, HIGH SCRATCH RESISTANT MOLDING COMPOUND, MULTI SPOT DECOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D550-A |
|
FORD WSK-M4D633-A |
POLYETHYLENE (PE) EXPANDED SHEET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D637-A4 |
ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 34-44 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D637-A1 |
|
FORD WSK-M4D667-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 40% MINERAL FILLED |
|
FORD WSK-M4D671-A |
POLYAMIDE (PA) 46, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D676-A7 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 80 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D681-A2 |
ACETAL (POM) HOMOPOLYMER, IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D689-A7 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 60 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D693-A1 |
THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, INJECTION MOLDING COMPOUND-REPLACES SK-M4D9975-A |
|
FORD WSK-M4D701-A |
POLYAMIDE (PA) 12, FLEXIBLE, HEAT STABILIZED, MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D704-A3 |
POLYAMIDE (PA) 66, HEAT STABILIZED 40% MINERAL FILLED, REDUCED MOISTURE ABSORPTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D704-A1 |
|
FORD WSK-M4D708-A |
POLYAMIDE (PA) 6, 30% GLASS FIBER/GLASS SPHERE REINFORCED |
|
FORD WSK-M4D710-A |
ABS MOLDING COMPOUND, VERY HIGH HEAT RESISTANT AND HIGH TENSILE STRENGTH |
|
FORD WSK-M4D718-A4 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE (PC+PBT) BLEND FILM, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D721-A |
POLYETHYLENE (PE) MOLDING COMPOUND, HIGH DENSITY, MEDIUM MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D726-A1 |
POLYETHYLENE TEREPHTHALATE (PET), 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D727-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D744-A2 |
ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 11 - 17, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D751-A |
POLYETHYLENE (PE) FOAM, CROSSLINKED CLOSED CELL, 50 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D777-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D788-A1 |
POLYPROPYLENE (PP) COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D791-A2 |
ABS + POLYCARBONATE (ABS+PC) BLEND, MEDIUM HEAT RESISTANT, IMPROVED LOW TEMPERATURE IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D794-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, IMPACT MODIFIED, BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D796-A1 |
POLYCARBONATE (PC), MODIFIED, HIGH HEAT RESISTANT MOLDING COMPOUND |
|
FORD WSK-M4D799-A |
POLYETHYLENE (PE), MEDIUM DENSITY, LOW MELT FLOW RATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D805-A |
POLYVINYL CHLORIDE (PVC) FOAM, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D819-A2 |
POLYETHYLENE (PE) FOAM, PHYSICALLY CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D839-A |
ACETAL (POM) COPOLYMER, ELASTOMER MODIFIED MOLDING COMPOUND, EXTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D843-A2 |
POLYPHTHALAMIDE (PPA), IMPACT MODIFIED, 34% GLASS FIBER REINFORCED MOLDING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D844-A7 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), HIGH HEAT MOLDING COMPOUND |
|
FORD WSK-M4D849-A |
POLYAMIDE 6 (PA6), 30 % MINERAL REINFORCED MOLDING COMPOUND-REPLACES SK-M4D9695-A |
|
FORD WSK-M4D855-A |
POLYPROPYLENE (PP) HOMOPOLYMER, 20 % MINERAL/GLASS FIBER FILLED/REINFORCED MOLDING COMPOUND |
|
FORD WSK-M4D896-A1 |
POLYBUTYLENE TEREPHTHALATE + ACRYLONITRILE STYRENE ACRYLATE BLEND (PBT+ASA), 30 % GLASS FIBER REINFORCED MOLDING COMPOUND, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M96D33-A4 |
HOSE, NON-REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M96D37-A |
HOSE, POLYTETRAFLUOROETHYLENE (PTFE), CONTINUOUS FILAMENT GLASS BRAID REINFORCED, FUEL RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D496-A5 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D500-A1 |
POLYURETHANE FOAM, CLOSED CELL, STANDARD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D507-A2 |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 60 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D507-A |
|
FORD WSS-M2D507-A6 |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 25 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D642-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D796-A3 |
POLYCARBONATE (PC), MODIFIED, HIGH FLOW AND HIGH HEAT RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D822-A3 |
POLYAMIDE 6 (PA6), HEAT STABILIZED 20% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D827-A4 |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT MEDIUM IMPACT SUPER HIGH FLOW MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSS-M4D929-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D982-A |
POLYPROPYLENE (PP), 40% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D984-A |
FLEXIBLE COVERSTOCK, EXPANDABLE POLYVINYL CHLORIDE (PVC), INSTRUMENT PANEL *** TO BE USED WITH FORD WSS-M99P1111-A ***-Use WSS-M2F206-A1/A2 |
|
FORD WSS-M4D998-A1 |
RUBBER MODIFIED POLYVINYL CHLORIDE (PVC), ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D25-A3 |
HOSE, AIR CONDITIONING REFRIGERANT (NYLON 6 BARRIER) RESISTANT, MEDIUM PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M99D65-A1 |
THERMOPLASTIC POLYOLEFIN, LOW TEMPERATURE, FLEXIBLE, AUXILIARY FLOOR MAT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D264-A |
POLYURETHANE (PUR) FOAM, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D187-A |
THERMOPLASTIC POLYURETHANE (TPUR) MOLDING COMPOUND |
|
FORD ESA-M4D292-A |
TUBING, POLYVINYL CHLORIDE - VACUUM LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D369-A |
POLYETHYLENE, ULTRA HIGH MOLECULAR WEIGHT |
|
FORD ESA-M4D371-A |
POLYPROPYLENE MOLDING COMPOUND ULTRAVIOLET STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD ESA-M4D375-A |
POLYTETRAFLUOROETHYLENE - 10% GRAPHITE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D568-A |
THERMOPLASTIC POLYURETHANE (TPU) MOLDING COMPOUND, 40% LONG GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D246-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE INTERMEDIATE MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D246-A1 |
|
FORD ESB-M2D280-A2 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED - POLYCARBONATE COMPATIBLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D356-B |
POLYURETHANE (PUR) FOAM, RIGID, 37 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D100-A3 |
POLYCARBONATE (PC), OPTICAL GRADE - UNCOATED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESF-M4D100-A1 |
|
FORD ESB-M4D157-A |
POLYETHYLENE (PE), SHEET - CLEAR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D156-A |
|
FORD ESB-M4D284-C1 |
POLYVINYL CHLORIDE, EXTRUSION AND MOLDING GRADE - EXTERIOR - SOIL RESISTANT, (FORMERLY TYPE I) |
|
FORD ESB-M4D284-C4 |
POLYVINYL CHLORIDE, EXTRUSION AND MOLDING GRADE - EXTERIOR - SOIL RESISTANT, (FORMERLY TYPE IV)-Shown on ESB-M4D284-C1 |
|
FORD ESB-M4D354-A3 |
POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - SELF EXTINGUISHING - NONPAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D385-A2 |
ABS, MOLDING COMPOUND - HIGH IMPACT |
|
FORD ESB-M4D462-A1 |
POLYBUTYLENE TEREPHTHALATE, IMPACT MODIFIED - 10% GLASS FIBER REINFORCED |
|
FORD ESB-M4D492-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), MINERAL FILLER - COLOR PIGMENTED - HIGHER MOLD SHRINKAGE - PAINTED, APPLICATIONS ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B2 |
|
FORD ESB-M4D545-A |
NYLON/POLYPHENYLENE OXIDE ALLOY, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D576-A |
POLYARYLATE (PAR) MOLDING COMPOUND, HIGH HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D17-C |
RUBBER AUXILIARY FLOOR MATS - ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD ESB-M99D17-A |
|
FORD ESB-M99D55-A1 |
TUBING, POLYOLEFIN - HEAT SHRINKABLE - DUAL***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M99D57-A |
POLYURETHANE FOAM, PRESSURE SENSITIVE ADHESIVE, LOW PERMEABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D236-A |
SILICONE RUBBER, SEAL, OIL PAN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D364-A3 |
SILICONE RUBBER, HIGH ELONGATION, LOW VOLATILE - LONG LIFE GASKET, OIL PAN AND ROCKER ARM COVER ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESE-M2D364-A |
|
FORD ESE-M4D341-A1 |
POLYESTER, THERMOPLASTIC - 30% GLASS REINFORCED |
|
FORD ESF-M4D135-B |
POLYPROPYLENE EXTRUSION COMPOUND, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESF-M4D135-A; USE ESB-M4D308-A |
|
FORD ESF-M4D155-A |
POLYURETHANE FOAM, OPEN FINE CELL ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD ESF-M4D216-A |
NYLON (TYPE 612), MOLDING COMPOUND, HEAT RESISTANT |
|
FORD ESF-M4D255-A |
ABS MOLDING COMPOUND - HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D335-A |
NYLON (TYPE 66), 43% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D341-C |
POLYESTER, THERMOPLASTIC (PBT), 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D291-C |
POLYURETHANE FOAM, RESTRICTED FLOW – FLEXIBLE FORMED IN PLACE - WITH ADHESIVE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D291-E |
POLYURETHANE FOAM, RESTRICTED FLOW - FLEXIBLE DIE CUT - WITH ADHESIVE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESH-M4D291-C |
|
FORD ESH-M4D380-A |
POLYURETHANE FOAM, LOW DENSITY SKINNED - FOAM IN PLACE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D192-A2 |
HOSE, EPDM RUBBER - RAYON OR POLYESTER REINFORCED, ENGINE COOLANT RESISTANT LOW COMPRESSION SET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESP-M2D294-A1 |
FLUOROELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D100-A |
OIL SEAL, NITRILE BUTADIENE RUBBER - AUTOMOTIVE TRANSMISSION - HIGH TEMPERATURE SERVICE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D230-A3 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESW-M2D230-A1 |
|
FORD ESW-M99D18-A |
FELT, SYNTHETIC FIBER FOR FILTERING ESW-M99D18-A AUTOMATIC TRANSMISSION FLUID***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SA-M4D9961-A |
POLYURETHANE ELASTOMER, SHORE HARDNESS D 60 - ***TO BE USED WITH FORD WSS-M99P1111*** |
|
FORD SK-M3D9601-B |
HOT STAMPING FILM, COLORED INTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M4D9940-A |
THERMOPLASTIC POLYOLEFINE ELASTOMER, SEMI RIGID |
|
FORD SK-M98D9502-A |
PVC HOSE, REINFORCED |
|
FORD SK-M98D9600-A |
POLYPROPYLENE SHEET, 40% WOOD FLOUR FILLED***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9565-B |
PLASTIC PART INTERIOR, HOT STAMPED |
|
FORD SK-M99D9696-A |
PU MOLDED PARTS, COLORED, WITH INTEGRAL SKIN, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M99D9709-A |
PLASTIC COATED SPRING WIRE***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4622-A |
RUBBER MAT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4705-A |
POLYAMIDE COATED METAL ***TO BE USED WITH FORD WSS-M99P111-A*** |
|
FORD SS-M98D9530-A |
FUEL LINE PA 11/12 |
|
FORD WSB-M4D636-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D650-A |
THERMOPLASTIC POLYURETHANE/POLYCARBONATE (TPU+PC) BLEND MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D677-A |
POLYAMIDE (PA) 66, 30% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D683-A |
THERMOPLASTIC ETHER ESTER ELASTOMER (TEEE) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D735-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D738-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 30% MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D815-A3 |
POLYPROPYLENE (PP) FOAM, CLOSED CELL, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D815-A1 |
|
FORD WSB-M4D818-A2 |
POLYPROPYLENE (PP) SHEET, 40% LONG GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D834-A |
POLYPROPYLENE (PP), 15% GLASS SPHERE REINFORCED HEAT STABILIZED MOLDING COMPOUND ** TO BE USED WITH WSS-M99P1111-A ** |
|
FORD WSB-M4D844-A8 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPOUND |
|
FORD WSB-M4D854-A1 |
POLYPROPYLENE (PP), 30 % GLASS FIBER REINFORCED REMANUFACTURED MOLDING COMPOUND |
|
FORD WSB-M4D871-A3 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 75 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D871-A1 |
|
FORD WSB-M4D889-A1 |
POLYVINYL CHLORIDE (PVC), RIGID, 65 D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D898-A |
POLYPROPYLENE (PP) COPOLYMER, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A |
|
FORD WSB-M4D912-A |
ACETAL (POM) HOMOPOLYMER, 15 % PTFE AND SILICONE LUBRICATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D919-A |
POLYPROPYLENE (PP) COPOLYMER, IMPACT MODIFIED, 30 % MINERAL FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D922-A |
POLYCARBONATE (PC), 10% GLASS FIBER REINFORCED, POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D925-A |
STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA), RUBBER MODIFIED, 42 % LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D926-A |
POLYCARBONATE (PC), POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D379-A4 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 68 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D14-A3 |
HOSE, EPDM RUBBER - RAYON OR POLYESTER REINFORCED, ENGINE COOLANT RESISTANT LOW COMPRESSION SET ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A3 |
WEATHERSTRIP/WINDLACE CO-EXTRUSTION, ETHYLENE-PROPYLENE (EPDM) FOAM/ETHYLENE-PROPYLENE RUBBER (EPDM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D27-A |
TUBE, CHLOROSULPHONATED POLYETHYLENE (CSM) RUBBER, MODERATE OIL RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D401-A2 |
FLUOROELASTOMER (FKM), OXIDIZED FUEL RESISTANT, COMPRESSION STRESS RELAXATION RESISTANT, LOW TEMPERATURE RESISTANT, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D401-A |
|
FORD WSE-M2D470-A2 |
DUCT, CPE, CHLORINATED POLYETHYLENE, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M2D470-A1 |
|
FORD WSF-M2D415-A2 |
POLYURETHANE (PUR) FOAM, OPEN CELL IMPACT/ENERGY ABSORBING, MEDIUM DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D779-A |
POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND, 100% RECYCLED PET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D396-A |
POLYURETHANE (PUR) FOAM, SEMI RIGID ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D417-A |
POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D556-A5 |
POLYPROPYLENE COPOLYMER, 24 % MINERAL FILLED, HIGH SCRATCH RESISTANT MOLDING COMPOUND, MULTI SPOT DECOR, INTERIOR-Shown on WSK-M4D556-A |
|
FORD WSK-M4D598-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D636-A |
POLYBUTYLENE TEREPHTHALATE (PBT) INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D637-A3 |
ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 19-32 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D637-A1 |
|
FORD WSK-M4D668-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 43% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D596-A |
|
FORD WSK-M4D670-A4 |
POLYPROPYLENE (PP) COPOLYMER, MEDIUM HIGH IMPACT, COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D676-A1 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 50 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D681-A |
ACETAL (POM) HOMOPOLYMER, MODIFIED, HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
|
AUTOMOTIVE ENGINEERING STANDARDS NEWS
|
|
|