| |
FORD - Plastics/Elastomers (VOLS. 5, 6, 7) Collection
Listing of active documents part of the FORD - Plastics/Elastomers (VOLS. 5, 6, 7) Collection.
|
FORD WSK-M4D689-A2 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 85 A HARDNESS, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D689-A6 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 65 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D697-A3 |
ABS + POLYCARBONATE BLEND (ABS+PC), HIGH IMPACT STRENGTH, HIGH HEAT, MOLDING COMPOUND, EXTERIOR-REPLACES ESK-M4D452-A1/A2 |
|
FORD WSK-M4D699-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 30% CALCIUM CARBONATE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D911-B |
|
FORD WSK-M4D704-A2 |
POLYAMIDE 66 (PA66), 40% MINERAL FILLED IMPROVED IMPACT STRENGTH MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D705-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D715-A2 |
POLYAMIDE (PA) 46, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D724-A1 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D724-A2 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED, 20% GLASS FIBER/10% ACRYLIC REGRIND REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D749-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D753-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), MODIFIED 20 % GLASS FIBER MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D754-A |
POLYAMIDE (PA) 6, HEAT STABILIZED, 15% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D755-A2 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 40 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D755-A1 |
|
FORD WSK-M4D762-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED MOLDING COMPOUND, HIGH IMPACT, PAINTABLE |
|
FORD WSK-M4D769-A |
ABS + POLYCARBONATE BLEND (ABS+PC) MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D788-A2 |
POLYPROPYLENE (PP) COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D788-A1 |
|
FORD WSK-M4D801-A |
POLYAMIDE (PA) 12, RIGID, HEAT STABILIZED, 12% GRAPHITE FILLED MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D802-A |
POLYAMIDE (PA) 12, SEMI FLEXIBLE, HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D804-A |
POLYAMIDE (PA) 6, HEAT STABILIZED, IMPACT MODIFIED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D819-A |
POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D830-A |
POLYETHYLENE TEREPHTHALATE (PET) FILM, TRANSPARENT ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D840-A2 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 11 - 16, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A **-Shown on WSK-M4D840-A1 |
|
FORD WSK-M4D840-A3 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 29 - 35, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A **-Shown on WSK-M4D840-A1 |
|
FORD WSK-M4D864-A3 |
ABS, GENERAL PURPOSE, RECOMPOUNDED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D876-A3 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D876-A1 |
|
FORD WSK-M4D890-A2 |
POLYAMIDE 6-3-T (PA6-3-T), AMORPHOUS MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M98D24-A1 |
FLUOROPOLYMER (PVDF) ALLOY FILM, EXTERIOR **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSK-M98D26-A |
LAMINATE, POLYETHYLENE (PE) FOAM, RECYCLED/POLYETHYLENE (PE) SHEET **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSL-M96D33-A3 |
HOSE, NON-REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M99D64-A |
POLYTETRAFLUOROETHYLENE (PTFE) FILM, EXPANDED, FUEL/ALCOHOL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D373-A2 |
ETHYLENE/ACRYLIC (AEM) RUBBER LOW COMPRESSION SET, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D418-A3 |
SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, LONG LIFE GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D496-A10 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D506-A |
THERMOPLASTIC ELASTOMER (TES + TPU) STYRENE BLOCK COPOLYMER 65 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D507-A |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 45 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D510-A6 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M4D309-C |
POLYCARBONATE (PC), 10 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D365-B3 |
POLYPROPYLENE, 40% CALCIUM CARBONATE FILLED EXTRUSION GRADE - STAMPABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D429-C3 |
NYLON (PA) 6, MOLDING COMPOUND, 34% MINERAL FILLED, EXTERIOR, PAINTED - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D550-A7 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, PAINTABLE OR MOLDED-IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D556-A7 |
POLYPROPYLENE PHOSPHORESCENT PIGMENT FILLED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D663-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED 33% GLASS FIBER REINFORCED, LASER MARKABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D682-A5 |
ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), VERY HIGH HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D822-A4 |
POLYAMIDE (PA) 6, HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED, MINIMUM 25% PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D840-A4 |
ACETAL (POM) COPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.8 - 4.0, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSS-M4D981-A2 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND, FOR PAINTED AIRBAG COVERS *** TO BE USED WITH FORD WSS-M99P1111-A ***-Shown on WSS-M4D981-A |
|
FORD WSS-M4D986-A |
POLYAMIDE (PA6)- 45% GLASS FIBER REINFORCED, MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D989-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 17% MINERAL FILLED CONDUCTIVE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D991-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, LOW CLTE, FOR MOLDED IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B1 |
|
FORD WSS-M96D25-A6 |
HOSE, AIR CONDITIONING REFRIGERANT (POLYAMIDE 6 BARRIER) RESISTANT, MEDIUM PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D33-B2 |
HOSE, REINFORCED RUBBER, DIESEL FUEL RESISTANT, CONDUCTIVE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D4-B |
HOSE, HYDRAULIC BRAKE ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A13 |
TUBING, POLYAMIDE 6/12 COVER, ETFE INNER TUBE NON-CONDUCTIVE, LOW PRESSURE VAPOR, LOW PERMEATING FUEL LINE **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSS-M98D33-A14 |
TUBING, POLYAMIDE 6/12 COVER, ETFE INNER TUBE CONDUCTIVE, HIGH PRESSURE LIQUID, LOW PERMEATING FUEL LINE **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSZ-M99D58-A |
FILM, TRANSPARENT POLYESTER OVERLAY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D287-A |
POLYURETHANE ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D106-A |
POLYVINYL CHLORIDE COPOLYMER, SOFT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D202-A |
POLYPROPYLENE, FLAME RETARDANT ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M4D638-B |
|
FORD ESA-M4D331-A |
NYLON (TYPE 6), HEAT STABILIZED - FLEXIBLE - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D374-A |
TUBING, NYLON (TYPE 11 AND TYPE 12) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D465-A2 |
TUBING, PTFE - POLYPHENYLENE SULFIDE FILLED-Shown on ESA-M4D465-A1 |
|
FORD ESA-M99D46-A |
COMPOSITE, NITRILE/ PHENOLIC POLYESTER FIBERS - PTFE IMPREGNATED - STEEL BACKED - BEARING***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D221-C |
POLYURETHANE FOAM, HIGH RESILIENCE - 27 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D221-A; |
|
FORD ESB-M2D246-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, EXTERIOR PAINTABLE - LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D280-A3 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D296-A |
THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER - INJECTION AND EXTRUSION COMPOUND - ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A1 |
POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D362-A |
POLYURETHANE FOAM, MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D105-B |
POLYESTER RESIN, GLASS FIBER REINFORCED MATCHED METAL DIE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D139-A |
EPOXY, TWO-COMPONENT - THERMALLY CONDUCTIVE WHEN USED WITH SILICA SAND - POTTING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D103-A |
TUBING, POLYVINYL CHLORIDE - EXTRUDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D128-A |
POLYETHYLENE, FOAM - PRESSURE SENSITIVE ADHESIVE BACKED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D262-C |
POLYURETHANE FOAM, HIGH AND MEDIUM DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD ESB-M4D297-A1 |
ABS, 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D330-A2 |
IONOMER (ETHYLENE) MOLDING COMPOUND, PIGMENTED - ZINC TYPE - EXTERIOR GRADE - PAINTABLE-Shown on ESB-M4D330-A1 |
|
FORD ESB-M4D353-A1 |
NYLON (TYPE 66), MINERAL FILLED - HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M98D10-A1 |
LAMINATE, FLUOROCARBON FILM/METAL, EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M98D14-A |
LAMINATE, POLYVINYL CHLORIDE FOAM POLYVINYL ÑESB-M98D14-A SKIN - RIGID SUBSTRATE FORMED TRIM ASSEMBLY |
|
FORD ESB-M99D50-A |
ETHYLENE METHYL ACRYLATE COPOLYMER (E/MA) FILM, CLEAR***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D53-A |
TUBING, FLUOROPOLYMER - HIGH HEAT RESISTANT***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D266-A |
EPDM RUBBER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D374-A |
HYDROGENATED NITRILE (HSN) RUBBER, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M4D428-A |
NYLON (TYPE 66) COPOLYMER, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D648-A |
|
FORD ESE-M99D40-A |
PLASTIC, MAGNETIC - INJECTION MOLDED***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M2D93-A |
FLUOROCARBON ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M3D69-A |
POLYESTER FILM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D217-A |
POLYSULFONE |
|
FORD ESF-M4D432-A |
POLYBUTYLENE TEREPHTHALATE, 40% GLASS/MINERAL REINFORCED |
|
FORD ESF-M4D511-A |
POLYAMIDE (PA) 66, PLASTICIZED - HIGH TEMPERATURE RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D648-A |
|
FORD ESF-M4D602-A |
POLYPHENYLENE ETHER (PPE) , HIGH IMPACT POLYSTYRENE BLEND, 30% GLASS FIBER REINFORCED,, INJECTION MOLDING COMPOUND, ELECTRICAL GRADE |
|
FORD ESH-M4D380-B |
POLYURETHANE FOAM, LOW DENSITY - SKINNED - FOAM IN PLACE - WITH BIOCIDE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESH-M4D380-A |
|
FORD ESH-M4D560-A |
POLYPROPYLENE (PP) INJECTION MOLDING COMPOUND, 36% GLASS FIBER AND MICA FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D365-A |
FLUORO ELASTOMER (FKM), ROTATING SHAFT OIL SEAL - LIP TYPE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D371-A |
POLYURETHANE (PUR) FOAM - MOULDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M4D469-A |
PVC MOLDING COMPOUND, COLD AND HEAT RESISTANT |
|
FORD ESW-M2D230-A4 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESW-M2D230-A1 |
|
FORD SA-M4D9605-A |
PVC MOLDING COMPOUND, FUEL RESISTANT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SA-M4D9945-A |
THERMOPLASTIC POLYOLEFINE ELASTOMER, SEMI RIGID |
|
FORD S-M4D4509-A |
POLYURETHANE FOAM - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4548-A |
PLASTICS, INTERIOR, FRONTSIDE METALLIZED - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4620-A |
PVC COATED RUBBER MAT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4621-A |
RUBBER MAT - *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD S-M99D4690-A |
PVC PARTS, EXTERIOR - *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD SQ-M2D9507-A |
CHLOROPRENE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M3D164-A |
UNSATURATED POLYESTER (UP), MODIFIED, 50% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND (SMC) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D403-A3 |
POLYURETHANE (PUR) FOAM, ENERGY ABSORBING, 140 KPA-USE WSS-M99P29-A |
|
FORD WSB-M2D462-A1 |
THERMOPLASTIC ELASTOMER, CHLORINATED ETHYLENE [TE(PE-C)], 60 A HARDNESS, EXTERIOR ONLY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D477-A |
THERMOPLASTIC ELASTOMER MOLDING COMPOUND, EXTERIOR, PVC AND NITRILE RUBBER MOLECULAR BLEND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D678-A |
POLYAMIDE (PA) 66, 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D677-A |
|
FORD WSB-M4D713-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) POST INDUSTRIAL REPROCESSED, MINERAL FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D747-A |
POLYPHENYLENE ETHER (PPE), MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D780-A2 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65 DUROMETER A HARDNESS MOLDING COMPOUND, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D780-A |
|
FORD WSB-M4D816-A |
POLYCARBONATE + ABS BLEND (PC+ABS), MEDIUM IMPACT, VERY HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D824-A |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS) FOAM, RIGID ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSB-M4D844-A11 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPUND |
|
FORD WSB-M4D853-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), IMPACT MODIFIED, 20 % MINERAL FILLED MOLDING COMPOUND |
|
FORD WSB-M4D854-A2 |
POLYPROPYLENE (PP), 40 % GLASS FIBER REINFORCED REMANUFACTURED COMPOUND |
|
FORD WSB-M4D900-A |
POLYPHENYLENE SULFIDE (PPS), 45% MINERAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D909-A1 |
POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS), CALENDERED SHEET, VACUUM FORMABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D914-A2 |
POLYCYCLOHEXYLENE DIMETHYLENE TEREPHTHALATE (PCT), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D929-A1 |
POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M99D63-A2 |
POLYPROPYLENE (PP) FLOOR MAT, GRAINED, SHAPED-Shown on WSB-M99D63-A1 |
|
FORD WSD-M2D379-A6 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 76 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A6 |
|
FORD WSD-M2D382-A1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 89 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A1 |
|
FORD WSD-M2D384-A1 |
THERMOPLASTIC POLYESTER ETHER ELASTOMER (TEEE), 90 DUROMETER A HARDNESS, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D401-A4 |
O-RING, EPICHLOROHYDRIN RUBBER (ECO) 65 IRHD, COMPRESSIVE STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D405-A3 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 80 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D405-A1 |
|
FORD WSD-M2D437-A |
POLYURETHANE (PUR) FOAM, MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D13-A |
HOSE, ETHYLENE/ACRYLIC (AEM) RUBBER REINFORCED - AUTOMATIC TRANSMISSION FLUID AND ENGINE OIL RESISTANT |
|
FORD WSD-M96D20-A |
TUBE, PVC/NITRILE (PVC/NBR) RUBBER-UNREINFORCED, OXYGENATED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A4 |
WEATHERSTRIP/WINDLACE CO-EXTRUSION, ETHYLENE-PROPYLENE (EPDM) FOAM/POLYVINYL CHLORIDE (PVC) ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSD-M96D21-A3 |
|
FORD WSD-M96D30-A |
HOSE, ETHYLENE/ACRYLIC (AEM) RUBBER REINFORCED, LOW PRESSURE, ENGINE OIL RESISTANT, 75 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D468-A1 |
TUBING, VACUUM, FLEX FUEL, OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A5 |
HOSE, EPDM RUBBER, META-ARAMID OR MODIFIED PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO-CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS, HIGH PRESSURE RESISTANCE ***TO BE USED WITH FOR WSS-M99P1111-A***-Shown on WSE-M96D34-A1 |
|
FORD WSF-M3D167-A |
UNSATURATED POLYESTER (UP), 24% GLASS FIBER WSF-M3D167-A REINFORCED, HIGH HEAT RESISTANT COMPRESSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D691-A |
POLYAMIDE (PA) 66, 35% LONG GLASS FIBER REINFORCED, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSB-M4D678-A |
|
FORD WSF-M4D728-A2 |
STYRENE/MALEIC ANHYDRIDE (SMA) COPOLYMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D785-A3 |
ABS + POLYCARBONATE BLEND (ABS+PC), 12 % TIO2 FILLED MOLDING COMPOUND |
|
FORD WSF-M4D803-A3 |
POLYPHENYLENE SULFIDE (PPS), 57% GLASS FIBER/ MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D881-A |
ABS MOLDING COMPOUND, CLEAR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D907-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D389-A |
POLYURETHANE (PUR) FOAM, OPEN CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D398-A |
POLYURETHANE (PUR) FOAM, MOLDED, INTEGRAL SKIN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D400-A |
POLYURETHANE (PUR) FOAM, MOLDED, HOT CURED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D402-A2 |
POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M2D402-A1; USE WSB-M2D402-A3 |
|
FORD WSK-M2D403-A2 |
POLYURETHANE (PUR) FOAM, MOLDED, LOW DENSITY, ENERGY ABSORBING ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M99P29-A |
|
FORD WSK-M2D408-A |
POLYURETHANE (PUR) FOAM, MOLDED, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D564-A |
POLYAMIDE (PA) 66, MOLDING COMPOUND - SELF EXTINGUISHING (SE) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D631-A |
ABS MOLDING COMPOUND, HIGH COLD IMPACT INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D635-A4 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 43 - 55 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D635-A1 |
|
FORD WSK-M4D643-A2 |
POLYPROPYLENE (PP), HOMOPOLYMER 40% MINERAL FILLED, MELT FLOW RATE 1 - 3.5 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D643-A1 |
|
FORD WSK-M4D656-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, HIGH IMPACT STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D661-A |
PVC/NBR MOLDING COMPOUND, FLEXIBLE, EXTERIOR |
|
FORD WSK-M4D676-A2 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 55 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A3 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 60 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D700-A |
POLYAMIDE (PA) 11 FLEXIBLE, HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND |
|
FORD WSK-M4D715-A |
POLYAMIDE (PA) 46, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D722-A |
ABS, 16% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D737-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), MODIFIED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D741-A3 |
POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D741-A2 |
|
FORD WSK-M4D742-A |
POLYAMIDE (PA) 6, EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D743-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 40% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSB-M4D678-A |
|
FORD WSK-M4D748-A |
ACETAL (POM) COPOLYMER, MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D758-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D759-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D759-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D764-A |
POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL, 200 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D777-A7 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D779-A2 |
POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D788-A3 |
POLYPROPYLENE (PP) COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D788-A1 |
|
FORD WSK-M4D791-A3 |
ABS + POLYCARBONATE (ABS+PC) BLEND, MEDIUM HEAT RESISTANT, IMPROVED LOW TEMPERATURE IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D797-A |
POLYCARBONATE (PC), 22% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D808-A |
POLYPHENYLENE SULFIDE (PPS), 45% GLASS FIBER REINFORCED, SELF EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D811-A |
POLYAMIDE (PA) 46, HEAT STABILIZED, OIL IMPREGNATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D877-A |
POLYAMIDE 66 (PA66), 20% ARAMID FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D653-A |
|
FORD WSK-M4D892-A1 |
POLYAMIDE 12 (PA12), HEAT STABILIZED, 20 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D906-A1 |
ABS, HIGH HEAT RESISTANT EXTRUSION MOLDING COMPOUND-Shown on WSK-M4D905-A1 |
|
FORD WSK-M4D913-A |
STYRENE/ACRYLONITRILE (SAN), TRANSPARENT, ANTISTATIC MODIFIED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M96D28-A |
LAMINATE, POLYURETHANE (PUR) FOAM/POLYVINYL CHLORIDE (PVC) FILM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M96D28-A2 |
LAMINATE, POLYURETHANE (PUR) FOAM PE-EXPANDED SHEETING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D430-A |
FLUOROELASTOMER (FKM) OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D442-A |
FLUOROELASTOMER (FKM), OIL SEAL, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D224-B1 |
POLYURETHANE FOAM, OPEN CELL, RETICULATED *** TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D241-A2 |
TUBING, ECO, EPICHLOROHYDRIN – FUEL AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-(Formerly ESE-M2D241-A2) |
|
FORD WSS-M2D376-A2 |
SILICONE RUBBER ENGINE COOLANT AND COMPRESSION STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D381-B1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED EXTERIOR WEATHERABLE 84 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D378-B1 |
|
FORD WSS-M2D452-A4 |
THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D463-A2 |
HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) SUPERIOR COMPRESSION SET, REGRIGERANT AND OIL RESISTANT O-RINGS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSH-M2D463-A |
|
FORD WSS-M2D492-A1 |
STYRENE BUTADIENE RUBBER (SBR), EXTRUSION AND/OR COMPRESSION MOLDING, POST CONSUMER RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D494-A1 |
POLYURETHANE (PUR) FOAM, SEMI-STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D500-A2 |
POLYURETHANE FOAM, CLOSED CELL, HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D500-A1 |
|
FORD WSS-M2D510-A4 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D595-A2 |
POLYAMIDE 6 (PA6), 40% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D649-A2 |
POLYETHYLENE (PE) FOAM, CHEMICALLY CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D713-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 9 % GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D713-A6 AND WSS-M4D713-A8 |
|
FORD WSS-M4D719-A2 |
POLYAMIDE (PA) 66, 38% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, 25% POST CONSUMER MINERAL FILLED NYLON ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D719-A |
|
FORD WSS-M4D719-A3 |
POLYAMIDE (PA) 66, 40% MINERAL REINFORCED MOLDING COMPOUND, HEAT STABILIZED, 25% POST CONSUMER CONTENT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D823-A2 |
POLYAMIDE 66 (PA66), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D861-A3 |
POLYPHTHALAMIDE (PPA), 33% GLASS FIBER REINFORCED, COOLING AGENT RESISTANT, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D891-A3 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND, HIGH IMPACT AND HIGHER FLOW ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D908-A2 |
ACRYLONITRILE BUTADIENE STYRENE (ABS), HEAT RESISTANT, POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D908-A |
|
FORD WSS-M4D926-A2 |
POLYCARBONATE (PC), IMPACT MODIFIED, 25 % MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D936-A1 |
POLYPROPYLENE (PP) COPOLYMER, 30 % GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSS-M4D947-A1 |
POLYAMIDE 66 (PA66), 30 % GLASS FIBER + 15 % PTFE POWDER FILLED IMPACT MODIFIED MOLDING COMPOUND |
|
FORD WSS-M4D959-A |
POLYPROPYLENE (PP), HOMOPOLYMER 20% CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D959-A2 |
POLYPROPLYENE (PP), HOMOPOLYMER 30% CALCIUM CARBONATE FILLED, HEAT STABILIZED, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D964-A3 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D973-A |
POLYAMIDE (PA6/66) 6/66 COPOLYMER, HEAT STABILIZED 13% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D653-A |
|
FORD WSS-M4D975-A |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND AIRBAG COVER, 87 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D976-A |
POLYAMIDE 6 + POLYPROPYLENE BLEND (PA6 + PP), 8% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D988-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, LOW CLTE, FOR MOLDED-IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B1 |
|
FORD WSS-M4D990-A |
POLYPROPYLENE HOMOPOYLMER + POLYAMIDE 6 BLEND (PP+PA6) UV STABILIZED, THERMOPLASTIC MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D44-A |
HOSE, LOW PRESSURE ENGINE OIL COOLER **TO BE USED WITH FORD WSS-M99P111-A** |
|
FORD WSS-M98D33-A1 |
TUBE, POLYAMIDE 12 (PA12) COVER, TIE LAYER, ETFE TUBE, LOW PRESSURE, FUEL/ALCOHOL RESISTANT, NON-CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A4 |
TUBE, POLYAMIDE 12 (PA12), PVDF BARRIER, CONDUCTIVE POLYAMIDE 12 TUBE, HIGH PRESSURE, FUEL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A5 |
TUBE, POLYAMIDE 12 (PA12) COVER, ETFE TUBE, LOW PRESSURE, FUEL/ALCOHOL RESISTANT, NON-CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A6 |
TUBE, POLYAMIDE 12 (PA12) COVER, ETFE TUBE, ETFE TUBE, HIGH PRESSURE, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D191-B |
HOSE, EPDM - HEATER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D223-A |
RUBBER, ENGINE MOUNTS - INSULATOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D313-A3 |
EPDM RUBBER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D321-A |
RUBBER, POLYPROPYLENE OXIDE - CALCIUM CARBONATE AND TITANIUM DIOXIDE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D324-A |
RUBBER, PVC/NBR BLEND - FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D50-A |
HOSE, REINFORCED RUBBER - FUEL LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D52-A |
HOSE, HIGH TEMPERATURE - LOW PRESSURE - OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D185-A |
NYLON, 20% GLASS FIBER REINFORCED |
|
FORD ESA-M4D333-A |
POLYVINYL CHLORIDE, TRANSPARENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D370-A |
POLYTETRAFLUOROETHYLENE, 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D420-A |
ACETAL, HOMOPOLYMER-20% TETRAFLUOROETHYLENE (TFE) FILLED |
|
FORD ESA-M4D420-B |
ACETAL, HOMOPOLYMER-20% TETRAFLUOROETHYLENE (TFE) FILLED,-Shown on ESA-M4D420-A |
|
FORD ESA-M4D429-A1 |
POLYAMIDE (PA) 6, MINERAL FILLED - ELECTROPLATING GRADE - EXTERIOR |
|
FORD ESA-M4D429-A2 |
POLYAMIDE (PA) 6, MINERAL FILLED - EXTERIOR - PAINTED-Shown on ESA-M4D429-A1 |
|
FORD ESA-M4D429-A3 |
POLYAMIDE (PA) 6, MINERAL FILLED - EXTERIOR - PAINTED-Shown on ESA-M4D429-A1 |
|
FORD ESA-M4D429-A4 |
NYLON 6, 34% MINERAL FILLED - HEAT STABILIZED - HIGH IMPACT, EXTERIOR PAINTED |
|
FORD ESA-M4D434-A1 |
STYRENE MALEIC ANHYDRIDE TERPOLYMER (SMA), MODIFIED MOLDING COMPOUND, GENERAL PURPOSE |
|
FORD ESB-M2D221-B |
POLYURETHANE FOAM, HIGH RESILIENCE - 34 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D221-A |
|
FORD ESB-M2D221-D |
POLYURETHANE FOAM, HIGH LOAD BEARING - 42 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D226-A1 |
EPDM RUBBER, EXTERIOR - COLOR PIGMENTED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D263-A3 |
POLYURETHANE, MICROCELLULAR ELASTOMER - LIQUID REACTION MOLDED (LRM) - INTERMEDIATE MODULUS - IMPROVED TEMPERATURE PERFORMANCE - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D280-A4 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D295-A |
SILICONE ELASTOMER, EXTERIOR - WEATHERABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D297-A5 |
POLYURETHANE FOAM, ACOUSTICAL - 80 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D319-A |
POLYURETHANE FOAM, ACOUSTICAL - 80 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D339-A |
EPDM ELASTOMER, SQUEEZE BULB - LUMBAR SUPPORT SYSTEM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A2 |
POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D350-A1 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED - LIQUID INJECTION MOLDING (LIM) GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D395-A |
POLYURETHANE (PUR) ELASTOMER, MICROCELLULAR, 11-12% GLASS FIBER REINFORCED, RRIM, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D105-C |
POLYESTER RESIN, GLASS FIBER REINFORCED MATCHED METAL DIE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D118-C |
PHENOLIC INJECTION MOLDING COMPOUND HEAT RESISTANT - MINERAL FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D145-A |
POLYESTER RESIN, GLASS FIBER REINFORCED, LOW SHRINKAGE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D137-B |
POLYVINYL CHLORIDE PLASTISOL, CAST ON STEEL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D147-A |
POLYETHYLENE (PE), LINEAR - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D152-A |
POLYETHYLENE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D151-A |
|
FORD ESB-M4D156-A |
POLYETHYLENE (PE), SHEET - BLACK ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D169-A2 |
ACETAL RESIN, 15% PTFE FILLED |
|
FORD ESB-M4D195-B |
POLYVINYL CHLORIDE, DIELECTRIC BONDING GRADE, CARPET INLAY |
|
FORD ESB-M4D263-C2 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - GENERAL PURPOSE GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D297-A2 |
ABS, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D297-A1 |
|
FORD ESB-M4D334-A |
POLYPROPYLENE COPOLYMER, SELF-EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD ESB-M4D353-A2 |
NYLON (TYPE 66), MINERAL FILLED - HIGH MODULUS GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D353-A1; |
|
FORD ESB-M4D353-A4 |
NYLON (TYPE 66), MINERAL FILLED - EXTERIOR, PAINTED BODY COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D353-A1; |
|
FORD ESB-M4D354-A2 |
POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - INTERNALLY LUBRICATED |
|
FORD ESB-M4D365-A2 |
POLYPROPYLENE, 40% CALCIUM CARBONATE FILLED - EXTRUSION GRADE - STAMPABLE, DISCONTINUED, USE DELTA ES- E97B1011014AA & ESB- M4D365-B2 |
|
FORD ESB-M4D365-B2 |
POLYPROPYLENE, 40% CALCIUM CARBONATE FILLED - EXTRUSION GRADE - STAMPABLE-Shown on ESB-M4D365-A2 |
|
FORD ESB-M4D366-A1 |
NYLON, (TYPE 6), 40% GLASS REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D400-A |
LAMINATE RIGID POLYSTYRENE, FOAM/FILM- THERMOFORMABLE, HEADLINING SUBSTRATE |
|
FORD ESB-M4D404-A |
THERMOPLASTIC POLYOLEFIN, ELASTOMER AND GLASS FIBER MODIFIED, MOLDING COMPOUND, INTERIOR GRADE, COLOR PIGMENTED, UV STABILIZED |
|
FORD ESB-M4D436-A3 |
POLYETHERIMIDE (PEI), 30% GLASS FIBER REINFORCED, INJECTION MOLDING COMPOUND |
|
FORD ESB-M4D442-A |
POLYCARBONATE, POLYBUTYLENE TEREPHTHALATE MOLDING COMPOUND |
|
FORD ESB-M4D489-A3 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED |
|
FORD ESB-M4D4-A |
ACETATE - BUTYRATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D570-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), EXTRUSION GRADE, EXTERIOR, UV STABILIZED***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D570-A1; Use WSS-M2D382-B1 |
|
FORD ESB-M98D15-A1 |
LAMINATE, POLYVINYL CHLORIDE SKIN, POLYVINYL CHLORIDE FOAM, POLYVINYL CHLORIDE SKIN, RIGID SUBSTRATE, FORMED TRIM ASSEMBLY |
|
FORD ESB-M98D17-A1 |
LAMINATE, METALLIZED POLYESTER/PVC **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD ESB-M99D35-A |
POLYVINYL CHLORIDE, REPROCESSED FLOOR MAT |
|
FORD ESB-M99D42-A |
POLYPROPYLENE, NYLON FLOCKED SURFACE *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD ESB-M99D43-B |
POLYPROPYLENE, 50% WOOD FIBER FILLED - EXTRUDED COMPOSITE***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M99D43-A |
|
FORD ESB-M99D45-A |
POLYURETHANE FILM, WATER BARRIER***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D55-A2 |
TUBING, POLYOLEFIN - HEAT SHRINKABLE - DUAL WALL - ADHESIVELY LINES - FLEXIBLE - FLAME RETARDED***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M99D55-A1 |
|
FORD ESE-M2D164-A |
HOSE, EPDM RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D235-D2 |
BELT, POSITIVE DRIVE - HIGH TEMPERATURE POLYCHLOROPRENE - GLASS FIBER REINFORCED, NYLON FABRIC FACING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D240-A |
FLUOROELASTOMER DIAPHRAGM, 70 DUROMETER |
|
FORD ESE-M2D289-A |
TUBING, CHLORINATED POLYETHYLENE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D345-A2 |
HOSE, SILICONE - HIGH TEMPERATURE - COOLANT RESISTANT - HIGH BURST ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESE-M2D345-A1 * |
|
FORD ESE-M2D352-A |
TUBING, RUBBER - LARGE DIAMETER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D363-A |
FLUOROELASTOMER (FKM), HIGH TEMPERATURE RESISTANT - GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D364-A |
SILICONE RUBBER, HIGH ELONGATION - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D53-A2 |
FLUOROELASTOMER, OIL SEAL - VALVE STEM - HIGH HEAT - ABRASION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M4D341-A2 |
POLYESTER, THERMOPLASTIC - 30% GLASS REINFORCED MINERAL FILLED-Shown on ESE-M4D341-A1 |
|
FORD ESF-M2D129-A |
FLUOROSILICONE RUBBER, 50 DUROMETER |
|
FORD ESF-M3D78-A |
PHENOLIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D159-A |
NYLON (TYPE 66), GLASS FIBER REINFORCED - MOLYBDENUM DISULFIDE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D164-A |
POLYURETHANE (PUR) FOAM, OPEN CELL, FILTER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D27-A |
TETRAFLUOROETHYLENE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D298-A |
POLYPROPYLENE MOLDING COMPOUND, EXTRA HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M4D938-A1 |
|
FORD ESF-M4D354-A6 |
POLYBUTYLENE TEREPHTHALATE, 17% GLASS FIBER REINFORCED - SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D405-B |
POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD ESF-M4D405-D2 |
POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND-Shown on ESF-M4D405-B |
|
FORD ESF-M96D22-A |
HOSE, REINFORCED, FLUOROELASTOMER (FKM) RUBBER, OXYGENATED AND OXIDIZED FUEL RESISTANT, IN-TANK HIGH PRESSURE FUEL LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M99D48-A |
POLYPROPYLENE/POLYALLOMER FIBERS, EXTRUDED - FUEL RESISTANT |
|
FORD ESH-M2D190-B1 |
SEAL, RADIATOR CAP - NBR - ETHYLENE GLYCOL RESISTANT LATHE CUT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D689-A2 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 85 A HARDNESS, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D689-A6 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 65 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D697-A3 |
ABS + POLYCARBONATE BLEND (ABS+PC), HIGH IMPACT STRENGTH, HIGH HEAT, MOLDING COMPOUND, EXTERIOR-REPLACES ESK-M4D452-A1/A2 |
|
FORD WSK-M4D699-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 30% CALCIUM CARBONATE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D911-B |
|
FORD WSK-M4D704-A2 |
POLYAMIDE 66 (PA66), 40% MINERAL FILLED IMPROVED IMPACT STRENGTH MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D705-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D715-A2 |
POLYAMIDE (PA) 46, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D724-A1 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D724-A2 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED, 20% GLASS FIBER/10% ACRYLIC REGRIND REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D749-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D753-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), MODIFIED 20 % GLASS FIBER MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D754-A |
POLYAMIDE (PA) 6, HEAT STABILIZED, 15% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D755-A2 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 40 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D755-A1 |
|
FORD WSK-M4D762-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED MOLDING COMPOUND, HIGH IMPACT, PAINTABLE |
|
FORD WSK-M4D769-A |
ABS + POLYCARBONATE BLEND (ABS+PC) MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D788-A2 |
POLYPROPYLENE (PP) COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D788-A1 |
|
FORD WSK-M4D801-A |
POLYAMIDE (PA) 12, RIGID, HEAT STABILIZED, 12% GRAPHITE FILLED MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D802-A |
POLYAMIDE (PA) 12, SEMI FLEXIBLE, HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D804-A |
POLYAMIDE (PA) 6, HEAT STABILIZED, IMPACT MODIFIED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D819-A |
POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D830-A |
POLYETHYLENE TEREPHTHALATE (PET) FILM, TRANSPARENT ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D840-A2 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 11 - 16, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A **-Shown on WSK-M4D840-A1 |
|
FORD WSK-M4D840-A3 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 29 - 35, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A **-Shown on WSK-M4D840-A1 |
|
FORD WSK-M4D864-A3 |
ABS, GENERAL PURPOSE, RECOMPOUNDED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D876-A3 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D876-A1 |
|
FORD WSK-M4D890-A2 |
POLYAMIDE 6-3-T (PA6-3-T), AMORPHOUS MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M98D24-A1 |
FLUOROPOLYMER (PVDF) ALLOY FILM, EXTERIOR **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSK-M98D26-A |
LAMINATE, POLYETHYLENE (PE) FOAM, RECYCLED/POLYETHYLENE (PE) SHEET **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSL-M96D33-A3 |
HOSE, NON-REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M99D64-A |
POLYTETRAFLUOROETHYLENE (PTFE) FILM, EXPANDED, FUEL/ALCOHOL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D373-A2 |
ETHYLENE/ACRYLIC (AEM) RUBBER LOW COMPRESSION SET, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D418-A3 |
SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, LONG LIFE GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D496-A10 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D506-A |
THERMOPLASTIC ELASTOMER (TES + TPU) STYRENE BLOCK COPOLYMER 65 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D507-A |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 45 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D510-A6 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M4D309-C |
POLYCARBONATE (PC), 10 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D365-B3 |
POLYPROPYLENE, 40% CALCIUM CARBONATE FILLED EXTRUSION GRADE - STAMPABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D429-C3 |
NYLON (PA) 6, MOLDING COMPOUND, 34% MINERAL FILLED, EXTERIOR, PAINTED - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D550-A7 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, PAINTABLE OR MOLDED-IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D556-A7 |
POLYPROPYLENE PHOSPHORESCENT PIGMENT FILLED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D663-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED 33% GLASS FIBER REINFORCED, LASER MARKABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D682-A5 |
ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), VERY HIGH HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D822-A4 |
POLYAMIDE (PA) 6, HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED, MINIMUM 25% PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D840-A4 |
ACETAL (POM) COPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.8 - 4.0, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSS-M4D981-A2 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND, FOR PAINTED AIRBAG COVERS *** TO BE USED WITH FORD WSS-M99P1111-A ***-Shown on WSS-M4D981-A |
|
FORD WSS-M4D986-A |
POLYAMIDE (PA6)- 45% GLASS FIBER REINFORCED, MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D989-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 17% MINERAL FILLED CONDUCTIVE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D991-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, LOW CLTE, FOR MOLDED IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B1 |
|
FORD WSS-M96D25-A6 |
HOSE, AIR CONDITIONING REFRIGERANT (POLYAMIDE 6 BARRIER) RESISTANT, MEDIUM PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D33-B2 |
HOSE, REINFORCED RUBBER, DIESEL FUEL RESISTANT, CONDUCTIVE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D4-B |
HOSE, HYDRAULIC BRAKE ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A13 |
TUBING, POLYAMIDE 6/12 COVER, ETFE INNER TUBE NON-CONDUCTIVE, LOW PRESSURE VAPOR, LOW PERMEATING FUEL LINE **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSS-M98D33-A14 |
TUBING, POLYAMIDE 6/12 COVER, ETFE INNER TUBE CONDUCTIVE, HIGH PRESSURE LIQUID, LOW PERMEATING FUEL LINE **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSZ-M99D58-A |
FILM, TRANSPARENT POLYESTER OVERLAY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D287-A |
POLYURETHANE ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D106-A |
POLYVINYL CHLORIDE COPOLYMER, SOFT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D202-A |
POLYPROPYLENE, FLAME RETARDANT ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M4D638-B |
|
FORD ESA-M4D331-A |
NYLON (TYPE 6), HEAT STABILIZED - FLEXIBLE - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D374-A |
TUBING, NYLON (TYPE 11 AND TYPE 12) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D465-A2 |
TUBING, PTFE - POLYPHENYLENE SULFIDE FILLED-Shown on ESA-M4D465-A1 |
|
FORD ESA-M99D46-A |
COMPOSITE, NITRILE/ PHENOLIC POLYESTER FIBERS - PTFE IMPREGNATED - STEEL BACKED - BEARING***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D221-C |
POLYURETHANE FOAM, HIGH RESILIENCE - 27 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D221-A; |
|
FORD ESB-M2D246-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, EXTERIOR PAINTABLE - LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D280-A3 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D296-A |
THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER - INJECTION AND EXTRUSION COMPOUND - ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A1 |
POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D362-A |
POLYURETHANE FOAM, MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D105-B |
POLYESTER RESIN, GLASS FIBER REINFORCED MATCHED METAL DIE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D139-A |
EPOXY, TWO-COMPONENT - THERMALLY CONDUCTIVE WHEN USED WITH SILICA SAND - POTTING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D103-A |
TUBING, POLYVINYL CHLORIDE - EXTRUDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D128-A |
POLYETHYLENE, FOAM - PRESSURE SENSITIVE ADHESIVE BACKED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D262-C |
POLYURETHANE FOAM, HIGH AND MEDIUM DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD ESB-M4D297-A1 |
ABS, 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D330-A2 |
IONOMER (ETHYLENE) MOLDING COMPOUND, PIGMENTED - ZINC TYPE - EXTERIOR GRADE - PAINTABLE-Shown on ESB-M4D330-A1 |
|
FORD ESB-M4D353-A1 |
NYLON (TYPE 66), MINERAL FILLED - HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M98D10-A1 |
LAMINATE, FLUOROCARBON FILM/METAL, EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M98D14-A |
LAMINATE, POLYVINYL CHLORIDE FOAM POLYVINYL ÑESB-M98D14-A SKIN - RIGID SUBSTRATE FORMED TRIM ASSEMBLY |
|
FORD ESB-M99D50-A |
ETHYLENE METHYL ACRYLATE COPOLYMER (E/MA) FILM, CLEAR***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D53-A |
TUBING, FLUOROPOLYMER - HIGH HEAT RESISTANT***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D266-A |
EPDM RUBBER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D374-A |
HYDROGENATED NITRILE (HSN) RUBBER, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M4D428-A |
NYLON (TYPE 66) COPOLYMER, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D648-A |
|
FORD ESE-M99D40-A |
PLASTIC, MAGNETIC - INJECTION MOLDED***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M2D93-A |
FLUOROCARBON ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M3D69-A |
POLYESTER FILM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D217-A |
POLYSULFONE |
|
FORD ESF-M4D432-A |
POLYBUTYLENE TEREPHTHALATE, 40% GLASS/MINERAL REINFORCED |
|
FORD ESF-M4D511-A |
POLYAMIDE (PA) 66, PLASTICIZED - HIGH TEMPERATURE RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D648-A |
|
FORD ESF-M4D602-A |
POLYPHENYLENE ETHER (PPE) , HIGH IMPACT POLYSTYRENE BLEND, 30% GLASS FIBER REINFORCED,, INJECTION MOLDING COMPOUND, ELECTRICAL GRADE |
|
FORD ESH-M4D380-B |
POLYURETHANE FOAM, LOW DENSITY - SKINNED - FOAM IN PLACE - WITH BIOCIDE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESH-M4D380-A |
|
FORD ESH-M4D560-A |
POLYPROPYLENE (PP) INJECTION MOLDING COMPOUND, 36% GLASS FIBER AND MICA FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D365-A |
FLUORO ELASTOMER (FKM), ROTATING SHAFT OIL SEAL - LIP TYPE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D371-A |
POLYURETHANE (PUR) FOAM - MOULDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M4D469-A |
PVC MOLDING COMPOUND, COLD AND HEAT RESISTANT |
|
FORD ESW-M2D230-A4 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESW-M2D230-A1 |
|
FORD SA-M4D9605-A |
PVC MOLDING COMPOUND, FUEL RESISTANT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SA-M4D9945-A |
THERMOPLASTIC POLYOLEFINE ELASTOMER, SEMI RIGID |
|
FORD S-M4D4509-A |
POLYURETHANE FOAM - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4548-A |
PLASTICS, INTERIOR, FRONTSIDE METALLIZED - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4620-A |
PVC COATED RUBBER MAT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4621-A |
RUBBER MAT - *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD S-M99D4690-A |
PVC PARTS, EXTERIOR - *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD SQ-M2D9507-A |
CHLOROPRENE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M3D164-A |
UNSATURATED POLYESTER (UP), MODIFIED, 50% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND (SMC) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D403-A3 |
POLYURETHANE (PUR) FOAM, ENERGY ABSORBING, 140 KPA-USE WSS-M99P29-A |
|
FORD WSB-M2D462-A1 |
THERMOPLASTIC ELASTOMER, CHLORINATED ETHYLENE [TE(PE-C)], 60 A HARDNESS, EXTERIOR ONLY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D477-A |
THERMOPLASTIC ELASTOMER MOLDING COMPOUND, EXTERIOR, PVC AND NITRILE RUBBER MOLECULAR BLEND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D678-A |
POLYAMIDE (PA) 66, 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D677-A |
|
FORD WSB-M4D713-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) POST INDUSTRIAL REPROCESSED, MINERAL FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D747-A |
POLYPHENYLENE ETHER (PPE), MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D780-A2 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65 DUROMETER A HARDNESS MOLDING COMPOUND, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D780-A |
|
FORD WSB-M4D816-A |
POLYCARBONATE + ABS BLEND (PC+ABS), MEDIUM IMPACT, VERY HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D824-A |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS) FOAM, RIGID ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSB-M4D844-A11 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPUND |
|
FORD WSB-M4D853-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), IMPACT MODIFIED, 20 % MINERAL FILLED MOLDING COMPOUND |
|
FORD WSB-M4D854-A2 |
POLYPROPYLENE (PP), 40 % GLASS FIBER REINFORCED REMANUFACTURED COMPOUND |
|
FORD WSB-M4D900-A |
POLYPHENYLENE SULFIDE (PPS), 45% MINERAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D909-A1 |
POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS), CALENDERED SHEET, VACUUM FORMABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D914-A2 |
POLYCYCLOHEXYLENE DIMETHYLENE TEREPHTHALATE (PCT), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D929-A1 |
POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M99D63-A2 |
POLYPROPYLENE (PP) FLOOR MAT, GRAINED, SHAPED-Shown on WSB-M99D63-A1 |
|
FORD WSD-M2D379-A6 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 76 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A6 |
|
FORD WSD-M2D382-A1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 89 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A1 |
|
FORD WSD-M2D384-A1 |
THERMOPLASTIC POLYESTER ETHER ELASTOMER (TEEE), 90 DUROMETER A HARDNESS, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D401-A4 |
O-RING, EPICHLOROHYDRIN RUBBER (ECO) 65 IRHD, COMPRESSIVE STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D405-A3 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 80 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D405-A1 |
|
FORD WSD-M2D437-A |
POLYURETHANE (PUR) FOAM, MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D13-A |
HOSE, ETHYLENE/ACRYLIC (AEM) RUBBER REINFORCED - AUTOMATIC TRANSMISSION FLUID AND ENGINE OIL RESISTANT |
|
FORD WSD-M96D20-A |
TUBE, PVC/NITRILE (PVC/NBR) RUBBER-UNREINFORCED, OXYGENATED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A4 |
WEATHERSTRIP/WINDLACE CO-EXTRUSION, ETHYLENE-PROPYLENE (EPDM) FOAM/POLYVINYL CHLORIDE (PVC) ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSD-M96D21-A3 |
|
FORD WSD-M96D30-A |
HOSE, ETHYLENE/ACRYLIC (AEM) RUBBER REINFORCED, LOW PRESSURE, ENGINE OIL RESISTANT, 75 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D468-A1 |
TUBING, VACUUM, FLEX FUEL, OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A5 |
HOSE, EPDM RUBBER, META-ARAMID OR MODIFIED PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO-CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS, HIGH PRESSURE RESISTANCE ***TO BE USED WITH FOR WSS-M99P1111-A***-Shown on WSE-M96D34-A1 |
|
FORD WSF-M3D167-A |
UNSATURATED POLYESTER (UP), 24% GLASS FIBER WSF-M3D167-A REINFORCED, HIGH HEAT RESISTANT COMPRESSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D691-A |
POLYAMIDE (PA) 66, 35% LONG GLASS FIBER REINFORCED, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSB-M4D678-A |
|
FORD WSF-M4D728-A2 |
STYRENE/MALEIC ANHYDRIDE (SMA) COPOLYMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D785-A3 |
ABS + POLYCARBONATE BLEND (ABS+PC), 12 % TIO2 FILLED MOLDING COMPOUND |
|
FORD WSF-M4D803-A3 |
POLYPHENYLENE SULFIDE (PPS), 57% GLASS FIBER/ MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D881-A |
ABS MOLDING COMPOUND, CLEAR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D907-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D389-A |
POLYURETHANE (PUR) FOAM, OPEN CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D398-A |
POLYURETHANE (PUR) FOAM, MOLDED, INTEGRAL SKIN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D400-A |
POLYURETHANE (PUR) FOAM, MOLDED, HOT CURED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D402-A2 |
POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M2D402-A1; USE WSB-M2D402-A3 |
|
FORD WSK-M2D403-A2 |
POLYURETHANE (PUR) FOAM, MOLDED, LOW DENSITY, ENERGY ABSORBING ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M99P29-A |
|
FORD WSK-M2D408-A |
POLYURETHANE (PUR) FOAM, MOLDED, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D564-A |
POLYAMIDE (PA) 66, MOLDING COMPOUND - SELF EXTINGUISHING (SE) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D631-A |
ABS MOLDING COMPOUND, HIGH COLD IMPACT INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D635-A4 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 43 - 55 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D635-A1 |
|
FORD WSK-M4D643-A2 |
POLYPROPYLENE (PP), HOMOPOLYMER 40% MINERAL FILLED, MELT FLOW RATE 1 - 3.5 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D643-A1 |
|
FORD WSK-M4D656-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, HIGH IMPACT STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D661-A |
PVC/NBR MOLDING COMPOUND, FLEXIBLE, EXTERIOR |
|
FORD WSK-M4D676-A2 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 55 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A3 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 60 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D700-A |
POLYAMIDE (PA) 11 FLEXIBLE, HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND |
|
FORD WSK-M4D715-A |
POLYAMIDE (PA) 46, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D722-A |
ABS, 16% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D737-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), MODIFIED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D741-A3 |
POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D741-A2 |
|
FORD WSK-M4D742-A |
POLYAMIDE (PA) 6, EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D743-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 40% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSB-M4D678-A |
|
FORD WSK-M4D748-A |
ACETAL (POM) COPOLYMER, MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D758-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D759-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D759-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D764-A |
POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL, 200 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D777-A7 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D779-A2 |
POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D788-A3 |
POLYPROPYLENE (PP) COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D788-A1 |
|
FORD WSK-M4D791-A3 |
ABS + POLYCARBONATE (ABS+PC) BLEND, MEDIUM HEAT RESISTANT, IMPROVED LOW TEMPERATURE IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D797-A |
POLYCARBONATE (PC), 22% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D808-A |
POLYPHENYLENE SULFIDE (PPS), 45% GLASS FIBER REINFORCED, SELF EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D811-A |
POLYAMIDE (PA) 46, HEAT STABILIZED, OIL IMPREGNATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D877-A |
POLYAMIDE 66 (PA66), 20% ARAMID FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D653-A |
|
FORD WSK-M4D892-A1 |
POLYAMIDE 12 (PA12), HEAT STABILIZED, 20 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D906-A1 |
ABS, HIGH HEAT RESISTANT EXTRUSION MOLDING COMPOUND-Shown on WSK-M4D905-A1 |
|
FORD WSK-M4D913-A |
STYRENE/ACRYLONITRILE (SAN), TRANSPARENT, ANTISTATIC MODIFIED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M96D28-A |
LAMINATE, POLYURETHANE (PUR) FOAM/POLYVINYL CHLORIDE (PVC) FILM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M96D28-A2 |
LAMINATE, POLYURETHANE (PUR) FOAM PE-EXPANDED SHEETING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D430-A |
FLUOROELASTOMER (FKM) OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D442-A |
FLUOROELASTOMER (FKM), OIL SEAL, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D224-B1 |
POLYURETHANE FOAM, OPEN CELL, RETICULATED *** TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D241-A2 |
TUBING, ECO, EPICHLOROHYDRIN – FUEL AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-(Formerly ESE-M2D241-A2) |
|
FORD WSS-M2D376-A2 |
SILICONE RUBBER ENGINE COOLANT AND COMPRESSION STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D381-B1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED EXTERIOR WEATHERABLE 84 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D378-B1 |
|
FORD WSS-M2D452-A4 |
THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D463-A2 |
HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) SUPERIOR COMPRESSION SET, REGRIGERANT AND OIL RESISTANT O-RINGS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSH-M2D463-A |
|
FORD WSS-M2D492-A1 |
STYRENE BUTADIENE RUBBER (SBR), EXTRUSION AND/OR COMPRESSION MOLDING, POST CONSUMER RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D494-A1 |
POLYURETHANE (PUR) FOAM, SEMI-STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D500-A2 |
POLYURETHANE FOAM, CLOSED CELL, HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D500-A1 |
|
FORD WSS-M2D510-A4 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D595-A2 |
POLYAMIDE 6 (PA6), 40% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D649-A2 |
POLYETHYLENE (PE) FOAM, CHEMICALLY CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D713-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 9 % GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D713-A6 AND WSS-M4D713-A8 |
|
FORD WSS-M4D719-A2 |
POLYAMIDE (PA) 66, 38% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, 25% POST CONSUMER MINERAL FILLED NYLON ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D719-A |
|
FORD WSS-M4D719-A3 |
POLYAMIDE (PA) 66, 40% MINERAL REINFORCED MOLDING COMPOUND, HEAT STABILIZED, 25% POST CONSUMER CONTENT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D823-A2 |
POLYAMIDE 66 (PA66), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D861-A3 |
POLYPHTHALAMIDE (PPA), 33% GLASS FIBER REINFORCED, COOLING AGENT RESISTANT, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D891-A3 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND, HIGH IMPACT AND HIGHER FLOW ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D908-A2 |
ACRYLONITRILE BUTADIENE STYRENE (ABS), HEAT RESISTANT, POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D908-A |
|
FORD WSS-M4D926-A2 |
POLYCARBONATE (PC), IMPACT MODIFIED, 25 % MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D936-A1 |
POLYPROPYLENE (PP) COPOLYMER, 30 % GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSS-M4D947-A1 |
POLYAMIDE 66 (PA66), 30 % GLASS FIBER + 15 % PTFE POWDER FILLED IMPACT MODIFIED MOLDING COMPOUND |
|
FORD WSS-M4D959-A |
POLYPROPYLENE (PP), HOMOPOLYMER 20% CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D959-A2 |
POLYPROPLYENE (PP), HOMOPOLYMER 30% CALCIUM CARBONATE FILLED, HEAT STABILIZED, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D964-A3 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D973-A |
POLYAMIDE (PA6/66) 6/66 COPOLYMER, HEAT STABILIZED 13% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D653-A |
|
FORD WSS-M4D975-A |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND AIRBAG COVER, 87 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D976-A |
POLYAMIDE 6 + POLYPROPYLENE BLEND (PA6 + PP), 8% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D988-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, LOW CLTE, FOR MOLDED-IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B1 |
|
FORD WSS-M4D990-A |
POLYPROPYLENE HOMOPOYLMER + POLYAMIDE 6 BLEND (PP+PA6) UV STABILIZED, THERMOPLASTIC MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D44-A |
HOSE, LOW PRESSURE ENGINE OIL COOLER **TO BE USED WITH FORD WSS-M99P111-A** |
|
FORD WSS-M98D33-A1 |
TUBE, POLYAMIDE 12 (PA12) COVER, TIE LAYER, ETFE TUBE, LOW PRESSURE, FUEL/ALCOHOL RESISTANT, NON-CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A4 |
TUBE, POLYAMIDE 12 (PA12), PVDF BARRIER, CONDUCTIVE POLYAMIDE 12 TUBE, HIGH PRESSURE, FUEL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A5 |
TUBE, POLYAMIDE 12 (PA12) COVER, ETFE TUBE, LOW PRESSURE, FUEL/ALCOHOL RESISTANT, NON-CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A6 |
TUBE, POLYAMIDE 12 (PA12) COVER, ETFE TUBE, ETFE TUBE, HIGH PRESSURE, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D191-B |
HOSE, EPDM - HEATER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D223-A |
RUBBER, ENGINE MOUNTS - INSULATOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D313-A3 |
EPDM RUBBER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D321-A |
RUBBER, POLYPROPYLENE OXIDE - CALCIUM CARBONATE AND TITANIUM DIOXIDE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D324-A |
RUBBER, PVC/NBR BLEND - FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D50-A |
HOSE, REINFORCED RUBBER - FUEL LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D52-A |
HOSE, HIGH TEMPERATURE - LOW PRESSURE - OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D185-A |
NYLON, 20% GLASS FIBER REINFORCED |
|
FORD ESA-M4D333-A |
POLYVINYL CHLORIDE, TRANSPARENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D370-A |
POLYTETRAFLUOROETHYLENE, 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D420-A |
ACETAL, HOMOPOLYMER-20% TETRAFLUOROETHYLENE (TFE) FILLED |
|
FORD ESA-M4D420-B |
ACETAL, HOMOPOLYMER-20% TETRAFLUOROETHYLENE (TFE) FILLED,-Shown on ESA-M4D420-A |
|
FORD ESA-M4D429-A1 |
POLYAMIDE (PA) 6, MINERAL FILLED - ELECTROPLATING GRADE - EXTERIOR |
|
FORD ESA-M4D429-A2 |
POLYAMIDE (PA) 6, MINERAL FILLED - EXTERIOR - PAINTED-Shown on ESA-M4D429-A1 |
|
FORD ESA-M4D429-A3 |
POLYAMIDE (PA) 6, MINERAL FILLED - EXTERIOR - PAINTED-Shown on ESA-M4D429-A1 |
|
FORD ESA-M4D429-A4 |
NYLON 6, 34% MINERAL FILLED - HEAT STABILIZED - HIGH IMPACT, EXTERIOR PAINTED |
|
FORD ESA-M4D434-A1 |
STYRENE MALEIC ANHYDRIDE TERPOLYMER (SMA), MODIFIED MOLDING COMPOUND, GENERAL PURPOSE |
|
FORD ESB-M2D221-B |
POLYURETHANE FOAM, HIGH RESILIENCE - 34 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D221-A |
|
FORD ESB-M2D221-D |
POLYURETHANE FOAM, HIGH LOAD BEARING - 42 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D226-A1 |
EPDM RUBBER, EXTERIOR - COLOR PIGMENTED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D263-A3 |
POLYURETHANE, MICROCELLULAR ELASTOMER - LIQUID REACTION MOLDED (LRM) - INTERMEDIATE MODULUS - IMPROVED TEMPERATURE PERFORMANCE - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D280-A4 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D295-A |
SILICONE ELASTOMER, EXTERIOR - WEATHERABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D297-A5 |
POLYURETHANE FOAM, ACOUSTICAL - 80 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D319-A |
POLYURETHANE FOAM, ACOUSTICAL - 80 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D339-A |
EPDM ELASTOMER, SQUEEZE BULB - LUMBAR SUPPORT SYSTEM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A2 |
POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D350-A1 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED - LIQUID INJECTION MOLDING (LIM) GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D395-A |
POLYURETHANE (PUR) ELASTOMER, MICROCELLULAR, 11-12% GLASS FIBER REINFORCED, RRIM, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D105-C |
POLYESTER RESIN, GLASS FIBER REINFORCED MATCHED METAL DIE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D118-C |
PHENOLIC INJECTION MOLDING COMPOUND HEAT RESISTANT - MINERAL FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D145-A |
POLYESTER RESIN, GLASS FIBER REINFORCED, LOW SHRINKAGE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D137-B |
POLYVINYL CHLORIDE PLASTISOL, CAST ON STEEL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D147-A |
POLYETHYLENE (PE), LINEAR - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D152-A |
POLYETHYLENE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D151-A |
|
FORD ESB-M4D156-A |
POLYETHYLENE (PE), SHEET - BLACK ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D169-A2 |
ACETAL RESIN, 15% PTFE FILLED |
|
FORD ESB-M4D195-B |
POLYVINYL CHLORIDE, DIELECTRIC BONDING GRADE, CARPET INLAY |
|
FORD ESB-M4D263-C2 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - GENERAL PURPOSE GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D297-A2 |
ABS, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D297-A1 |
|
FORD ESB-M4D334-A |
POLYPROPYLENE COPOLYMER, SELF-EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD ESB-M4D353-A2 |
NYLON (TYPE 66), MINERAL FILLED - HIGH MODULUS GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D353-A1; |
|
FORD ESB-M4D353-A4 |
NYLON (TYPE 66), MINERAL FILLED - EXTERIOR, PAINTED BODY COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D353-A1; |
|
FORD ESB-M4D354-A2 |
POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - INTERNALLY LUBRICATED |
|
FORD ESB-M4D365-A2 |
POLYPROPYLENE, 40% CALCIUM CARBONATE FILLED - EXTRUSION GRADE - STAMPABLE, DISCONTINUED, USE DELTA ES- E97B1011014AA & ESB- M4D365-B2 |
|
FORD ESB-M4D365-B2 |
POLYPROPYLENE, 40% CALCIUM CARBONATE FILLED - EXTRUSION GRADE - STAMPABLE-Shown on ESB-M4D365-A2 |
|
FORD ESB-M4D366-A1 |
NYLON, (TYPE 6), 40% GLASS REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D400-A |
LAMINATE RIGID POLYSTYRENE, FOAM/FILM- THERMOFORMABLE, HEADLINING SUBSTRATE |
|
FORD ESB-M4D404-A |
THERMOPLASTIC POLYOLEFIN, ELASTOMER AND GLASS FIBER MODIFIED, MOLDING COMPOUND, INTERIOR GRADE, COLOR PIGMENTED, UV STABILIZED |
|
FORD ESB-M4D436-A3 |
POLYETHERIMIDE (PEI), 30% GLASS FIBER REINFORCED, INJECTION MOLDING COMPOUND |
|
FORD ESB-M4D442-A |
POLYCARBONATE, POLYBUTYLENE TEREPHTHALATE MOLDING COMPOUND |
|
FORD ESB-M4D489-A3 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED |
|
FORD ESB-M4D4-A |
ACETATE - BUTYRATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D570-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), EXTRUSION GRADE, EXTERIOR, UV STABILIZED***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D570-A1; Use WSS-M2D382-B1 |
|
FORD ESB-M98D15-A1 |
LAMINATE, POLYVINYL CHLORIDE SKIN, POLYVINYL CHLORIDE FOAM, POLYVINYL CHLORIDE SKIN, RIGID SUBSTRATE, FORMED TRIM ASSEMBLY |
|
FORD ESB-M98D17-A1 |
LAMINATE, METALLIZED POLYESTER/PVC **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD ESB-M99D35-A |
POLYVINYL CHLORIDE, REPROCESSED FLOOR MAT |
|
FORD ESB-M99D42-A |
POLYPROPYLENE, NYLON FLOCKED SURFACE *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD ESB-M99D43-B |
POLYPROPYLENE, 50% WOOD FIBER FILLED - EXTRUDED COMPOSITE***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M99D43-A |
|
FORD ESB-M99D45-A |
POLYURETHANE FILM, WATER BARRIER***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D55-A2 |
TUBING, POLYOLEFIN - HEAT SHRINKABLE - DUAL WALL - ADHESIVELY LINES - FLEXIBLE - FLAME RETARDED***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M99D55-A1 |
|
FORD ESE-M2D164-A |
HOSE, EPDM RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D235-D2 |
BELT, POSITIVE DRIVE - HIGH TEMPERATURE POLYCHLOROPRENE - GLASS FIBER REINFORCED, NYLON FABRIC FACING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D240-A |
FLUOROELASTOMER DIAPHRAGM, 70 DUROMETER |
|
FORD ESE-M2D289-A |
TUBING, CHLORINATED POLYETHYLENE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D345-A2 |
HOSE, SILICONE - HIGH TEMPERATURE - COOLANT RESISTANT - HIGH BURST ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESE-M2D345-A1 * |
|
FORD ESE-M2D352-A |
TUBING, RUBBER - LARGE DIAMETER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D363-A |
FLUOROELASTOMER (FKM), HIGH TEMPERATURE RESISTANT - GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D364-A |
SILICONE RUBBER, HIGH ELONGATION - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D53-A2 |
FLUOROELASTOMER, OIL SEAL - VALVE STEM - HIGH HEAT - ABRASION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M4D341-A2 |
POLYESTER, THERMOPLASTIC - 30% GLASS REINFORCED MINERAL FILLED-Shown on ESE-M4D341-A1 |
|
FORD ESF-M2D129-A |
FLUOROSILICONE RUBBER, 50 DUROMETER |
|
FORD ESF-M3D78-A |
PHENOLIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D159-A |
NYLON (TYPE 66), GLASS FIBER REINFORCED - MOLYBDENUM DISULFIDE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D164-A |
POLYURETHANE (PUR) FOAM, OPEN CELL, FILTER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D27-A |
TETRAFLUOROETHYLENE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D298-A |
POLYPROPYLENE MOLDING COMPOUND, EXTRA HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M4D938-A1 |
|
FORD ESF-M4D354-A6 |
POLYBUTYLENE TEREPHTHALATE, 17% GLASS FIBER REINFORCED - SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D405-B |
POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD ESF-M4D405-D2 |
POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND-Shown on ESF-M4D405-B |
|
FORD ESF-M96D22-A |
HOSE, REINFORCED, FLUOROELASTOMER (FKM) RUBBER, OXYGENATED AND OXIDIZED FUEL RESISTANT, IN-TANK HIGH PRESSURE FUEL LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M99D48-A |
POLYPROPYLENE/POLYALLOMER FIBERS, EXTRUDED - FUEL RESISTANT |
|
FORD ESH-M2D190-B1 |
SEAL, RADIATOR CAP - NBR - ETHYLENE GLYCOL RESISTANT LATHE CUT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D689-A2 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 85 A HARDNESS, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D689-A6 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 65 A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D689-A1 |
|
FORD WSK-M4D697-A3 |
ABS + POLYCARBONATE BLEND (ABS+PC), HIGH IMPACT STRENGTH, HIGH HEAT, MOLDING COMPOUND, EXTERIOR-REPLACES ESK-M4D452-A1/A2 |
|
FORD WSK-M4D699-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 30% CALCIUM CARBONATE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D911-B |
|
FORD WSK-M4D704-A2 |
POLYAMIDE 66 (PA66), 40% MINERAL FILLED IMPROVED IMPACT STRENGTH MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D705-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D666-A |
|
FORD WSK-M4D715-A2 |
POLYAMIDE (PA) 46, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D724-A1 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D724-A2 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED, 20% GLASS FIBER/10% ACRYLIC REGRIND REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D749-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D753-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), MODIFIED 20 % GLASS FIBER MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D754-A |
POLYAMIDE (PA) 6, HEAT STABILIZED, 15% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D755-A2 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 40 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D755-A1 |
|
FORD WSK-M4D762-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED MOLDING COMPOUND, HIGH IMPACT, PAINTABLE |
|
FORD WSK-M4D769-A |
ABS + POLYCARBONATE BLEND (ABS+PC) MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D788-A2 |
POLYPROPYLENE (PP) COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D788-A1 |
|
FORD WSK-M4D801-A |
POLYAMIDE (PA) 12, RIGID, HEAT STABILIZED, 12% GRAPHITE FILLED MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D802-A |
POLYAMIDE (PA) 12, SEMI FLEXIBLE, HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D804-A |
POLYAMIDE (PA) 6, HEAT STABILIZED, IMPACT MODIFIED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D819-A |
POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D830-A |
POLYETHYLENE TEREPHTHALATE (PET) FILM, TRANSPARENT ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D840-A2 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 11 - 16, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A **-Shown on WSK-M4D840-A1 |
|
FORD WSK-M4D840-A3 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 29 - 35, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A **-Shown on WSK-M4D840-A1 |
|
FORD WSK-M4D864-A3 |
ABS, GENERAL PURPOSE, RECOMPOUNDED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D876-A3 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D876-A1 |
|
FORD WSK-M4D890-A2 |
POLYAMIDE 6-3-T (PA6-3-T), AMORPHOUS MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M98D24-A1 |
FLUOROPOLYMER (PVDF) ALLOY FILM, EXTERIOR **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSK-M98D26-A |
LAMINATE, POLYETHYLENE (PE) FOAM, RECYCLED/POLYETHYLENE (PE) SHEET **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSL-M96D33-A3 |
HOSE, NON-REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M99D64-A |
POLYTETRAFLUOROETHYLENE (PTFE) FILM, EXPANDED, FUEL/ALCOHOL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D373-A2 |
ETHYLENE/ACRYLIC (AEM) RUBBER LOW COMPRESSION SET, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D418-A3 |
SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, LONG LIFE GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D496-A10 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D506-A |
THERMOPLASTIC ELASTOMER (TES + TPU) STYRENE BLOCK COPOLYMER 65 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D507-A |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 45 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D510-A6 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M4D309-C |
POLYCARBONATE (PC), 10 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D365-B3 |
POLYPROPYLENE, 40% CALCIUM CARBONATE FILLED EXTRUSION GRADE - STAMPABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D429-C3 |
NYLON (PA) 6, MOLDING COMPOUND, 34% MINERAL FILLED, EXTERIOR, PAINTED - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D550-A7 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, PAINTABLE OR MOLDED-IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D556-A7 |
POLYPROPYLENE PHOSPHORESCENT PIGMENT FILLED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D663-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED 33% GLASS FIBER REINFORCED, LASER MARKABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D682-A5 |
ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), VERY HIGH HEAT RESISTANT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D822-A4 |
POLYAMIDE (PA) 6, HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED, MINIMUM 25% PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D840-A4 |
ACETAL (POM) COPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 1.8 - 4.0, INTERIOR ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSS-M4D981-A2 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND, FOR PAINTED AIRBAG COVERS *** TO BE USED WITH FORD WSS-M99P1111-A ***-Shown on WSS-M4D981-A |
|
FORD WSS-M4D986-A |
POLYAMIDE (PA6)- 45% GLASS FIBER REINFORCED, MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D989-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 17% MINERAL FILLED CONDUCTIVE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D991-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, LOW CLTE, FOR MOLDED IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B1 |
|
FORD WSS-M96D25-A6 |
HOSE, AIR CONDITIONING REFRIGERANT (POLYAMIDE 6 BARRIER) RESISTANT, MEDIUM PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D33-B2 |
HOSE, REINFORCED RUBBER, DIESEL FUEL RESISTANT, CONDUCTIVE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D4-B |
HOSE, HYDRAULIC BRAKE ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A13 |
TUBING, POLYAMIDE 6/12 COVER, ETFE INNER TUBE NON-CONDUCTIVE, LOW PRESSURE VAPOR, LOW PERMEATING FUEL LINE **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSS-M98D33-A14 |
TUBING, POLYAMIDE 6/12 COVER, ETFE INNER TUBE CONDUCTIVE, HIGH PRESSURE LIQUID, LOW PERMEATING FUEL LINE **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSZ-M99D58-A |
FILM, TRANSPARENT POLYESTER OVERLAY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D287-A |
POLYURETHANE ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D106-A |
POLYVINYL CHLORIDE COPOLYMER, SOFT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D202-A |
POLYPROPYLENE, FLAME RETARDANT ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M4D638-B |
|
FORD ESA-M4D331-A |
NYLON (TYPE 6), HEAT STABILIZED - FLEXIBLE - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D374-A |
TUBING, NYLON (TYPE 11 AND TYPE 12) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D465-A2 |
TUBING, PTFE - POLYPHENYLENE SULFIDE FILLED-Shown on ESA-M4D465-A1 |
|
FORD ESA-M99D46-A |
COMPOSITE, NITRILE/ PHENOLIC POLYESTER FIBERS - PTFE IMPREGNATED - STEEL BACKED - BEARING***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D221-C |
POLYURETHANE FOAM, HIGH RESILIENCE - 27 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D221-A; |
|
FORD ESB-M2D246-A1 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, EXTERIOR PAINTABLE - LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D280-A3 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D296-A |
THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER - INJECTION AND EXTRUSION COMPOUND - ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A1 |
POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D362-A |
POLYURETHANE FOAM, MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D105-B |
POLYESTER RESIN, GLASS FIBER REINFORCED MATCHED METAL DIE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D139-A |
EPOXY, TWO-COMPONENT - THERMALLY CONDUCTIVE WHEN USED WITH SILICA SAND - POTTING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D103-A |
TUBING, POLYVINYL CHLORIDE - EXTRUDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D128-A |
POLYETHYLENE, FOAM - PRESSURE SENSITIVE ADHESIVE BACKED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D262-C |
POLYURETHANE FOAM, HIGH AND MEDIUM DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD ESB-M4D297-A1 |
ABS, 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D330-A2 |
IONOMER (ETHYLENE) MOLDING COMPOUND, PIGMENTED - ZINC TYPE - EXTERIOR GRADE - PAINTABLE-Shown on ESB-M4D330-A1 |
|
FORD ESB-M4D353-A1 |
NYLON (TYPE 66), MINERAL FILLED - HIGH IMPACT GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M98D10-A1 |
LAMINATE, FLUOROCARBON FILM/METAL, EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M98D14-A |
LAMINATE, POLYVINYL CHLORIDE FOAM POLYVINYL ÑESB-M98D14-A SKIN - RIGID SUBSTRATE FORMED TRIM ASSEMBLY |
|
FORD ESB-M99D50-A |
ETHYLENE METHYL ACRYLATE COPOLYMER (E/MA) FILM, CLEAR***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D53-A |
TUBING, FLUOROPOLYMER - HIGH HEAT RESISTANT***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D266-A |
EPDM RUBBER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D374-A |
HYDROGENATED NITRILE (HSN) RUBBER, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M4D428-A |
NYLON (TYPE 66) COPOLYMER, HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D648-A |
|
FORD ESE-M99D40-A |
PLASTIC, MAGNETIC - INJECTION MOLDED***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M2D93-A |
FLUOROCARBON ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M3D69-A |
POLYESTER FILM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D217-A |
POLYSULFONE |
|
FORD ESF-M4D432-A |
POLYBUTYLENE TEREPHTHALATE, 40% GLASS/MINERAL REINFORCED |
|
FORD ESF-M4D511-A |
POLYAMIDE (PA) 66, PLASTICIZED - HIGH TEMPERATURE RESISTANT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D648-A |
|
FORD ESF-M4D602-A |
POLYPHENYLENE ETHER (PPE) , HIGH IMPACT POLYSTYRENE BLEND, 30% GLASS FIBER REINFORCED,, INJECTION MOLDING COMPOUND, ELECTRICAL GRADE |
|
FORD ESH-M4D380-B |
POLYURETHANE FOAM, LOW DENSITY - SKINNED - FOAM IN PLACE - WITH BIOCIDE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESH-M4D380-A |
|
FORD ESH-M4D560-A |
POLYPROPYLENE (PP) INJECTION MOLDING COMPOUND, 36% GLASS FIBER AND MICA FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D365-A |
FLUORO ELASTOMER (FKM), ROTATING SHAFT OIL SEAL - LIP TYPE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D371-A |
POLYURETHANE (PUR) FOAM - MOULDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M4D469-A |
PVC MOLDING COMPOUND, COLD AND HEAT RESISTANT |
|
FORD ESW-M2D230-A4 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESW-M2D230-A1 |
|
FORD SA-M4D9605-A |
PVC MOLDING COMPOUND, FUEL RESISTANT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SA-M4D9945-A |
THERMOPLASTIC POLYOLEFINE ELASTOMER, SEMI RIGID |
|
FORD S-M4D4509-A |
POLYURETHANE FOAM - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4548-A |
PLASTICS, INTERIOR, FRONTSIDE METALLIZED - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4620-A |
PVC COATED RUBBER MAT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M99D4621-A |
RUBBER MAT - *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD S-M99D4690-A |
PVC PARTS, EXTERIOR - *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD SQ-M2D9507-A |
CHLOROPRENE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M3D164-A |
UNSATURATED POLYESTER (UP), MODIFIED, 50% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND (SMC) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D403-A3 |
POLYURETHANE (PUR) FOAM, ENERGY ABSORBING, 140 KPA-USE WSS-M99P29-A |
|
FORD WSB-M2D462-A1 |
THERMOPLASTIC ELASTOMER, CHLORINATED ETHYLENE [TE(PE-C)], 60 A HARDNESS, EXTERIOR ONLY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D477-A |
THERMOPLASTIC ELASTOMER MOLDING COMPOUND, EXTERIOR, PVC AND NITRILE RUBBER MOLECULAR BLEND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D678-A |
POLYAMIDE (PA) 66, 40% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D677-A |
|
FORD WSB-M4D713-A3 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) POST INDUSTRIAL REPROCESSED, MINERAL FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D747-A |
POLYPHENYLENE ETHER (PPE), MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D780-A2 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65 DUROMETER A HARDNESS MOLDING COMPOUND, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D780-A |
|
FORD WSB-M4D816-A |
POLYCARBONATE + ABS BLEND (PC+ABS), MEDIUM IMPACT, VERY HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D824-A |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS) FOAM, RIGID ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSB-M4D844-A11 |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPUND |
|
FORD WSB-M4D853-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), IMPACT MODIFIED, 20 % MINERAL FILLED MOLDING COMPOUND |
|
FORD WSB-M4D854-A2 |
POLYPROPYLENE (PP), 40 % GLASS FIBER REINFORCED REMANUFACTURED COMPOUND |
|
FORD WSB-M4D900-A |
POLYPHENYLENE SULFIDE (PPS), 45% MINERAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D909-A1 |
POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS), CALENDERED SHEET, VACUUM FORMABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D914-A2 |
POLYCYCLOHEXYLENE DIMETHYLENE TEREPHTHALATE (PCT), 15% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D929-A1 |
POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M99D63-A2 |
POLYPROPYLENE (PP) FLOOR MAT, GRAINED, SHAPED-Shown on WSB-M99D63-A1 |
|
FORD WSD-M2D379-A6 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED 76 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A6 |
|
FORD WSD-M2D382-A1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 89 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D378-A1 |
|
FORD WSD-M2D384-A1 |
THERMOPLASTIC POLYESTER ETHER ELASTOMER (TEEE), 90 DUROMETER A HARDNESS, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D401-A4 |
O-RING, EPICHLOROHYDRIN RUBBER (ECO) 65 IRHD, COMPRESSIVE STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D405-A3 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 80 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D405-A1 |
|
FORD WSD-M2D437-A |
POLYURETHANE (PUR) FOAM, MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D13-A |
HOSE, ETHYLENE/ACRYLIC (AEM) RUBBER REINFORCED - AUTOMATIC TRANSMISSION FLUID AND ENGINE OIL RESISTANT |
|
FORD WSD-M96D20-A |
TUBE, PVC/NITRILE (PVC/NBR) RUBBER-UNREINFORCED, OXYGENATED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A4 |
WEATHERSTRIP/WINDLACE CO-EXTRUSION, ETHYLENE-PROPYLENE (EPDM) FOAM/POLYVINYL CHLORIDE (PVC) ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSD-M96D21-A3 |
|
FORD WSD-M96D30-A |
HOSE, ETHYLENE/ACRYLIC (AEM) RUBBER REINFORCED, LOW PRESSURE, ENGINE OIL RESISTANT, 75 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D468-A1 |
TUBING, VACUUM, FLEX FUEL, OXIDIZED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D34-A5 |
HOSE, EPDM RUBBER, META-ARAMID OR MODIFIED PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO-CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS, HIGH PRESSURE RESISTANCE ***TO BE USED WITH FOR WSS-M99P1111-A***-Shown on WSE-M96D34-A1 |
|
FORD WSF-M3D167-A |
UNSATURATED POLYESTER (UP), 24% GLASS FIBER WSF-M3D167-A REINFORCED, HIGH HEAT RESISTANT COMPRESSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D691-A |
POLYAMIDE (PA) 66, 35% LONG GLASS FIBER REINFORCED, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSB-M4D678-A |
|
FORD WSF-M4D728-A2 |
STYRENE/MALEIC ANHYDRIDE (SMA) COPOLYMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D785-A3 |
ABS + POLYCARBONATE BLEND (ABS+PC), 12 % TIO2 FILLED MOLDING COMPOUND |
|
FORD WSF-M4D803-A3 |
POLYPHENYLENE SULFIDE (PPS), 57% GLASS FIBER/ MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D881-A |
ABS MOLDING COMPOUND, CLEAR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D907-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D389-A |
POLYURETHANE (PUR) FOAM, OPEN CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D398-A |
POLYURETHANE (PUR) FOAM, MOLDED, INTEGRAL SKIN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D400-A |
POLYURETHANE (PUR) FOAM, MOLDED, HOT CURED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D402-A2 |
POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M2D402-A1; USE WSB-M2D402-A3 |
|
FORD WSK-M2D403-A2 |
POLYURETHANE (PUR) FOAM, MOLDED, LOW DENSITY, ENERGY ABSORBING ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M99P29-A |
|
FORD WSK-M2D408-A |
POLYURETHANE (PUR) FOAM, MOLDED, HIGH DENSITY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D564-A |
POLYAMIDE (PA) 66, MOLDING COMPOUND - SELF EXTINGUISHING (SE) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D631-A |
ABS MOLDING COMPOUND, HIGH COLD IMPACT INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D635-A4 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 43 - 55 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D635-A1 |
|
FORD WSK-M4D643-A2 |
POLYPROPYLENE (PP), HOMOPOLYMER 40% MINERAL FILLED, MELT FLOW RATE 1 - 3.5 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D643-A1 |
|
FORD WSK-M4D656-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, HIGH IMPACT STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D661-A |
PVC/NBR MOLDING COMPOUND, FLEXIBLE, EXTERIOR |
|
FORD WSK-M4D676-A2 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 55 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A3 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 60 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D700-A |
POLYAMIDE (PA) 11 FLEXIBLE, HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND |
|
FORD WSK-M4D715-A |
POLYAMIDE (PA) 46, HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D722-A |
ABS, 16% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D737-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), MODIFIED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D741-A3 |
POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D741-A2 |
|
FORD WSK-M4D742-A |
POLYAMIDE (PA) 6, EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D743-A |
POLYAMIDE (PA) 66, HEAT STABILIZED 40% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSB-M4D678-A |
|
FORD WSK-M4D748-A |
ACETAL (POM) COPOLYMER, MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D758-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D759-A1 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D759-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 20% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D764-A |
POLYETHYLENE (PE) FOAM, CROSSLINKED, CLOSED CELL, 200 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D777-A7 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), HIGH COLD IMPACT EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D779-A2 |
POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER/MICA REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D788-A3 |
POLYPROPYLENE (PP) COPOLYMER, 40% MINERAL FILLED, COLOR PIGMENTED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D788-A1 |
|
FORD WSK-M4D791-A3 |
ABS + POLYCARBONATE (ABS+PC) BLEND, MEDIUM HEAT RESISTANT, IMPROVED LOW TEMPERATURE IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D797-A |
POLYCARBONATE (PC), 22% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D808-A |
POLYPHENYLENE SULFIDE (PPS), 45% GLASS FIBER REINFORCED, SELF EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D811-A |
POLYAMIDE (PA) 46, HEAT STABILIZED, OIL IMPREGNATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D877-A |
POLYAMIDE 66 (PA66), 20% ARAMID FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D653-A |
|
FORD WSK-M4D892-A1 |
POLYAMIDE 12 (PA12), HEAT STABILIZED, 20 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D906-A1 |
ABS, HIGH HEAT RESISTANT EXTRUSION MOLDING COMPOUND-Shown on WSK-M4D905-A1 |
|
FORD WSK-M4D913-A |
STYRENE/ACRYLONITRILE (SAN), TRANSPARENT, ANTISTATIC MODIFIED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M96D28-A |
LAMINATE, POLYURETHANE (PUR) FOAM/POLYVINYL CHLORIDE (PVC) FILM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M96D28-A2 |
LAMINATE, POLYURETHANE (PUR) FOAM PE-EXPANDED SHEETING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D430-A |
FLUOROELASTOMER (FKM) OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D442-A |
FLUOROELASTOMER (FKM), OIL SEAL, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D224-B1 |
POLYURETHANE FOAM, OPEN CELL, RETICULATED *** TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D241-A2 |
TUBING, ECO, EPICHLOROHYDRIN – FUEL AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-(Formerly ESE-M2D241-A2) |
|
FORD WSS-M2D376-A2 |
SILICONE RUBBER ENGINE COOLANT AND COMPRESSION STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D381-B1 |
THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED EXTERIOR WEATHERABLE 84 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D378-B1 |
|
FORD WSS-M2D452-A4 |
THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D463-A2 |
HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) SUPERIOR COMPRESSION SET, REGRIGERANT AND OIL RESISTANT O-RINGS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSH-M2D463-A |
|
FORD WSS-M2D492-A1 |
STYRENE BUTADIENE RUBBER (SBR), EXTRUSION AND/OR COMPRESSION MOLDING, POST CONSUMER RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D494-A1 |
POLYURETHANE (PUR) FOAM, SEMI-STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D500-A2 |
POLYURETHANE FOAM, CLOSED CELL, HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D500-A1 |
|
FORD WSS-M2D510-A4 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D595-A2 |
POLYAMIDE 6 (PA6), 40% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D649-A2 |
POLYETHYLENE (PE) FOAM, CHEMICALLY CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D713-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 9 % GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D713-A6 AND WSS-M4D713-A8 |
|
FORD WSS-M4D719-A2 |
POLYAMIDE (PA) 66, 38% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, 25% POST CONSUMER MINERAL FILLED NYLON ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D719-A |
|
FORD WSS-M4D719-A3 |
POLYAMIDE (PA) 66, 40% MINERAL REINFORCED MOLDING COMPOUND, HEAT STABILIZED, 25% POST CONSUMER CONTENT - ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D823-A2 |
POLYAMIDE 66 (PA66), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D861-A3 |
POLYPHTHALAMIDE (PPA), 33% GLASS FIBER REINFORCED, COOLING AGENT RESISTANT, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D891-A3 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND, HIGH IMPACT AND HIGHER FLOW ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D908-A2 |
ACRYLONITRILE BUTADIENE STYRENE (ABS), HEAT RESISTANT, POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D908-A |
|
FORD WSS-M4D926-A2 |
POLYCARBONATE (PC), IMPACT MODIFIED, 25 % MINIMUM RECYCLED CONTENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D936-A1 |
POLYPROPYLENE (PP) COPOLYMER, 30 % GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSS-M4D947-A1 |
POLYAMIDE 66 (PA66), 30 % GLASS FIBER + 15 % PTFE POWDER FILLED IMPACT MODIFIED MOLDING COMPOUND |
|
FORD WSS-M4D959-A |
POLYPROPYLENE (PP), HOMOPOLYMER 20% CALCIUM CARBONATE FILLED, HEAT STABILIZED, IMPACT MODIFIED MOLDING COMPOUND, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D959-A2 |
POLYPROPLYENE (PP), HOMOPOLYMER 30% CALCIUM CARBONATE FILLED, HEAT STABILIZED, 25% MIN POST CONSUMER CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D964-A3 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D973-A |
POLYAMIDE (PA6/66) 6/66 COPOLYMER, HEAT STABILIZED 13% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D653-A |
|
FORD WSS-M4D975-A |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND AIRBAG COVER, 87 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D976-A |
POLYAMIDE 6 + POLYPROPYLENE BLEND (PA6 + PP), 8% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D988-A |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, LOW CLTE, FOR MOLDED-IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D492-B1 |
|
FORD WSS-M4D990-A |
POLYPROPYLENE HOMOPOYLMER + POLYAMIDE 6 BLEND (PP+PA6) UV STABILIZED, THERMOPLASTIC MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D44-A |
HOSE, LOW PRESSURE ENGINE OIL COOLER **TO BE USED WITH FORD WSS-M99P111-A** |
|
FORD WSS-M98D33-A1 |
TUBE, POLYAMIDE 12 (PA12) COVER, TIE LAYER, ETFE TUBE, LOW PRESSURE, FUEL/ALCOHOL RESISTANT, NON-CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A4 |
TUBE, POLYAMIDE 12 (PA12), PVDF BARRIER, CONDUCTIVE POLYAMIDE 12 TUBE, HIGH PRESSURE, FUEL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A5 |
TUBE, POLYAMIDE 12 (PA12) COVER, ETFE TUBE, LOW PRESSURE, FUEL/ALCOHOL RESISTANT, NON-CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A6 |
TUBE, POLYAMIDE 12 (PA12) COVER, ETFE TUBE, ETFE TUBE, HIGH PRESSURE, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D191-B |
HOSE, EPDM - HEATER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D223-A |
RUBBER, ENGINE MOUNTS - INSULATOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D313-A3 |
EPDM RUBBER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D321-A |
RUBBER, POLYPROPYLENE OXIDE - CALCIUM CARBONATE AND TITANIUM DIOXIDE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D324-A |
RUBBER, PVC/NBR BLEND - FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D50-A |
HOSE, REINFORCED RUBBER - FUEL LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D52-A |
HOSE, HIGH TEMPERATURE - LOW PRESSURE - OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D185-A |
NYLON, 20% GLASS FIBER REINFORCED |
|
FORD ESA-M4D333-A |
POLYVINYL CHLORIDE, TRANSPARENT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D370-A |
POLYTETRAFLUOROETHYLENE, 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D420-A |
ACETAL, HOMOPOLYMER-20% TETRAFLUOROETHYLENE (TFE) FILLED |
|
FORD ESA-M4D420-B |
ACETAL, HOMOPOLYMER-20% TETRAFLUOROETHYLENE (TFE) FILLED,-Shown on ESA-M4D420-A |
|
FORD ESA-M4D429-A1 |
POLYAMIDE (PA) 6, MINERAL FILLED - ELECTROPLATING GRADE - EXTERIOR |
|
FORD ESA-M4D429-A2 |
POLYAMIDE (PA) 6, MINERAL FILLED - EXTERIOR - PAINTED-Shown on ESA-M4D429-A1 |
|
FORD ESA-M4D429-A3 |
POLYAMIDE (PA) 6, MINERAL FILLED - EXTERIOR - PAINTED-Shown on ESA-M4D429-A1 |
|
FORD ESA-M4D429-A4 |
NYLON 6, 34% MINERAL FILLED - HEAT STABILIZED - HIGH IMPACT, EXTERIOR PAINTED |
|
FORD ESA-M4D434-A1 |
STYRENE MALEIC ANHYDRIDE TERPOLYMER (SMA), MODIFIED MOLDING COMPOUND, GENERAL PURPOSE |
|
FORD ESB-M2D221-B |
POLYURETHANE FOAM, HIGH RESILIENCE - 34 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M2D221-A |
|
FORD ESB-M2D221-D |
POLYURETHANE FOAM, HIGH LOAD BEARING - 42 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D226-A1 |
EPDM RUBBER, EXTERIOR - COLOR PIGMENTED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D263-A3 |
POLYURETHANE, MICROCELLULAR ELASTOMER - LIQUID REACTION MOLDED (LRM) - INTERMEDIATE MODULUS - IMPROVED TEMPERATURE PERFORMANCE - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D280-A4 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D295-A |
SILICONE ELASTOMER, EXTERIOR - WEATHERABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D297-A5 |
POLYURETHANE FOAM, ACOUSTICAL - 80 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D319-A |
POLYURETHANE FOAM, ACOUSTICAL - 80 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D339-A |
EPDM ELASTOMER, SQUEEZE BULB - LUMBAR SUPPORT SYSTEM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D348-A2 |
POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D350-A1 |
SILICONE ELASTOMER, INHERENTLY LUBRICATED - LIQUID INJECTION MOLDING (LIM) GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D395-A |
POLYURETHANE (PUR) ELASTOMER, MICROCELLULAR, 11-12% GLASS FIBER REINFORCED, RRIM, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D105-C |
POLYESTER RESIN, GLASS FIBER REINFORCED MATCHED METAL DIE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D118-C |
PHENOLIC INJECTION MOLDING COMPOUND HEAT RESISTANT - MINERAL FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D145-A |
POLYESTER RESIN, GLASS FIBER REINFORCED, LOW SHRINKAGE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D137-B |
POLYVINYL CHLORIDE PLASTISOL, CAST ON STEEL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D147-A |
POLYETHYLENE (PE), LINEAR - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D152-A |
POLYETHYLENE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D151-A |
|
FORD ESB-M4D156-A |
POLYETHYLENE (PE), SHEET - BLACK ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D169-A2 |
ACETAL RESIN, 15% PTFE FILLED |
|
FORD ESB-M4D195-B |
POLYVINYL CHLORIDE, DIELECTRIC BONDING GRADE, CARPET INLAY |
|
FORD ESB-M4D263-C2 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - GENERAL PURPOSE GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D297-A2 |
ABS, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D297-A1 |
|
FORD ESB-M4D334-A |
POLYPROPYLENE COPOLYMER, SELF-EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD ESB-M4D353-A2 |
NYLON (TYPE 66), MINERAL FILLED - HIGH MODULUS GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D353-A1; |
|
FORD ESB-M4D353-A4 |
NYLON (TYPE 66), MINERAL FILLED - EXTERIOR, PAINTED BODY COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D353-A1; |
|
FORD ESB-M4D354-A2 |
POLYBUTYLENE TEREPHTHALATE, 30% GLASS FILLED - INTERNALLY LUBRICATED |
|
FORD ESB-M4D365-A2 |
POLYPROPYLENE, 40% CALCIUM CARBONATE FILLED - EXTRUSION GRADE - STAMPABLE, DISCONTINUED, USE DELTA ES- E97B1011014AA & ESB- M4D365-B2 |
|
FORD ESB-M4D365-B2 |
POLYPROPYLENE, 40% CALCIUM CARBONATE FILLED - EXTRUSION GRADE - STAMPABLE-Shown on ESB-M4D365-A2 |
|
FORD ESB-M4D366-A1 |
NYLON, (TYPE 6), 40% GLASS REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D400-A |
LAMINATE RIGID POLYSTYRENE, FOAM/FILM- THERMOFORMABLE, HEADLINING SUBSTRATE |
|
FORD ESB-M4D404-A |
THERMOPLASTIC POLYOLEFIN, ELASTOMER AND GLASS FIBER MODIFIED, MOLDING COMPOUND, INTERIOR GRADE, COLOR PIGMENTED, UV STABILIZED |
|
FORD ESB-M4D436-A3 |
POLYETHERIMIDE (PEI), 30% GLASS FIBER REINFORCED, INJECTION MOLDING COMPOUND |
|
FORD ESB-M4D442-A |
POLYCARBONATE, POLYBUTYLENE TEREPHTHALATE MOLDING COMPOUND |
|
FORD ESB-M4D489-A3 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED |
|
FORD ESB-M4D4-A |
ACETATE - BUTYRATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D570-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), EXTRUSION GRADE, EXTERIOR, UV STABILIZED***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D570-A1; Use WSS-M2D382-B1 |
|
FORD ESB-M98D15-A1 |
LAMINATE, POLYVINYL CHLORIDE SKIN, POLYVINYL CHLORIDE FOAM, POLYVINYL CHLORIDE SKIN, RIGID SUBSTRATE, FORMED TRIM ASSEMBLY |
|
FORD ESB-M98D17-A1 |
LAMINATE, METALLIZED POLYESTER/PVC **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD ESB-M99D35-A |
POLYVINYL CHLORIDE, REPROCESSED FLOOR MAT |
|
FORD ESB-M99D42-A |
POLYPROPYLENE, NYLON FLOCKED SURFACE *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD ESB-M99D43-B |
POLYPROPYLENE, 50% WOOD FIBER FILLED - EXTRUDED COMPOSITE***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M99D43-A |
|
FORD ESB-M99D45-A |
POLYURETHANE FILM, WATER BARRIER***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M99D55-A2 |
TUBING, POLYOLEFIN - HEAT SHRINKABLE - DUAL WALL - ADHESIVELY LINES - FLEXIBLE - FLAME RETARDED***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M99D55-A1 |
|
FORD ESE-M2D164-A |
HOSE, EPDM RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D235-D2 |
BELT, POSITIVE DRIVE - HIGH TEMPERATURE POLYCHLOROPRENE - GLASS FIBER REINFORCED, NYLON FABRIC FACING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D240-A |
FLUOROELASTOMER DIAPHRAGM, 70 DUROMETER |
|
FORD ESE-M2D289-A |
TUBING, CHLORINATED POLYETHYLENE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D345-A2 |
HOSE, SILICONE - HIGH TEMPERATURE - COOLANT RESISTANT - HIGH BURST ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESE-M2D345-A1 * |
|
FORD ESE-M2D352-A |
TUBING, RUBBER - LARGE DIAMETER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D363-A |
FLUOROELASTOMER (FKM), HIGH TEMPERATURE RESISTANT - GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D364-A |
SILICONE RUBBER, HIGH ELONGATION - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D53-A2 |
FLUOROELASTOMER, OIL SEAL - VALVE STEM - HIGH HEAT - ABRASION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M4D341-A2 |
POLYESTER, THERMOPLASTIC - 30% GLASS REINFORCED MINERAL FILLED-Shown on ESE-M4D341-A1 |
|
FORD ESF-M2D129-A |
FLUOROSILICONE RUBBER, 50 DUROMETER |
|
FORD ESF-M3D78-A |
PHENOLIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D159-A |
NYLON (TYPE 66), GLASS FIBER REINFORCED - MOLYBDENUM DISULFIDE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D164-A |
POLYURETHANE (PUR) FOAM, OPEN CELL, FILTER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D27-A |
TETRAFLUOROETHYLENE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D298-A |
POLYPROPYLENE MOLDING COMPOUND, EXTRA HIGH IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSS-M4D938-A1 |
|
FORD ESF-M4D354-A6 |
POLYBUTYLENE TEREPHTHALATE, 17% GLASS FIBER REINFORCED - SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M4D405-B |
POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD ESF-M4D405-D2 |
POLYETHYLENE TEREPHTHALATE (PET), 45 % GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND-Shown on ESF-M4D405-B |
|
FORD ESF-M96D22-A |
HOSE, REINFORCED, FLUOROELASTOMER (FKM) RUBBER, OXYGENATED AND OXIDIZED FUEL RESISTANT, IN-TANK HIGH PRESSURE FUEL LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESF-M99D48-A |
POLYPROPYLENE/POLYALLOMER FIBERS, EXTRUDED - FUEL RESISTANT |
|
FORD ESH-M2D190-B1 |
SEAL, RADIATOR CAP - NBR - ETHYLENE GLYCOL RESISTANT LATHE CUT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
|
AUTOMOTIVE ENGINEERING STANDARDS NEWS
|
|
|