| |
FORD - Plastics/Elastomers (VOLS. 5, 6, 7) Collection
Listing of active documents part of the FORD - Plastics/Elastomers (VOLS. 5, 6, 7) Collection.
|
FORD ESH-M2D272-A |
SEAL, NITRILE BUTADIENE RUBBER - REFRIGERANT AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M2D318-A |
EPDM SPONGE, SOUND DEADENING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M2D346-A |
POLYURETHANE FOAM, SOUND DEADENING - DIE CUT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D291-D |
POLYURETHANE FOAM, RESTRICTED FLOW - FLEXIBLE DIE CUT - WITHOUT ADHESIVE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESH-M4D291-C |
|
FORD ESH-M4D292-A2 |
TUBING, POLYVINYL CHLORIDE - VACUUM LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D333-A |
POLYACRYLIC RUBBER FOR OIL PAN GASKETS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D351-A |
PUR FOAM, MOULDED, ENERGY ABSORBING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D361-A2 |
POLYURETHANE (PUR) FOAM, MOLDED, ENERGY ABSORBING, LOW DENSITY, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D367-A1 |
POLYURETHANE (PUR) FOAM, MOLDED-RIGID 500 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D368-A |
POLYACRYLIC RUBBER (ACM), LIP SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M4D538-A |
POLYPROPYLENE, COOLING AGENT AND HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD ESK-M5D13-A |
POLYOL FOR ENERGY ABSORBING PUR FOAM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M96D3-A |
PUR FOAM MOULDED, RIGID, GLASS FIBER MAT REINFORCED |
|
FORD ESP-M2D294-A3 |
FLUOROELASTOMER (FKM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESP-M2D336-A |
NITRILE BUTADIENE RUBBER, OIL SEAL - AUTOMATIC TRANSMISSION - HIGH SWELLING - HIGH TEMPERATURE SERVICE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESP-M4D342-A |
NYLON (TYPE 6/6), MONOFILAMENT THREAD |
|
FORD EST-M2D81-A |
HOSE, MEDIUM PRESSURE - HIGH TEMPERATURE OIL RESISTANT ONE WIRE BRAID ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D230-A1 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD NOTICE 1 |
IMPORTANT NOTICE -- New Material Specification, WSS-M99P1111-A, Standard Requirements for Production Materials. |
|
FORD SJ-M98D9610-A |
POLYCARBONATE FILM, TRANSLUCENT |
|
FORD SK-M3D9600-A |
HOT STAMPING FILM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M98D9594-A |
ABS/PVC SHEETING, FOAM BACKED |
|
FORD SK-M98D9600-B |
POLYPROPYLENE SHEET, 40% WOOD FLOUR FILLED***TO BE USED WITH FORD WSS-M99-P1111-A***-Shown on SK-M98D9600-A |
|
FORD S-M2D4523-A |
WEATHERSTRIP, TUBULAR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M3D1009-A |
GLASS FIBER REINFORCED POLYESTER RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M98D4509-A |
PVC TRIM WELT |
|
FORD S-M98D4530-A |
NON-ADHESIVE PVC TAPE *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD S-M98D4535-A |
PROTECTION PAD *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD SQ-M2D9027-A |
CHLOROPRENE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SQ-M2D9509-A |
FLUORO ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SQ-M2D9517-A |
POLYACRYLIC RUBBER, HIGH HEAT AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M3D173-A3 |
VINYL ESTER (VE), MODIFIED, 35% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M4D688-A2 |
ABS + POLYCARBONATE BLEND (ABS+PC), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSA-M4D688-A1 |
|
FORD WSA-M96D26-A |
HOSE, REINFORCED RUBBER, AUTOMATIC TRANSMISSION FLUID RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D203-A2 |
POLYURETHANE FOAM, INTEGRAL SKIN PAINTED FORMED ASSEMBLY, NON-CRITICAL AREAS, FUNCTIONAL PARTS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D386-A1 |
SILICONE ELASTOMER (MQ), INHERENTLY LUBRICATED - LIQUID INJECTION MOLDING (LIM) COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D409-A |
POLYURETHANE (PUR) FOAM, ACOUSTICAL, 64 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M3D171-A1 |
UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND, 8% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D619-A2 |
POLYPROPYLENE (PP) SHEET, 30% LONG GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D619-A1 |
|
FORD WSB-M4D624-A |
POLYBUTYLENE TEREPHTHALATE (PBT), IMPACT MODIFIED MOLDING COMPOUND, 30% MINERAL/GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D640-A |
POLYPROPYLENE (PP), IMPACT MODIFIED 35% CHEMICALLY COUPLED GLASS FIBER/MINERAL REINFORCED, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D662-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, 20% PTFE POWDER FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D679-A |
POLYAMIDE (PA) 66, 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D677-A |
|
FORD WSB-M4D723-A |
POLYVINYL CHLORIDE (PVC), FLEXIBLE FOAMED EXTRUSION ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D732-A4 |
POLYPROPYLENE (PP) HOMOPOLYMER, GLASS FIBER/MICA REINFORCED MOLDING COMPOUND |
|
FORD WSB-M4D733-A3 |
ETHYLENE VINYL ACETATE (E/VAC) COPOLYMER MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D733-A4 |
ETHYLENE VINYL ACETATE (E/VAC) COPOLYMER MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D766-A |
POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D780-A |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 87 DUROMETER A HARDNESS MOLDING COMPOUND, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D831-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 65 DUROMETER D HARDNESS MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSB-M4D835-A |
POLYARYLSULFONE (PAS) MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSB-M4D861-A |
POLYPHTHALAMIDE (PPA), 45 % GLASS FIBER REINFORCED HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D862-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 60 D HARDNESS, 15 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D865-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D866-A2 |
ABS + POLYCARBONATE (ABS +PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D866-A1 |
|
FORD WSB-M4D868-A |
POLYETHYLENE TEREPHTHALATE (PET), 37 % GLASS FIBER REINFORCED MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D874-A |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 80 DUROMETER A HARDNESS, REMANUFACTURED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D882-A1 |
ACETAL (POM) COPOLYMER, 10% GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSB-M4D914-A |
POLYCYCLOHEXYLENE DIMETHYLENE TEREPHTHALATE (PCT) 30 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D918-A |
POLYPHENYLENE SULFIDE (PPS), 33 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D393-A2 |
SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, HIGH ELONGATION, 45 HARDNESS (IRHD), LONG-LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D405-A2 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 70 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D405-A1 |
|
FORD WSD-M2D405-A4 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 90 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D405-A1 |
|
FORD WSD-M2D420-A2 |
RUBBER, POLYCHLOROPRENE (CR) LOW TEMPERATURE FLEXIBLE, 60 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D428-A |
THERMOPLASTIC POLYESTER ETHER ELASTOMER (TEEE), 45 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D440-A |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT, METHANOL RESISTANT, 80 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D440-A3 |
FLUOROELASTOMER (FKM), 75 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D16-A |
DRIVE BELT, TOOTHED - POLYCHLOROPRENE RUBBER (CR) - PARA-ARAMID TENSION CORDS - SINGLE FACING FABRIC ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A1 |
WEATHERSTRIP, ETHYLENE/PROPYLENE (EPDM) RUBBER, THERMOPLASTIC POLYOLEFIN (TPO) CO-EXTRUDED SLIDING-COAT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A2 |
WEATHERSTRIP, ETHYLENE/PROPYLENE (EPDM) RUBBER, SHORT FIBRE FLOCK COATED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSD-M96D21-A1 |
|
FORD WSD-M96D32-A |
HOSE, NITRILE (NBR) OR PVC/NITRILE (PVC/NBR) RUBBER, EXTERNALLY REINFORCED OXYGENATED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D9-A |
TUBE, EPICHLOROHYDRIN (ECO) RUBBER, FUEL AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D9-A2 |
TUBE, EPICHLOROHYDRIN (ECO) RUBBER, FUEL, OIL AND ACIDIC AQUEOUS CONDENSATE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M96D9-A |
|
FORD WSE-M2D370-A |
POLYACRYLATE (ACM) RUBBER, GROMMET LONG LIFE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D391-A2 |
FLUOROELASTOMER (FKM), HIGH TEMPERATURE ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D401-A3 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT, COMPRESSION STRESS RELAXATION RESISTANT, LOW TEMPERATURE RESISTANT, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D401-A |
|
FORD WSE-M2D418-A2 |
SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, OIL GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D434-A |
FLUOROELASTOMER (FKM), ARAMID FIBERS REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D451-A |
HYDROGENATED NITRILE (HNBR) RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D470-A4 |
DUCT, ECO, EPICHLOROHYDRIN, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M2D470-A1 |
|
FORD WSE-M2D53-A4 |
FLUOROELASTOMER (FKM), VALVE STEM SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D14-A1 |
HOSE, EPDM RUBBER - PARA-ARAMID FIBERS REINFORCED - ENGINE COOLANT AND STEAM RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D14-A2 |
HOSE, EPDM RUBBER - META- ARAMID FIBERS REINFORCED -, ENGINE COOLANT AND STEAM RESISTANT ***TO USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M96D14-A1 |
|
FORD WSE-M96D38-A1 |
HOSE, COOLANT, STRAIGHT, FORMED, OR BRANCHED HOSE, EPDM RUBBER, PARA-ARAMID FIBER REINFORCED, ENGINE COOLANT AND ELECTROCHEMICAL DEGRADATION RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSE-M96D39-A |
HOSE, SILICONE (VMQ), HIGH TEMPERATURE, OIL RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSF-M4D620-A |
POLYETHYLENE TEREPHTHALATE (PET), 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D628-A |
POLYAMIDE (PA) 66 MOLDING COMPOUND, 25% GLASS FIBER REINFORCED, FIRE RETARDED |
|
FORD WSF-M4D629-A |
POLYETHYLENE TEREPHTHALATE (PET) MOLDING COMPOUND, 15% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D757-A |
POLYCARBONATE (PC), 12.5% TI02 FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D767-A |
POLYCARBONATE + THERMOPLASTIC COPOLYESTER BLEND (PC + PCTA) FILM, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D803-A2 |
POLYPHENYLENE SULFIDE (PPS), 65% GLASS FIBER/ MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M4D669-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED, 13% GLASS FIBER REINFORCED 100% POST INDUSTRIAL OR 25% POST CONSUMER RECYCLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-No Replacement |
|
FORD WSH-M4D724-A3 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M4D832-A |
POLYPROPYLENE (PP) HOMOPOLYMER, 10% WOLLASTONITE FILLED MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSH-M4D888-A1 |
POLYETHYLENE TEREPHTHALATE (PET), 45% GLASS FIBER REINFORCED MOLDING COMPOUND, 100% RECYCLED |
|
FORD WSK-M2D389-A2 |
POLYURETHANE (PUR) FOAM, OPEN CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D391-A |
FLUOROELASTOMER (FKM) ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D402-A1 |
POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD WSK-M2D415-A4 |
POLYURETHANE (PUR) FOAM, MOLDED SEMIRIGID, 160 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D426-A |
NITRILE BUTADIENE (NBR) RUBBER ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D427-A |
FLUOROELASTOMER (FKM), ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D427-A2 |
FLUOROELASTOMER (FKM), ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D429-A |
POLYURETHANE (PUR) MICROCELLULAR ELASTOMER, REINFORCED REACTION INJECTION MOLDED (RRIM), 20% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D458-A |
FLUOROELASTOMER (FKM), ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D590-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, 14% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D591-A |
|
FORD WSK-M4D592-A |
POLYETHERSULFONE (PES), SE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D607-A |
POLYBUTYLENE TEREPHTHALATE (PBT) 30% GLASS FIBRE REINFORCED IMPACT MODIFIED MOLDING COMPOUND |
|
FORD WSK-M4D613-A2 |
POLYAMIDE 11 (PA11), RIGID, HEAT STABILISED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D623-A |
POLYPHENYLENE ETHER + POLYAMIDE (PPE+PA) BLEND MOLDING COMPOUND, IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D623-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D625-A |
POLYBUTHYLENE TEREPHTHALATE (PBT) 40% GLASS FIBER/MINERAL REINFORCED LOW WARPAGE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D626-A1 |
POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT, SE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D635-A3 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 23 - 35 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D635-A1 |
|
FORD WSK-M4D637-A5 |
ACETAL (POM) HOMOPOLYMER, CHEMICALLY LUBRICATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D639-A |
POLYBUTYLENE TEREPHTHALATE (PBT) EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D646-A |
POLYVINYL CHLORIDE (PVC), RIGID MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D654-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, 40% GLASS SPHERE REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D654-A2 |
|
FORD WSK-M4D674-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 50% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D675-A |
ETHYLENE VINYL ACETATE (EVAC) FOAM CROSSLINKED, CLOSED CELL, 30 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D676-A10 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 95 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A4 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 65 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A5 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 70 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A6 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 75 A HARDNESS-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A8 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 85 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A9 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 90 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D694-A |
THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE), 63 DUROMETER D HARDNESS MOLDING COMPOUND |
|
FORD WSK-M4D702-A |
ACETAL (POM) COPOLYMER, MINERAL OIL IMPREGNATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D709-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, HIGH IMPACT AND HIGH TENSILE STRENGTH-REPLACES SK-M4D9793-A/B |
|
FORD WSK-M4D716-A |
POLYETHERIMIDE (PEI) MOLDING COMPOUND, SELF-EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D722-A2 |
ABS, 7 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D737-A3 |
POLYBUTYLENE TEREPHTHALATE (PBT) MODIFIED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D737-A2 |
|
FORD WSK-M4D739-A |
POLYAMIDE (PA) 12, RIGID, HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D739-A2 |
POLYAMIDE (PA) 12, RIGID, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D739-A3 |
POLYAMIDE 12 (PA12), RIGID, HEAT STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D739-A4 |
POLYAMIDE 12 (PA12), RIGID, HIGH HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D740-A |
ABS/PVC BLEND, VACUUM FORMABLE SHEET |
|
FORD WSK-M4D741-A1 |
POLYPROPYLENE (PP) COPOLYMER COOLING AGENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D969-A |
|
FORD WSK-M4D741-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D753-A |
POLYBUTYLENE TEREPHTHALATE (PBT), MODIFIED, 20% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D755-A3 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 65 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D758-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D763-A1 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED, VERY EASY FLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D763-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED, EASY FLOW MOLDING COMPOUND, EXTERIOR-REPLACES ESK-M4D544-A1; ESK-M4D441-A |
|
FORD WSK-M4D763-A3 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED, EASY FLOW MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D763-A5 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED, EASY FLOW, HEAT OPTIMIZED MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D763-A3 |
|
FORD WSK-M4D771-A |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D773-A2 |
POLYARYLSULFONE (PAS), HEAT STABILIZED, 20 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D789-A |
POLYBUTYLENE TEREPHTHALATE + POLYCARBONATE BLEND (PBT +PC), 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D789-A2 |
POLYBUTYLENE TEREPHTHALATE + POLYCARBONATE BLEND (PBT +PC), 10 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D817-A |
PERFLUORO ALKOXY (PFA) COPOLYMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D818-A |
POLYPROPYLENE (PP) SHEET, 40% CONTINUOUS GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D837-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 20% GLASS SPHERE FILLED MOLDING COMPOUND |
|
FORD WSK-M4D838-A |
POLYETHERETHERKETONE (PEEK), SELF-EXTINGUISHING (SE) MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D848-A |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT) SHEET, 30 % LONG GLASS FIBERS REINFORCED |
|
FORD WSK-M4D852-A |
ACETAL (POM) COPOLYMER, MOLYBDENUM DISULPHIDE FILLED MOLDING COMPOUND |
|
FORD WSK-M4D858-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED MOLDING COMPOUND, RECYCLATE, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D876-A2 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D876-A1 |
|
FORD WSK-M4D890-A1 |
POLYAMIDE 12 (PA 12) COPOLYMER, AMORPHOUS MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D893-A1 |
THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 66 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D902-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D905-A2 |
ABS, HIGH IMPACT STRENGTH EXTRUSION MOLDING COMPOUND, INTERIOR-Shown on WSK-M4D905-A1 |
|
FORD WSK-M4D916-A |
POLYAMIDE 46 (PA46), 30% GLASS SPHERE REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M97D2-A |
PHENOLIC (PF), 40 % GLASS FIBER REINFORCED SHEET **TO BE USED WITH FORD WSS-M99P111-A** |
|
FORD WSK-M98D23-A |
PVC/METALLIZED POLYESTER FILM/PVC LAMINATE DECORATIVE COEXTRUSION MOLDING **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSK-M98D25-A |
POLYPROPYLENE (PP) SHEET, 50% WOOD FLOUR FILLED **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSL-M96D33-A |
HOSE, REINFORCED RUBBER, FUEL RESISTANT, STATIC CONDUCTIVE |
|
FORD WSL-M96D33-A5 |
HOSE, NON-REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTING, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M96D35-A |
ENERGY ABSORBING COMPOSITE, HOLLOW CERAMIC SPHERES WITH BINDER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D375-A |
ETHYLENE/ACRYLIC (AEM) RUBBER, AUTOMATIC TRANSMISSION FLUID RESISTANT, FILTER GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D455-A2 |
FLUOROELASTOMER (FPM), OIL RESISTANT ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSP-M2D455-A |
|
FORD WSS-M2D476-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 100% RECYCLED RUBBER MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D476-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50% MINIMUM RECYCLED CONTENT, HARDNESS 80 DUROMETER A ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D476-A3 |
|
FORD WSS-M2D476-A8 |
THERMOPLASTIC ELASTOMER, POLYPROPYLENE, SBR/NR (50% TYRE CRUMB) 81 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS. 65% POST CONSUMER RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D484-A |
POLYURETHANE (PUR) FOAM, MOLDED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D488-A1 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 50 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D488-A2 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 50 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D489-A1 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D489-A2 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D489-A3 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, HIGH ELONGATION, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D492-A2 |
STYRENE BUTADIENE RUBBER (SBR) AND POLYMER BINDER, DIE CUT SHEET, POST CONSUMER RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D496-A4 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D496-A7 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D496-A9 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D498-A2 |
POLYURETHANE FOAM, OPEN CELL - RETICULATED, 18 CELLS/10 MM ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D498-A1 |
|
FORD WSS-M2D501-A |
THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D502-A |
POLYURETHANE (PUR) FOAM, MICROCELLULAR, SHOCK AND VIBRATION ISOLATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D505-A3 |
THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 70 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D505-A6 |
THERMOPLASTIC ELASTOMER, POLYOLEFIN EP RUBBER MODIFIED (TEO), 55 DUROMETER D HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D507-A3 |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 75 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D507-A |
|
FORD WSS-M2D510-A5 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M2D510-A7 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M2D510-A8 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M2D53-B3 |
FLUOROELASTOMER, OIL SEAL, VALVE STEM, HIGH HEAT, IMPROVED OIL AND ABRASION RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D579-A2 |
POLYVINYL CHLORIDE (PVC), OLEFIN MODIFIED - RIGID - HIGH HEAT - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D582-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), POLYETHYLENE TEREPHTHALATE, HEAT STABILIZED 50% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D627-A2 |
POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-REPLACES SL-M4D9656-A |
|
FORD WSS-M4D628-A2 |
POLYAMIDE (PA) 66 MOLDING COMPOUND, 25% GLASS SPHERE REINFORCED, FIRE RETARDANT, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D649-A4 |
POLYETHELENE (PE) FOAM, CHEMICALLY CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D664-A4 |
POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER/ MINERAL REINFORCED, MINIMUM 25% PCR AND/OR PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D968-A |
|
FORD WSS-M4D682-A6 |
ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR, METALLIC EFFECT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D713-A7 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 4% GLASS/MINERAL FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D726-A3 |
POLYETHYLENE TEREPHTHALATE (PET) 30% GLASS FIBER REINFORCED POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D738-A2 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 30% MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D744-A3 |
ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 19 - 31, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D744-A2 |
|
FORD WSS-M4D777-A8 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) HIGH COLD IMPACT EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D873-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 20% MINERAL FILLED, LOW THERMAL EXPANSION HIGH IMPACT MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M4D873-A3; Use WSS-M4D492-B2 |
|
FORD WSS-M4D928-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED MOLDING COMPOUND, RECYCLATE, 25% MINIMUM RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D950-A1 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU)/ ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D951-A1 |
POLYAMIDE (PA) 66 HEAT STABILIZED, 19% GLASS/MINERAL REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D962-A |
THERMOPLASTIC POLYESTER ELASTOMERIC MOLDING COMPOUND, 20% GLASS FIBER REINFORCED *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D964-A2 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D975-A3 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND AIRBAG COVER, 40 D DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M4D975-A |
|
FORD WSS-M4D977-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 30% GLASS FIBER REINFORCED MOLDING COMPOUND *** TO BE USED WITH FORD WSS-M99P1111-A ***-Shown on WSS-M4D977-A |
|
FORD WSS-M4D983-A |
SPRAY ALIPHATIC POLYURETHANE SKIN *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D994-A |
POLYPROPYLENE (PP) COPOLYMER, 15% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, BLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D996-A1 |
POLYPROPYLENE (PP) COPOLYMER, 20% TALC FILLED, COLOR PIGMENTED, UV STABILIZED, BLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M5D19-A |
ISOCYANATE FOR PUR FOAM SEALS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M5D20-A |
POLYOL FOR PUR FOAM SEALS ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D14-A4 |
HOSE, EPDM RUBBER - RAYON OR POLYESTER REINFORCED, ENGINE COOLANT RESISTANT LOW COMPRESSION SET ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D25-A4 |
HOSE, AIR CONDITIONING REFRIGERANT (VENEER) RESISTANT, LOW-MEDIUM-HIGH PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D33-A6 |
HOSE, REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D42-A |
HOSE, LOW AND HIGH PRESSURE CLUTCH, RUBBER-REINFORCED, BRAKE FLUID DOT 4 AND SUPER DOT 4 (SAE J1704/ISO 4925) RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSS-M96D46-A1 |
HOSE, REINFORCED, DIESEL FUEL RESISTANT, HEAVY-DUTY, ABRASION RESISTANT COVER **TO BE USED WITH FORD WSS-M99-P111-A** |
|
FORD WSS-M98D33-A2 |
TUBE, POLYAMIDE 12 (PA12) COVER, TIE LAYER, ETFE TUBE, HIGH PRESSURE, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A7 |
TUBING, ALLOYED POLYAMIDE COVER, FEP INNER TUBE, NON-CONDUCTIVE, LOW PERMEATING FUEL VAPOR LINE *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSZ-M4D778-A |
ABS, HIGH IMPACT MOLDING COMPOUND, PAINTABLE |
|
FORD WSZ-M4D781-A |
ABS, SELF EXTINGUISHING MOLDING COMPOUND, INTERIOR |
|
FORD WSZ-M4D782-A |
ABS/PC BLEND, SELF EXTINGUISHING MOLDING COMPOUND, INTERIOR |
|
FORD WSZ-M4D787-A |
POLYAMIDE (PA) 6, HEAT STABILIZED, 33% SHORT GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD ESA-M2D17-B |
HOSE, HIGH EXPANSION - POWER STEERING PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D197-A1 |
THERMOPLASTIC POLYURETHANE ELASTOMER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D344-A |
POLYURETHANE ELASTOMER, INJECTION MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D69-A |
RUBBER, NEOPRENE LATEX - COATING - OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M3D73-B |
PHENOLIC MOLDING COMPOUND, FLOCK FILLED - MEDIUM IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D142-A2 |
POLYTETRAFLUOROETHYLENE (PTFE) ELASTOMERIC LUBRICANT, WATER BASE POLYURETHANE BINDER, DIP OR SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D160-C |
HOSE, MEDIUM PRESSURE- AIR CONDITIONING UNITS, NYLON CONSTRUCTION ACID RESISTANT SLEEVE |
|
FORD ESA-M4D182-A |
POLYURETHANE, CAST - 52 DUROMETER |
|
FORD ESA-M4D347-A |
POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D359-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), EXTRUSION MOLDING COMPOUND-Shown on ESA-M4D359-A1 |
|
FORD ESA-M4D396-A |
ACRYLIC, STYRENE MODIFIED |
|
FORD ESA-M4D433-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, BLOW MOLDING COMPOUND |
|
FORD ESA-M4D465-A1 |
TUBING, PTFE - GLASS SPHERE FILLED |
|
FORD ESA-M96D19-A |
HOSE, REINFORCED RUBBER, FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D114-A |
RUBBER - SCRAP TIRE CASING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D155-A |
RUBBER SPONGE SHEET, CLOSED CELL - RECLAIMED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D175-A |
TUBING, UNREINFORCED EPDM - VACUUM LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D260-B |
POLYURETHANE FOAM, SLAB - POLYESTER TYPE, HEAT FORMABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D263-A4 |
POLYURETHANE, MICROCELLULAR ELASTOMER - RIM - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D297-A4 |
POLYURETHANE FOAM, ACOUSTICAL - 80 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D302-A |
SILICONE ELASTOMER, PRELUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D354-A2 |
POLYURETHANE MICROCELLULAR ELASTOMER, 15% GLASS FIBER REINFORCED - RRIM - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D357-A |
SILICONE ELASTOMER, COLOR PIGMENTED - WEATHERABLE - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D67-A |
NEOPRENE, LATEX, DIP COATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D101-A |
POLYESTER RESIN, FIBERGLASS REINFORCED BULK MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D127-A |
POLYESTER RESIN, GLASS FIBER REINFORCED - INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D16-A |
PHENOLIC MOLDING COMPOUND, CELLULOSE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D20-A |
POLYESTER RESIN - FIBERGLASS MAT REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D257-A |
LAMINATE, POLYVINYL CHLORIDE - POLYURETHANE FOAM – METAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D263-C3 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - ELECTRICAL GRADE - SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D263-C4 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - HIGH HEAT - OPTIMUM PROCESSING ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D263-C5 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING COMPOUND - HIGH HEAT - ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D278-A |
NYLON COPOLYMER, EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D279-A |
LAMINATE, POLYVINYL FLOURIDE POLYVINYL CHLORIDE - METAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D297-A3 |
ABS, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D297-A1 |
|
FORD ESB-M4D330-A4 |
IONOMER (ETHYLENE) MOLDING COMPOUND, BLACK - SODIUM TYPE - EXTERIOR GRADE - NOT PAINTABLE-Shown on ESB-M4D330-A1 |
|
FORD ESB-M4D330-A5 |
IONOMER (ETHYLENE) MOLDING COMPOUND, FOAMED GLASS FILLED - BLACK - ZINC/SODIUM TYPE EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D330-A6 |
IONOMER MOLDING COMPOUND, ZINC/SODIUM TYPE - GLASS FIBER MODIFIED - BLACK - EXTERIOR GRADE-Shown on ESB-M4D330-A1 |
|
FORD ESB-M4D345-B |
POLYPROPYLENE SHEET, 40% CONTINUOUS GLASS FIBER REINFORCED |
|
FORD ESB-M4D354-A4 |
POLYBUTYLENE TEREPHTHALATE, 26% GLASS FILLED - SELF EXTINGUISHING - NONPAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D354-A3 |
|
FORD ESB-M4D358-A |
LAMINATE, POLYVINYL CHLORIDE FOAM-POLYVINYL CHLORIDE SKIN - RIGID SUBSTRATE FORMED TRIM ASSEMBLY |
|
FORD ESB-M4D360-A |
TUBING, POLYVINYL CHLORIDE - HEAT SHRINKABLE |
|
FORD ESB-M4D366-A2 |
NYLON (TYPE 6/6), 25% GLASS SPHERE - 15% GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D366-A1 |
|
FORD ESB-M4D382-A |
LAMINATE, VINYL-METAL - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D411-B |
LAMINATE, POLYVINYL CHLORIDE SKIN - POLYVINYL CHLORIDE FOAM, POLYVINYL CHLORIDE SKIN - RIGID SUBSTRATE - FORMED TRIM ASSEMBLY - LOW FOG |
|
FORD ESB-M4D442-A3 |
PC/PBT ALLOY, RUBBER MODIFIED MOLDING COMPOUND - PAINTABLE |
|
FORD ESB-M4D489-A2 |
STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA) RUBBER MODIFIED, 20 % GLASS FIBER/10% ACRYLIC REGRIND REINFORCED |
|
FORD ESB-M4D524-A |
ETHYLENE VINYL ACETATE COPOLYMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D529-A |
POLYETHER BLOCK AMIDE (PEBA) THERMOPLASTIC ELASTOMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D537-A |
POLYPHENYLENE ETHER (PPE), MODIFIED MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D9-A11 |
ACRYLIC (PMMA), HIGH IMPACT RESISTANT, EXTERIOR - OPTICAL GRADE |
|
FORD ESB-M98D17-A2 |
LAMINATE, METALLIZED POLYESTER/PVC **TO BE USED WITH FORD WSS-M99P1111-A**-Shown on ESB-M98D17-A1 |
|
FORD ESB-M98D17-A3 |
LAMINATE, METALLIZED POLYESTER/PVC **TO BE USED WITH FORD WSS-M99P1111-A**-Shown on ESB-M98D17-A1 |
|
FORD ESB-M98D9-A |
LAMINATE, POLYVINYL CHLORIDE/METAL - INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M2D372-A2 |
RUBBER- CARBOXYLATED NITRILE (XNBR) ABRASION, HOT OIL AND HOT TEAR RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M96D5-A |
DRIVE BELT, TOOTHED, DOUBLE FABRIC HEAVY DUTY ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M96D7-A2 |
HOSE- SILICONE (VMQ) RUBBER, REINFORCED- VACUUM COLLAPSE RESISTANT, MEDIUM TEMPERATURE RESISTANT ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D147-A |
HOSE, RUBBER-OZONE RESISTANT COVER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D158-A |
TUBING, CHLOROSULFONATED POLYETHYLENE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D158-B |
RUBBER, CHLOROSULFONATED POLYETHYLENE LOW EXTRACTABLES ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D165-B |
RUBBER GROMMETS, EMISSION VALVE - OIL, HEAT AND OZONE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D190-A |
SEAL, RADIATOR CAP - NBR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D232-A |
EPICHLOROHYDRIN, RUBBER - 70 DUROMETER |
|
FORD ESE-M2D241-A |
TUBING, EPICHLOROHYDRIN RUBBER - FUEL AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D249-A |
TUBING, SILICONE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D286-A |
HOSE, REINFORCED RUBBER - FUEL LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D316-A |
TUBING, EPDM - SHORT FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D326-A |
RUBBER, HIGH TEMPERATURE, ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D338-A2 |
FLUOROELASTOMER, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESE-M2D338-A1 |
|
FORD ESE-M2D345-A1 |
HOSE, SILICONE - HIGH TEMPERATURE - COOLANT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D347-A |
SILICONE RUBBER, HIGH TEMPERATURE - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M2D272-A |
SEAL, NITRILE BUTADIENE RUBBER - REFRIGERANT AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M2D318-A |
EPDM SPONGE, SOUND DEADENING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M2D346-A |
POLYURETHANE FOAM, SOUND DEADENING - DIE CUT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D291-D |
POLYURETHANE FOAM, RESTRICTED FLOW - FLEXIBLE DIE CUT - WITHOUT ADHESIVE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESH-M4D291-C |
|
FORD ESH-M4D292-A2 |
TUBING, POLYVINYL CHLORIDE - VACUUM LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D333-A |
POLYACRYLIC RUBBER FOR OIL PAN GASKETS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D351-A |
PUR FOAM, MOULDED, ENERGY ABSORBING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D361-A2 |
POLYURETHANE (PUR) FOAM, MOLDED, ENERGY ABSORBING, LOW DENSITY, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D367-A1 |
POLYURETHANE (PUR) FOAM, MOLDED-RIGID 500 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D368-A |
POLYACRYLIC RUBBER (ACM), LIP SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M4D538-A |
POLYPROPYLENE, COOLING AGENT AND HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD ESK-M5D13-A |
POLYOL FOR ENERGY ABSORBING PUR FOAM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M96D3-A |
PUR FOAM MOULDED, RIGID, GLASS FIBER MAT REINFORCED |
|
FORD ESP-M2D294-A3 |
FLUOROELASTOMER (FKM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESP-M2D336-A |
NITRILE BUTADIENE RUBBER, OIL SEAL - AUTOMATIC TRANSMISSION - HIGH SWELLING - HIGH TEMPERATURE SERVICE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESP-M4D342-A |
NYLON (TYPE 6/6), MONOFILAMENT THREAD |
|
FORD EST-M2D81-A |
HOSE, MEDIUM PRESSURE - HIGH TEMPERATURE OIL RESISTANT ONE WIRE BRAID ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D230-A1 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD NOTICE 1 |
IMPORTANT NOTICE -- New Material Specification, WSS-M99P1111-A, Standard Requirements for Production Materials. |
|
FORD SJ-M98D9610-A |
POLYCARBONATE FILM, TRANSLUCENT |
|
FORD SK-M3D9600-A |
HOT STAMPING FILM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M98D9594-A |
ABS/PVC SHEETING, FOAM BACKED |
|
FORD SK-M98D9600-B |
POLYPROPYLENE SHEET, 40% WOOD FLOUR FILLED***TO BE USED WITH FORD WSS-M99-P1111-A***-Shown on SK-M98D9600-A |
|
FORD S-M2D4523-A |
WEATHERSTRIP, TUBULAR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M3D1009-A |
GLASS FIBER REINFORCED POLYESTER RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M98D4509-A |
PVC TRIM WELT |
|
FORD S-M98D4530-A |
NON-ADHESIVE PVC TAPE *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD S-M98D4535-A |
PROTECTION PAD *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD SQ-M2D9027-A |
CHLOROPRENE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SQ-M2D9509-A |
FLUORO ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SQ-M2D9517-A |
POLYACRYLIC RUBBER, HIGH HEAT AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M3D173-A3 |
VINYL ESTER (VE), MODIFIED, 35% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M4D688-A2 |
ABS + POLYCARBONATE BLEND (ABS+PC), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSA-M4D688-A1 |
|
FORD WSA-M96D26-A |
HOSE, REINFORCED RUBBER, AUTOMATIC TRANSMISSION FLUID RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D203-A2 |
POLYURETHANE FOAM, INTEGRAL SKIN PAINTED FORMED ASSEMBLY, NON-CRITICAL AREAS, FUNCTIONAL PARTS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D386-A1 |
SILICONE ELASTOMER (MQ), INHERENTLY LUBRICATED - LIQUID INJECTION MOLDING (LIM) COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D409-A |
POLYURETHANE (PUR) FOAM, ACOUSTICAL, 64 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M3D171-A1 |
UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND, 8% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D619-A2 |
POLYPROPYLENE (PP) SHEET, 30% LONG GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D619-A1 |
|
FORD WSB-M4D624-A |
POLYBUTYLENE TEREPHTHALATE (PBT), IMPACT MODIFIED MOLDING COMPOUND, 30% MINERAL/GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D640-A |
POLYPROPYLENE (PP), IMPACT MODIFIED 35% CHEMICALLY COUPLED GLASS FIBER/MINERAL REINFORCED, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D662-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, 20% PTFE POWDER FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D679-A |
POLYAMIDE (PA) 66, 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D677-A |
|
FORD WSB-M4D723-A |
POLYVINYL CHLORIDE (PVC), FLEXIBLE FOAMED EXTRUSION ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D732-A4 |
POLYPROPYLENE (PP) HOMOPOLYMER, GLASS FIBER/MICA REINFORCED MOLDING COMPOUND |
|
FORD WSB-M4D733-A3 |
ETHYLENE VINYL ACETATE (E/VAC) COPOLYMER MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D733-A4 |
ETHYLENE VINYL ACETATE (E/VAC) COPOLYMER MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D766-A |
POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D780-A |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 87 DUROMETER A HARDNESS MOLDING COMPOUND, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D831-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 65 DUROMETER D HARDNESS MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSB-M4D835-A |
POLYARYLSULFONE (PAS) MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSB-M4D861-A |
POLYPHTHALAMIDE (PPA), 45 % GLASS FIBER REINFORCED HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D862-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 60 D HARDNESS, 15 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D865-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D866-A2 |
ABS + POLYCARBONATE (ABS +PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D866-A1 |
|
FORD WSB-M4D868-A |
POLYETHYLENE TEREPHTHALATE (PET), 37 % GLASS FIBER REINFORCED MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D874-A |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 80 DUROMETER A HARDNESS, REMANUFACTURED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D882-A1 |
ACETAL (POM) COPOLYMER, 10% GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSB-M4D914-A |
POLYCYCLOHEXYLENE DIMETHYLENE TEREPHTHALATE (PCT) 30 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D918-A |
POLYPHENYLENE SULFIDE (PPS), 33 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D393-A2 |
SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, HIGH ELONGATION, 45 HARDNESS (IRHD), LONG-LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D405-A2 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 70 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D405-A1 |
|
FORD WSD-M2D405-A4 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 90 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D405-A1 |
|
FORD WSD-M2D420-A2 |
RUBBER, POLYCHLOROPRENE (CR) LOW TEMPERATURE FLEXIBLE, 60 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D428-A |
THERMOPLASTIC POLYESTER ETHER ELASTOMER (TEEE), 45 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D440-A |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT, METHANOL RESISTANT, 80 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D440-A3 |
FLUOROELASTOMER (FKM), 75 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D16-A |
DRIVE BELT, TOOTHED - POLYCHLOROPRENE RUBBER (CR) - PARA-ARAMID TENSION CORDS - SINGLE FACING FABRIC ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A1 |
WEATHERSTRIP, ETHYLENE/PROPYLENE (EPDM) RUBBER, THERMOPLASTIC POLYOLEFIN (TPO) CO-EXTRUDED SLIDING-COAT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A2 |
WEATHERSTRIP, ETHYLENE/PROPYLENE (EPDM) RUBBER, SHORT FIBRE FLOCK COATED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSD-M96D21-A1 |
|
FORD WSD-M96D32-A |
HOSE, NITRILE (NBR) OR PVC/NITRILE (PVC/NBR) RUBBER, EXTERNALLY REINFORCED OXYGENATED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D9-A |
TUBE, EPICHLOROHYDRIN (ECO) RUBBER, FUEL AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D9-A2 |
TUBE, EPICHLOROHYDRIN (ECO) RUBBER, FUEL, OIL AND ACIDIC AQUEOUS CONDENSATE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M96D9-A |
|
FORD WSE-M2D370-A |
POLYACRYLATE (ACM) RUBBER, GROMMET LONG LIFE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D391-A2 |
FLUOROELASTOMER (FKM), HIGH TEMPERATURE ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D401-A3 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT, COMPRESSION STRESS RELAXATION RESISTANT, LOW TEMPERATURE RESISTANT, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D401-A |
|
FORD WSE-M2D418-A2 |
SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, OIL GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D434-A |
FLUOROELASTOMER (FKM), ARAMID FIBERS REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D451-A |
HYDROGENATED NITRILE (HNBR) RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D470-A4 |
DUCT, ECO, EPICHLOROHYDRIN, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M2D470-A1 |
|
FORD WSE-M2D53-A4 |
FLUOROELASTOMER (FKM), VALVE STEM SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D14-A1 |
HOSE, EPDM RUBBER - PARA-ARAMID FIBERS REINFORCED - ENGINE COOLANT AND STEAM RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D14-A2 |
HOSE, EPDM RUBBER - META- ARAMID FIBERS REINFORCED -, ENGINE COOLANT AND STEAM RESISTANT ***TO USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M96D14-A1 |
|
FORD WSE-M96D38-A1 |
HOSE, COOLANT, STRAIGHT, FORMED, OR BRANCHED HOSE, EPDM RUBBER, PARA-ARAMID FIBER REINFORCED, ENGINE COOLANT AND ELECTROCHEMICAL DEGRADATION RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSE-M96D39-A |
HOSE, SILICONE (VMQ), HIGH TEMPERATURE, OIL RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSF-M4D620-A |
POLYETHYLENE TEREPHTHALATE (PET), 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D628-A |
POLYAMIDE (PA) 66 MOLDING COMPOUND, 25% GLASS FIBER REINFORCED, FIRE RETARDED |
|
FORD WSF-M4D629-A |
POLYETHYLENE TEREPHTHALATE (PET) MOLDING COMPOUND, 15% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D757-A |
POLYCARBONATE (PC), 12.5% TI02 FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D767-A |
POLYCARBONATE + THERMOPLASTIC COPOLYESTER BLEND (PC + PCTA) FILM, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D803-A2 |
POLYPHENYLENE SULFIDE (PPS), 65% GLASS FIBER/ MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M4D669-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED, 13% GLASS FIBER REINFORCED 100% POST INDUSTRIAL OR 25% POST CONSUMER RECYCLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-No Replacement |
|
FORD WSH-M4D724-A3 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M4D832-A |
POLYPROPYLENE (PP) HOMOPOLYMER, 10% WOLLASTONITE FILLED MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSH-M4D888-A1 |
POLYETHYLENE TEREPHTHALATE (PET), 45% GLASS FIBER REINFORCED MOLDING COMPOUND, 100% RECYCLED |
|
FORD WSK-M2D389-A2 |
POLYURETHANE (PUR) FOAM, OPEN CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D391-A |
FLUOROELASTOMER (FKM) ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D402-A1 |
POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD WSK-M2D415-A4 |
POLYURETHANE (PUR) FOAM, MOLDED SEMIRIGID, 160 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D426-A |
NITRILE BUTADIENE (NBR) RUBBER ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D427-A |
FLUOROELASTOMER (FKM), ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D427-A2 |
FLUOROELASTOMER (FKM), ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D429-A |
POLYURETHANE (PUR) MICROCELLULAR ELASTOMER, REINFORCED REACTION INJECTION MOLDED (RRIM), 20% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D458-A |
FLUOROELASTOMER (FKM), ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D590-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, 14% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D591-A |
|
FORD WSK-M4D592-A |
POLYETHERSULFONE (PES), SE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D607-A |
POLYBUTYLENE TEREPHTHALATE (PBT) 30% GLASS FIBRE REINFORCED IMPACT MODIFIED MOLDING COMPOUND |
|
FORD WSK-M4D613-A2 |
POLYAMIDE 11 (PA11), RIGID, HEAT STABILISED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D623-A |
POLYPHENYLENE ETHER + POLYAMIDE (PPE+PA) BLEND MOLDING COMPOUND, IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D623-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D625-A |
POLYBUTHYLENE TEREPHTHALATE (PBT) 40% GLASS FIBER/MINERAL REINFORCED LOW WARPAGE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D626-A1 |
POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT, SE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D635-A3 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 23 - 35 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D635-A1 |
|
FORD WSK-M4D637-A5 |
ACETAL (POM) HOMOPOLYMER, CHEMICALLY LUBRICATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D639-A |
POLYBUTYLENE TEREPHTHALATE (PBT) EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D646-A |
POLYVINYL CHLORIDE (PVC), RIGID MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D654-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, 40% GLASS SPHERE REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D654-A2 |
|
FORD WSK-M4D674-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 50% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D675-A |
ETHYLENE VINYL ACETATE (EVAC) FOAM CROSSLINKED, CLOSED CELL, 30 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D676-A10 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 95 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A4 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 65 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A5 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 70 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A6 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 75 A HARDNESS-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A8 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 85 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A9 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 90 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D694-A |
THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE), 63 DUROMETER D HARDNESS MOLDING COMPOUND |
|
FORD WSK-M4D702-A |
ACETAL (POM) COPOLYMER, MINERAL OIL IMPREGNATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D709-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, HIGH IMPACT AND HIGH TENSILE STRENGTH-REPLACES SK-M4D9793-A/B |
|
FORD WSK-M4D716-A |
POLYETHERIMIDE (PEI) MOLDING COMPOUND, SELF-EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D722-A2 |
ABS, 7 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D737-A3 |
POLYBUTYLENE TEREPHTHALATE (PBT) MODIFIED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D737-A2 |
|
FORD WSK-M4D739-A |
POLYAMIDE (PA) 12, RIGID, HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D739-A2 |
POLYAMIDE (PA) 12, RIGID, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D739-A3 |
POLYAMIDE 12 (PA12), RIGID, HEAT STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D739-A4 |
POLYAMIDE 12 (PA12), RIGID, HIGH HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D740-A |
ABS/PVC BLEND, VACUUM FORMABLE SHEET |
|
FORD WSK-M4D741-A1 |
POLYPROPYLENE (PP) COPOLYMER COOLING AGENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D969-A |
|
FORD WSK-M4D741-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D753-A |
POLYBUTYLENE TEREPHTHALATE (PBT), MODIFIED, 20% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D755-A3 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 65 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D758-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D763-A1 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED, VERY EASY FLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D763-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED, EASY FLOW MOLDING COMPOUND, EXTERIOR-REPLACES ESK-M4D544-A1; ESK-M4D441-A |
|
FORD WSK-M4D763-A3 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED, EASY FLOW MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D763-A5 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED, EASY FLOW, HEAT OPTIMIZED MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D763-A3 |
|
FORD WSK-M4D771-A |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D773-A2 |
POLYARYLSULFONE (PAS), HEAT STABILIZED, 20 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D789-A |
POLYBUTYLENE TEREPHTHALATE + POLYCARBONATE BLEND (PBT +PC), 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D789-A2 |
POLYBUTYLENE TEREPHTHALATE + POLYCARBONATE BLEND (PBT +PC), 10 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D817-A |
PERFLUORO ALKOXY (PFA) COPOLYMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D818-A |
POLYPROPYLENE (PP) SHEET, 40% CONTINUOUS GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D837-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 20% GLASS SPHERE FILLED MOLDING COMPOUND |
|
FORD WSK-M4D838-A |
POLYETHERETHERKETONE (PEEK), SELF-EXTINGUISHING (SE) MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D848-A |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT) SHEET, 30 % LONG GLASS FIBERS REINFORCED |
|
FORD WSK-M4D852-A |
ACETAL (POM) COPOLYMER, MOLYBDENUM DISULPHIDE FILLED MOLDING COMPOUND |
|
FORD WSK-M4D858-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED MOLDING COMPOUND, RECYCLATE, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D876-A2 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D876-A1 |
|
FORD WSK-M4D890-A1 |
POLYAMIDE 12 (PA 12) COPOLYMER, AMORPHOUS MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D893-A1 |
THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 66 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D902-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D905-A2 |
ABS, HIGH IMPACT STRENGTH EXTRUSION MOLDING COMPOUND, INTERIOR-Shown on WSK-M4D905-A1 |
|
FORD WSK-M4D916-A |
POLYAMIDE 46 (PA46), 30% GLASS SPHERE REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M97D2-A |
PHENOLIC (PF), 40 % GLASS FIBER REINFORCED SHEET **TO BE USED WITH FORD WSS-M99P111-A** |
|
FORD WSK-M98D23-A |
PVC/METALLIZED POLYESTER FILM/PVC LAMINATE DECORATIVE COEXTRUSION MOLDING **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSK-M98D25-A |
POLYPROPYLENE (PP) SHEET, 50% WOOD FLOUR FILLED **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSL-M96D33-A |
HOSE, REINFORCED RUBBER, FUEL RESISTANT, STATIC CONDUCTIVE |
|
FORD WSL-M96D33-A5 |
HOSE, NON-REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTING, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M96D35-A |
ENERGY ABSORBING COMPOSITE, HOLLOW CERAMIC SPHERES WITH BINDER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D375-A |
ETHYLENE/ACRYLIC (AEM) RUBBER, AUTOMATIC TRANSMISSION FLUID RESISTANT, FILTER GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D455-A2 |
FLUOROELASTOMER (FPM), OIL RESISTANT ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSP-M2D455-A |
|
FORD WSS-M2D476-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 100% RECYCLED RUBBER MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D476-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50% MINIMUM RECYCLED CONTENT, HARDNESS 80 DUROMETER A ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D476-A3 |
|
FORD WSS-M2D476-A8 |
THERMOPLASTIC ELASTOMER, POLYPROPYLENE, SBR/NR (50% TYRE CRUMB) 81 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS. 65% POST CONSUMER RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D484-A |
POLYURETHANE (PUR) FOAM, MOLDED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D488-A1 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 50 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D488-A2 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 50 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D489-A1 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D489-A2 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D489-A3 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, HIGH ELONGATION, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D492-A2 |
STYRENE BUTADIENE RUBBER (SBR) AND POLYMER BINDER, DIE CUT SHEET, POST CONSUMER RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D496-A4 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D496-A7 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D496-A9 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D498-A2 |
POLYURETHANE FOAM, OPEN CELL - RETICULATED, 18 CELLS/10 MM ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D498-A1 |
|
FORD WSS-M2D501-A |
THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D502-A |
POLYURETHANE (PUR) FOAM, MICROCELLULAR, SHOCK AND VIBRATION ISOLATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D505-A3 |
THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 70 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D505-A6 |
THERMOPLASTIC ELASTOMER, POLYOLEFIN EP RUBBER MODIFIED (TEO), 55 DUROMETER D HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D507-A3 |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 75 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D507-A |
|
FORD WSS-M2D510-A5 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M2D510-A7 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M2D510-A8 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M2D53-B3 |
FLUOROELASTOMER, OIL SEAL, VALVE STEM, HIGH HEAT, IMPROVED OIL AND ABRASION RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D579-A2 |
POLYVINYL CHLORIDE (PVC), OLEFIN MODIFIED - RIGID - HIGH HEAT - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D582-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), POLYETHYLENE TEREPHTHALATE, HEAT STABILIZED 50% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D627-A2 |
POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-REPLACES SL-M4D9656-A |
|
FORD WSS-M4D628-A2 |
POLYAMIDE (PA) 66 MOLDING COMPOUND, 25% GLASS SPHERE REINFORCED, FIRE RETARDANT, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D649-A4 |
POLYETHELENE (PE) FOAM, CHEMICALLY CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D664-A4 |
POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER/ MINERAL REINFORCED, MINIMUM 25% PCR AND/OR PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D968-A |
|
FORD WSS-M4D682-A6 |
ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR, METALLIC EFFECT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D713-A7 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 4% GLASS/MINERAL FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D726-A3 |
POLYETHYLENE TEREPHTHALATE (PET) 30% GLASS FIBER REINFORCED POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D738-A2 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 30% MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D744-A3 |
ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 19 - 31, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D744-A2 |
|
FORD WSS-M4D777-A8 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) HIGH COLD IMPACT EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D873-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 20% MINERAL FILLED, LOW THERMAL EXPANSION HIGH IMPACT MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M4D873-A3; Use WSS-M4D492-B2 |
|
FORD WSS-M4D928-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED MOLDING COMPOUND, RECYCLATE, 25% MINIMUM RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D950-A1 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU)/ ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D951-A1 |
POLYAMIDE (PA) 66 HEAT STABILIZED, 19% GLASS/MINERAL REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D962-A |
THERMOPLASTIC POLYESTER ELASTOMERIC MOLDING COMPOUND, 20% GLASS FIBER REINFORCED *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D964-A2 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D975-A3 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND AIRBAG COVER, 40 D DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M4D975-A |
|
FORD WSS-M4D977-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 30% GLASS FIBER REINFORCED MOLDING COMPOUND *** TO BE USED WITH FORD WSS-M99P1111-A ***-Shown on WSS-M4D977-A |
|
FORD WSS-M4D983-A |
SPRAY ALIPHATIC POLYURETHANE SKIN *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D994-A |
POLYPROPYLENE (PP) COPOLYMER, 15% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, BLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D996-A1 |
POLYPROPYLENE (PP) COPOLYMER, 20% TALC FILLED, COLOR PIGMENTED, UV STABILIZED, BLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M5D19-A |
ISOCYANATE FOR PUR FOAM SEALS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M5D20-A |
POLYOL FOR PUR FOAM SEALS ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D14-A4 |
HOSE, EPDM RUBBER - RAYON OR POLYESTER REINFORCED, ENGINE COOLANT RESISTANT LOW COMPRESSION SET ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D25-A4 |
HOSE, AIR CONDITIONING REFRIGERANT (VENEER) RESISTANT, LOW-MEDIUM-HIGH PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D33-A6 |
HOSE, REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D42-A |
HOSE, LOW AND HIGH PRESSURE CLUTCH, RUBBER-REINFORCED, BRAKE FLUID DOT 4 AND SUPER DOT 4 (SAE J1704/ISO 4925) RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSS-M96D46-A1 |
HOSE, REINFORCED, DIESEL FUEL RESISTANT, HEAVY-DUTY, ABRASION RESISTANT COVER **TO BE USED WITH FORD WSS-M99-P111-A** |
|
FORD WSS-M98D33-A2 |
TUBE, POLYAMIDE 12 (PA12) COVER, TIE LAYER, ETFE TUBE, HIGH PRESSURE, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A7 |
TUBING, ALLOYED POLYAMIDE COVER, FEP INNER TUBE, NON-CONDUCTIVE, LOW PERMEATING FUEL VAPOR LINE *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSZ-M4D778-A |
ABS, HIGH IMPACT MOLDING COMPOUND, PAINTABLE |
|
FORD WSZ-M4D781-A |
ABS, SELF EXTINGUISHING MOLDING COMPOUND, INTERIOR |
|
FORD WSZ-M4D782-A |
ABS/PC BLEND, SELF EXTINGUISHING MOLDING COMPOUND, INTERIOR |
|
FORD WSZ-M4D787-A |
POLYAMIDE (PA) 6, HEAT STABILIZED, 33% SHORT GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD ESA-M2D17-B |
HOSE, HIGH EXPANSION - POWER STEERING PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D197-A1 |
THERMOPLASTIC POLYURETHANE ELASTOMER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D344-A |
POLYURETHANE ELASTOMER, INJECTION MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D69-A |
RUBBER, NEOPRENE LATEX - COATING - OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M3D73-B |
PHENOLIC MOLDING COMPOUND, FLOCK FILLED - MEDIUM IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D142-A2 |
POLYTETRAFLUOROETHYLENE (PTFE) ELASTOMERIC LUBRICANT, WATER BASE POLYURETHANE BINDER, DIP OR SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D160-C |
HOSE, MEDIUM PRESSURE- AIR CONDITIONING UNITS, NYLON CONSTRUCTION ACID RESISTANT SLEEVE |
|
FORD ESA-M4D182-A |
POLYURETHANE, CAST - 52 DUROMETER |
|
FORD ESA-M4D347-A |
POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D359-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), EXTRUSION MOLDING COMPOUND-Shown on ESA-M4D359-A1 |
|
FORD ESA-M4D396-A |
ACRYLIC, STYRENE MODIFIED |
|
FORD ESA-M4D433-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, BLOW MOLDING COMPOUND |
|
FORD ESA-M4D465-A1 |
TUBING, PTFE - GLASS SPHERE FILLED |
|
FORD ESA-M96D19-A |
HOSE, REINFORCED RUBBER, FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D114-A |
RUBBER - SCRAP TIRE CASING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D155-A |
RUBBER SPONGE SHEET, CLOSED CELL - RECLAIMED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D175-A |
TUBING, UNREINFORCED EPDM - VACUUM LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D260-B |
POLYURETHANE FOAM, SLAB - POLYESTER TYPE, HEAT FORMABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D263-A4 |
POLYURETHANE, MICROCELLULAR ELASTOMER - RIM - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D297-A4 |
POLYURETHANE FOAM, ACOUSTICAL - 80 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D302-A |
SILICONE ELASTOMER, PRELUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D354-A2 |
POLYURETHANE MICROCELLULAR ELASTOMER, 15% GLASS FIBER REINFORCED - RRIM - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D357-A |
SILICONE ELASTOMER, COLOR PIGMENTED - WEATHERABLE - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D67-A |
NEOPRENE, LATEX, DIP COATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D101-A |
POLYESTER RESIN, FIBERGLASS REINFORCED BULK MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D127-A |
POLYESTER RESIN, GLASS FIBER REINFORCED - INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D16-A |
PHENOLIC MOLDING COMPOUND, CELLULOSE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D20-A |
POLYESTER RESIN - FIBERGLASS MAT REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D257-A |
LAMINATE, POLYVINYL CHLORIDE - POLYURETHANE FOAM – METAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D263-C3 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - ELECTRICAL GRADE - SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D263-C4 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - HIGH HEAT - OPTIMUM PROCESSING ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D263-C5 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING COMPOUND - HIGH HEAT - ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D278-A |
NYLON COPOLYMER, EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D279-A |
LAMINATE, POLYVINYL FLOURIDE POLYVINYL CHLORIDE - METAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D297-A3 |
ABS, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D297-A1 |
|
FORD ESB-M4D330-A4 |
IONOMER (ETHYLENE) MOLDING COMPOUND, BLACK - SODIUM TYPE - EXTERIOR GRADE - NOT PAINTABLE-Shown on ESB-M4D330-A1 |
|
FORD ESB-M4D330-A5 |
IONOMER (ETHYLENE) MOLDING COMPOUND, FOAMED GLASS FILLED - BLACK - ZINC/SODIUM TYPE EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D330-A6 |
IONOMER MOLDING COMPOUND, ZINC/SODIUM TYPE - GLASS FIBER MODIFIED - BLACK - EXTERIOR GRADE-Shown on ESB-M4D330-A1 |
|
FORD ESB-M4D345-B |
POLYPROPYLENE SHEET, 40% CONTINUOUS GLASS FIBER REINFORCED |
|
FORD ESB-M4D354-A4 |
POLYBUTYLENE TEREPHTHALATE, 26% GLASS FILLED - SELF EXTINGUISHING - NONPAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D354-A3 |
|
FORD ESB-M4D358-A |
LAMINATE, POLYVINYL CHLORIDE FOAM-POLYVINYL CHLORIDE SKIN - RIGID SUBSTRATE FORMED TRIM ASSEMBLY |
|
FORD ESB-M4D360-A |
TUBING, POLYVINYL CHLORIDE - HEAT SHRINKABLE |
|
FORD ESB-M4D366-A2 |
NYLON (TYPE 6/6), 25% GLASS SPHERE - 15% GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D366-A1 |
|
FORD ESB-M4D382-A |
LAMINATE, VINYL-METAL - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D411-B |
LAMINATE, POLYVINYL CHLORIDE SKIN - POLYVINYL CHLORIDE FOAM, POLYVINYL CHLORIDE SKIN - RIGID SUBSTRATE - FORMED TRIM ASSEMBLY - LOW FOG |
|
FORD ESB-M4D442-A3 |
PC/PBT ALLOY, RUBBER MODIFIED MOLDING COMPOUND - PAINTABLE |
|
FORD ESB-M4D489-A2 |
STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA) RUBBER MODIFIED, 20 % GLASS FIBER/10% ACRYLIC REGRIND REINFORCED |
|
FORD ESB-M4D524-A |
ETHYLENE VINYL ACETATE COPOLYMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D529-A |
POLYETHER BLOCK AMIDE (PEBA) THERMOPLASTIC ELASTOMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D537-A |
POLYPHENYLENE ETHER (PPE), MODIFIED MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D9-A11 |
ACRYLIC (PMMA), HIGH IMPACT RESISTANT, EXTERIOR - OPTICAL GRADE |
|
FORD ESB-M98D17-A2 |
LAMINATE, METALLIZED POLYESTER/PVC **TO BE USED WITH FORD WSS-M99P1111-A**-Shown on ESB-M98D17-A1 |
|
FORD ESB-M98D17-A3 |
LAMINATE, METALLIZED POLYESTER/PVC **TO BE USED WITH FORD WSS-M99P1111-A**-Shown on ESB-M98D17-A1 |
|
FORD ESB-M98D9-A |
LAMINATE, POLYVINYL CHLORIDE/METAL - INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M2D372-A2 |
RUBBER- CARBOXYLATED NITRILE (XNBR) ABRASION, HOT OIL AND HOT TEAR RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M96D5-A |
DRIVE BELT, TOOTHED, DOUBLE FABRIC HEAVY DUTY ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M96D7-A2 |
HOSE- SILICONE (VMQ) RUBBER, REINFORCED- VACUUM COLLAPSE RESISTANT, MEDIUM TEMPERATURE RESISTANT ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D147-A |
HOSE, RUBBER-OZONE RESISTANT COVER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D158-A |
TUBING, CHLOROSULFONATED POLYETHYLENE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D158-B |
RUBBER, CHLOROSULFONATED POLYETHYLENE LOW EXTRACTABLES ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D165-B |
RUBBER GROMMETS, EMISSION VALVE - OIL, HEAT AND OZONE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D190-A |
SEAL, RADIATOR CAP - NBR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D232-A |
EPICHLOROHYDRIN, RUBBER - 70 DUROMETER |
|
FORD ESE-M2D241-A |
TUBING, EPICHLOROHYDRIN RUBBER - FUEL AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D249-A |
TUBING, SILICONE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D286-A |
HOSE, REINFORCED RUBBER - FUEL LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D316-A |
TUBING, EPDM - SHORT FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D326-A |
RUBBER, HIGH TEMPERATURE, ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D338-A2 |
FLUOROELASTOMER, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESE-M2D338-A1 |
|
FORD ESE-M2D345-A1 |
HOSE, SILICONE - HIGH TEMPERATURE - COOLANT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D347-A |
SILICONE RUBBER, HIGH TEMPERATURE - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M2D272-A |
SEAL, NITRILE BUTADIENE RUBBER - REFRIGERANT AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M2D318-A |
EPDM SPONGE, SOUND DEADENING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M2D346-A |
POLYURETHANE FOAM, SOUND DEADENING - DIE CUT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESH-M4D291-D |
POLYURETHANE FOAM, RESTRICTED FLOW - FLEXIBLE DIE CUT - WITHOUT ADHESIVE BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESH-M4D291-C |
|
FORD ESH-M4D292-A2 |
TUBING, POLYVINYL CHLORIDE - VACUUM LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D333-A |
POLYACRYLIC RUBBER FOR OIL PAN GASKETS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D351-A |
PUR FOAM, MOULDED, ENERGY ABSORBING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D361-A2 |
POLYURETHANE (PUR) FOAM, MOLDED, ENERGY ABSORBING, LOW DENSITY, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D367-A1 |
POLYURETHANE (PUR) FOAM, MOLDED-RIGID 500 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M2D368-A |
POLYACRYLIC RUBBER (ACM), LIP SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M4D538-A |
POLYPROPYLENE, COOLING AGENT AND HEAT STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D638-B |
|
FORD ESK-M5D13-A |
POLYOL FOR ENERGY ABSORBING PUR FOAM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESK-M96D3-A |
PUR FOAM MOULDED, RIGID, GLASS FIBER MAT REINFORCED |
|
FORD ESP-M2D294-A3 |
FLUOROELASTOMER (FKM) ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESP-M2D336-A |
NITRILE BUTADIENE RUBBER, OIL SEAL - AUTOMATIC TRANSMISSION - HIGH SWELLING - HIGH TEMPERATURE SERVICE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESP-M4D342-A |
NYLON (TYPE 6/6), MONOFILAMENT THREAD |
|
FORD EST-M2D81-A |
HOSE, MEDIUM PRESSURE - HIGH TEMPERATURE OIL RESISTANT ONE WIRE BRAID ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESW-M2D230-A1 |
ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD NOTICE 1 |
IMPORTANT NOTICE -- New Material Specification, WSS-M99P1111-A, Standard Requirements for Production Materials. |
|
FORD SJ-M98D9610-A |
POLYCARBONATE FILM, TRANSLUCENT |
|
FORD SK-M3D9600-A |
HOT STAMPING FILM ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SK-M98D9594-A |
ABS/PVC SHEETING, FOAM BACKED |
|
FORD SK-M98D9600-B |
POLYPROPYLENE SHEET, 40% WOOD FLOUR FILLED***TO BE USED WITH FORD WSS-M99-P1111-A***-Shown on SK-M98D9600-A |
|
FORD S-M2D4523-A |
WEATHERSTRIP, TUBULAR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M3D1009-A |
GLASS FIBER REINFORCED POLYESTER RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD S-M98D4509-A |
PVC TRIM WELT |
|
FORD S-M98D4530-A |
NON-ADHESIVE PVC TAPE *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD S-M98D4535-A |
PROTECTION PAD *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD SQ-M2D9027-A |
CHLOROPRENE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SQ-M2D9509-A |
FLUORO ELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD SQ-M2D9517-A |
POLYACRYLIC RUBBER, HIGH HEAT AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M3D173-A3 |
VINYL ESTER (VE), MODIFIED, 35% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSA-M4D688-A2 |
ABS + POLYCARBONATE BLEND (ABS+PC), IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSA-M4D688-A1 |
|
FORD WSA-M96D26-A |
HOSE, REINFORCED RUBBER, AUTOMATIC TRANSMISSION FLUID RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D203-A2 |
POLYURETHANE FOAM, INTEGRAL SKIN PAINTED FORMED ASSEMBLY, NON-CRITICAL AREAS, FUNCTIONAL PARTS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D386-A1 |
SILICONE ELASTOMER (MQ), INHERENTLY LUBRICATED - LIQUID INJECTION MOLDING (LIM) COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M2D409-A |
POLYURETHANE (PUR) FOAM, ACOUSTICAL, 64 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M3D171-A1 |
UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND, 8% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D619-A2 |
POLYPROPYLENE (PP) SHEET, 30% LONG GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D619-A1 |
|
FORD WSB-M4D624-A |
POLYBUTYLENE TEREPHTHALATE (PBT), IMPACT MODIFIED MOLDING COMPOUND, 30% MINERAL/GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D640-A |
POLYPROPYLENE (PP), IMPACT MODIFIED 35% CHEMICALLY COUPLED GLASS FIBER/MINERAL REINFORCED, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D662-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, 20% PTFE POWDER FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D679-A |
POLYAMIDE (PA) 66, 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D677-A |
|
FORD WSB-M4D723-A |
POLYVINYL CHLORIDE (PVC), FLEXIBLE FOAMED EXTRUSION ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D732-A4 |
POLYPROPYLENE (PP) HOMOPOLYMER, GLASS FIBER/MICA REINFORCED MOLDING COMPOUND |
|
FORD WSB-M4D733-A3 |
ETHYLENE VINYL ACETATE (E/VAC) COPOLYMER MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D733-A4 |
ETHYLENE VINYL ACETATE (E/VAC) COPOLYMER MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D766-A |
POLYETHYLENE TEREPHTHALATE (PET), 35% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D780-A |
POLYVINYL CHLORIDE (PVC), FLEXIBLE, 87 DUROMETER A HARDNESS MOLDING COMPOUND, EXTERIOR, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D831-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 65 DUROMETER D HARDNESS MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSB-M4D835-A |
POLYARYLSULFONE (PAS) MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSB-M4D861-A |
POLYPHTHALAMIDE (PPA), 45 % GLASS FIBER REINFORCED HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D862-A |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 60 D HARDNESS, 15 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D865-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 50% LONG GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D866-A2 |
ABS + POLYCARBONATE (ABS +PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSB-M4D866-A1 |
|
FORD WSB-M4D868-A |
POLYETHYLENE TEREPHTHALATE (PET), 37 % GLASS FIBER REINFORCED MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D874-A |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 80 DUROMETER A HARDNESS, REMANUFACTURED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D882-A1 |
ACETAL (POM) COPOLYMER, 10% GLASS FIBER REINFORCED MOLDING COMPOUND |
|
FORD WSB-M4D914-A |
POLYCYCLOHEXYLENE DIMETHYLENE TEREPHTHALATE (PCT) 30 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSB-M4D918-A |
POLYPHENYLENE SULFIDE (PPS), 33 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D393-A2 |
SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, HIGH ELONGATION, 45 HARDNESS (IRHD), LONG-LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D405-A2 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 70 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D405-A1 |
|
FORD WSD-M2D405-A4 |
RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 90 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D405-A1 |
|
FORD WSD-M2D420-A2 |
RUBBER, POLYCHLOROPRENE (CR) LOW TEMPERATURE FLEXIBLE, 60 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D428-A |
THERMOPLASTIC POLYESTER ETHER ELASTOMER (TEEE), 45 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D440-A |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT, METHANOL RESISTANT, 80 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M2D440-A3 |
FLUOROELASTOMER (FKM), 75 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D16-A |
DRIVE BELT, TOOTHED - POLYCHLOROPRENE RUBBER (CR) - PARA-ARAMID TENSION CORDS - SINGLE FACING FABRIC ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A1 |
WEATHERSTRIP, ETHYLENE/PROPYLENE (EPDM) RUBBER, THERMOPLASTIC POLYOLEFIN (TPO) CO-EXTRUDED SLIDING-COAT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D21-A2 |
WEATHERSTRIP, ETHYLENE/PROPYLENE (EPDM) RUBBER, SHORT FIBRE FLOCK COATED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSD-M96D21-A1 |
|
FORD WSD-M96D32-A |
HOSE, NITRILE (NBR) OR PVC/NITRILE (PVC/NBR) RUBBER, EXTERNALLY REINFORCED OXYGENATED FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D9-A |
TUBE, EPICHLOROHYDRIN (ECO) RUBBER, FUEL AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSD-M96D9-A2 |
TUBE, EPICHLOROHYDRIN (ECO) RUBBER, FUEL, OIL AND ACIDIC AQUEOUS CONDENSATE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M96D9-A |
|
FORD WSE-M2D370-A |
POLYACRYLATE (ACM) RUBBER, GROMMET LONG LIFE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D391-A2 |
FLUOROELASTOMER (FKM), HIGH TEMPERATURE ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D401-A3 |
FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT, COMPRESSION STRESS RELAXATION RESISTANT, LOW TEMPERATURE RESISTANT, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSD-M2D401-A |
|
FORD WSE-M2D418-A2 |
SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, OIL GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D434-A |
FLUOROELASTOMER (FKM), ARAMID FIBERS REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D451-A |
HYDROGENATED NITRILE (HNBR) RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M2D470-A4 |
DUCT, ECO, EPICHLOROHYDRIN, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M2D470-A1 |
|
FORD WSE-M2D53-A4 |
FLUOROELASTOMER (FKM), VALVE STEM SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D14-A1 |
HOSE, EPDM RUBBER - PARA-ARAMID FIBERS REINFORCED - ENGINE COOLANT AND STEAM RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSE-M96D14-A2 |
HOSE, EPDM RUBBER - META- ARAMID FIBERS REINFORCED -, ENGINE COOLANT AND STEAM RESISTANT ***TO USED WITH FORD WSS-M99P1111-A***-Shown on WSE-M96D14-A1 |
|
FORD WSE-M96D38-A1 |
HOSE, COOLANT, STRAIGHT, FORMED, OR BRANCHED HOSE, EPDM RUBBER, PARA-ARAMID FIBER REINFORCED, ENGINE COOLANT AND ELECTROCHEMICAL DEGRADATION RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSE-M96D39-A |
HOSE, SILICONE (VMQ), HIGH TEMPERATURE, OIL RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSF-M4D620-A |
POLYETHYLENE TEREPHTHALATE (PET), 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D628-A |
POLYAMIDE (PA) 66 MOLDING COMPOUND, 25% GLASS FIBER REINFORCED, FIRE RETARDED |
|
FORD WSF-M4D629-A |
POLYETHYLENE TEREPHTHALATE (PET) MOLDING COMPOUND, 15% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D757-A |
POLYCARBONATE (PC), 12.5% TI02 FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D767-A |
POLYCARBONATE + THERMOPLASTIC COPOLYESTER BLEND (PC + PCTA) FILM, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSF-M4D803-A2 |
POLYPHENYLENE SULFIDE (PPS), 65% GLASS FIBER/ MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M4D669-A2 |
POLYAMIDE (PA) 66, HEAT STABILIZED, 13% GLASS FIBER REINFORCED 100% POST INDUSTRIAL OR 25% POST CONSUMER RECYCLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-No Replacement |
|
FORD WSH-M4D724-A3 |
STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER, RUBBER MODIFIED, 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSH-M4D832-A |
POLYPROPYLENE (PP) HOMOPOLYMER, 10% WOLLASTONITE FILLED MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSH-M4D888-A1 |
POLYETHYLENE TEREPHTHALATE (PET), 45% GLASS FIBER REINFORCED MOLDING COMPOUND, 100% RECYCLED |
|
FORD WSK-M2D389-A2 |
POLYURETHANE (PUR) FOAM, OPEN CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D391-A |
FLUOROELASTOMER (FKM) ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D402-A1 |
POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***-USE WSB-M2D402-A3 |
|
FORD WSK-M2D415-A4 |
POLYURETHANE (PUR) FOAM, MOLDED SEMIRIGID, 160 kg/m3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D426-A |
NITRILE BUTADIENE (NBR) RUBBER ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D427-A |
FLUOROELASTOMER (FKM), ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D427-A2 |
FLUOROELASTOMER (FKM), ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D429-A |
POLYURETHANE (PUR) MICROCELLULAR ELASTOMER, REINFORCED REACTION INJECTION MOLDED (RRIM), 20% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M2D458-A |
FLUOROELASTOMER (FKM), ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D590-A |
POLYAMIDE (PA) 66, IMPACT MODIFIED, 14% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D591-A |
|
FORD WSK-M4D592-A |
POLYETHERSULFONE (PES), SE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D607-A |
POLYBUTYLENE TEREPHTHALATE (PBT) 30% GLASS FIBRE REINFORCED IMPACT MODIFIED MOLDING COMPOUND |
|
FORD WSK-M4D613-A2 |
POLYAMIDE 11 (PA11), RIGID, HEAT STABILISED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D623-A |
POLYPHENYLENE ETHER + POLYAMIDE (PPE+PA) BLEND MOLDING COMPOUND, IMPACT MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D623-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D625-A |
POLYBUTHYLENE TEREPHTHALATE (PBT) 40% GLASS FIBER/MINERAL REINFORCED LOW WARPAGE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D626-A1 |
POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT, SE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D635-A3 |
ACETAL (POM) COPOLYMER, MELT FLOW RATE 23 - 35 ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D635-A1 |
|
FORD WSK-M4D637-A5 |
ACETAL (POM) HOMOPOLYMER, CHEMICALLY LUBRICATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D639-A |
POLYBUTYLENE TEREPHTHALATE (PBT) EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D646-A |
POLYVINYL CHLORIDE (PVC), RIGID MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D654-A |
POLYAMIDE (PA) 66, HEAT STABILIZED, 40% GLASS SPHERE REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D654-A2 |
|
FORD WSK-M4D674-A |
POLYAMIDE (PA) 6, HEAT STABILIZED 50% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D675-A |
ETHYLENE VINYL ACETATE (EVAC) FOAM CROSSLINKED, CLOSED CELL, 30 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D676-A10 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 95 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A4 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 65 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A5 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 70 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A6 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 75 A HARDNESS-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A8 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 85 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D676-A9 |
POLYVINYL CHLORIDE (PVC), FLEXIBLE 90 A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D676-A1 |
|
FORD WSK-M4D694-A |
THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE), 63 DUROMETER D HARDNESS MOLDING COMPOUND |
|
FORD WSK-M4D702-A |
ACETAL (POM) COPOLYMER, MINERAL OIL IMPREGNATED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D709-A |
ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, HIGH IMPACT AND HIGH TENSILE STRENGTH-REPLACES SK-M4D9793-A/B |
|
FORD WSK-M4D716-A |
POLYETHERIMIDE (PEI) MOLDING COMPOUND, SELF-EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D722-A2 |
ABS, 7 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D737-A3 |
POLYBUTYLENE TEREPHTHALATE (PBT) MODIFIED, 30% GLASS FIBER REINFORCED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D737-A2 |
|
FORD WSK-M4D739-A |
POLYAMIDE (PA) 12, RIGID, HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D739-A2 |
POLYAMIDE (PA) 12, RIGID, HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D739-A3 |
POLYAMIDE 12 (PA12), RIGID, HEAT STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D739-A4 |
POLYAMIDE 12 (PA12), RIGID, HIGH HEAT STABILIZED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D740-A |
ABS/PVC BLEND, VACUUM FORMABLE SHEET |
|
FORD WSK-M4D741-A1 |
POLYPROPYLENE (PP) COPOLYMER COOLING AGENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D969-A |
|
FORD WSK-M4D741-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER COOLING AGENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D753-A |
POLYBUTYLENE TEREPHTHALATE (PBT), MODIFIED, 20% GLASS FIBER REINFORCED MOLDING COMPOUND, EXTERIOR |
|
FORD WSK-M4D755-A3 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), 65 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D758-A2 |
POLYPROPYLENE (PP) HOMOPOLYMER, 30% MINERAL FILLED, SELF-EXTINGUISHING MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D763-A1 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED, VERY EASY FLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D763-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED, EASY FLOW MOLDING COMPOUND, EXTERIOR-REPLACES ESK-M4D544-A1; ESK-M4D441-A |
|
FORD WSK-M4D763-A3 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED, EASY FLOW MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D763-A5 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED, EASY FLOW, HEAT OPTIMIZED MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D763-A3 |
|
FORD WSK-M4D771-A |
POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D773-A2 |
POLYARYLSULFONE (PAS), HEAT STABILIZED, 20 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D789-A |
POLYBUTYLENE TEREPHTHALATE + POLYCARBONATE BLEND (PBT +PC), 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D789-A2 |
POLYBUTYLENE TEREPHTHALATE + POLYCARBONATE BLEND (PBT +PC), 10 % GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D817-A |
PERFLUORO ALKOXY (PFA) COPOLYMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D818-A |
POLYPROPYLENE (PP) SHEET, 40% CONTINUOUS GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D837-A |
POLYBUTYLENE TEREPHTHALATE (PBT), 20% GLASS SPHERE FILLED MOLDING COMPOUND |
|
FORD WSK-M4D838-A |
POLYETHERETHERKETONE (PEEK), SELF-EXTINGUISHING (SE) MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A ** |
|
FORD WSK-M4D848-A |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT) SHEET, 30 % LONG GLASS FIBERS REINFORCED |
|
FORD WSK-M4D852-A |
ACETAL (POM) COPOLYMER, MOLYBDENUM DISULPHIDE FILLED MOLDING COMPOUND |
|
FORD WSK-M4D858-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED MOLDING COMPOUND, RECYCLATE, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D876-A2 |
ABS, HIGH HEAT RESISTANT, HIGH IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D876-A1 |
|
FORD WSK-M4D890-A1 |
POLYAMIDE 12 (PA 12) COPOLYMER, AMORPHOUS MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D893-A1 |
THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 66 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D902-A |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 20% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M4D905-A2 |
ABS, HIGH IMPACT STRENGTH EXTRUSION MOLDING COMPOUND, INTERIOR-Shown on WSK-M4D905-A1 |
|
FORD WSK-M4D916-A |
POLYAMIDE 46 (PA46), 30% GLASS SPHERE REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSK-M97D2-A |
PHENOLIC (PF), 40 % GLASS FIBER REINFORCED SHEET **TO BE USED WITH FORD WSS-M99P111-A** |
|
FORD WSK-M98D23-A |
PVC/METALLIZED POLYESTER FILM/PVC LAMINATE DECORATIVE COEXTRUSION MOLDING **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSK-M98D25-A |
POLYPROPYLENE (PP) SHEET, 50% WOOD FLOUR FILLED **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSL-M96D33-A |
HOSE, REINFORCED RUBBER, FUEL RESISTANT, STATIC CONDUCTIVE |
|
FORD WSL-M96D33-A5 |
HOSE, NON-REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTING, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSL-M96D35-A |
ENERGY ABSORBING COMPOSITE, HOLLOW CERAMIC SPHERES WITH BINDER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D375-A |
ETHYLENE/ACRYLIC (AEM) RUBBER, AUTOMATIC TRANSMISSION FLUID RESISTANT, FILTER GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSP-M2D455-A2 |
FLUOROELASTOMER (FPM), OIL RESISTANT ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSP-M2D455-A |
|
FORD WSS-M2D476-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 100% RECYCLED RUBBER MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D476-A5 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50% MINIMUM RECYCLED CONTENT, HARDNESS 80 DUROMETER A ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D476-A3 |
|
FORD WSS-M2D476-A8 |
THERMOPLASTIC ELASTOMER, POLYPROPYLENE, SBR/NR (50% TYRE CRUMB) 81 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS. 65% POST CONSUMER RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D484-A |
POLYURETHANE (PUR) FOAM, MOLDED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D488-A1 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 50 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D488-A2 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 50 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D489-A1 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D489-A2 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D489-A3 |
SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, HIGH ELONGATION, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D492-A2 |
STYRENE BUTADIENE RUBBER (SBR) AND POLYMER BINDER, DIE CUT SHEET, POST CONSUMER RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D496-A4 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D496-A7 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D496-A9 |
POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D496-A1 |
|
FORD WSS-M2D498-A2 |
POLYURETHANE FOAM, OPEN CELL - RETICULATED, 18 CELLS/10 MM ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D498-A1 |
|
FORD WSS-M2D501-A |
THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D502-A |
POLYURETHANE (PUR) FOAM, MICROCELLULAR, SHOCK AND VIBRATION ISOLATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D505-A3 |
THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 70 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D505-A6 |
THERMOPLASTIC ELASTOMER, POLYOLEFIN EP RUBBER MODIFIED (TEO), 55 DUROMETER D HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M2D507-A3 |
THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 75 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M2D507-A |
|
FORD WSS-M2D510-A5 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M2D510-A7 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M2D510-A8 |
THERMOPLASTIC ELASTOMER, OLEFINICS (TEO), EPDM MODIFIED INTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on FORD WSS-M2D510-A4 |
|
FORD WSS-M2D53-B3 |
FLUOROELASTOMER, OIL SEAL, VALVE STEM, HIGH HEAT, IMPROVED OIL AND ABRASION RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D579-A2 |
POLYVINYL CHLORIDE (PVC), OLEFIN MODIFIED - RIGID - HIGH HEAT - EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D582-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), POLYETHYLENE TEREPHTHALATE, HEAT STABILIZED 50% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D627-A2 |
POLYCARBONATE (PC) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-REPLACES SL-M4D9656-A |
|
FORD WSS-M4D628-A2 |
POLYAMIDE (PA) 66 MOLDING COMPOUND, 25% GLASS SPHERE REINFORCED, FIRE RETARDANT, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D649-A4 |
POLYETHELENE (PE) FOAM, CHEMICALLY CROSSLINKED, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D664-A4 |
POLYAMIDE (PA) 6, HEAT STABILIZED 30% GLASS FIBER/ MINERAL REINFORCED, MINIMUM 25% PCR AND/OR PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSS-M4D968-A |
|
FORD WSS-M4D682-A6 |
ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC), HIGH HEAT RESISTANT MOLDING COMPOUND, INTERIOR, METALLIC EFFECT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D713-A7 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 4% GLASS/MINERAL FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D726-A3 |
POLYETHYLENE TEREPHTHALATE (PET) 30% GLASS FIBER REINFORCED POST CONSUMER RECYCLATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D738-A2 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 30% MINERAL/GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D744-A3 |
ACETAL (POM) HOMOPOLYMER, COLOR PIGMENTED MOLDING COMPOUND, MELT FLOW RATE 19 - 31, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSK-M4D744-A2 |
|
FORD WSS-M4D777-A8 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) HIGH COLD IMPACT EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D873-A4 |
THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 20% MINERAL FILLED, LOW THERMAL EXPANSION HIGH IMPACT MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M4D873-A3; Use WSS-M4D492-B2 |
|
FORD WSS-M4D928-A2 |
POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED MOLDING COMPOUND, RECYCLATE, 25% MINIMUM RECYCLED CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D950-A1 |
THERMOPLASTIC POLYURETHANE ELASTOMER (TPU)/ ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D951-A1 |
POLYAMIDE (PA) 66 HEAT STABILIZED, 19% GLASS/MINERAL REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D962-A |
THERMOPLASTIC POLYESTER ELASTOMERIC MOLDING COMPOUND, 20% GLASS FIBER REINFORCED *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D964-A2 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D975-A3 |
THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND AIRBAG COVER, 40 D DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on WSS-M4D975-A |
|
FORD WSS-M4D977-A2 |
POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 30% GLASS FIBER REINFORCED MOLDING COMPOUND *** TO BE USED WITH FORD WSS-M99P1111-A ***-Shown on WSS-M4D977-A |
|
FORD WSS-M4D983-A |
SPRAY ALIPHATIC POLYURETHANE SKIN *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSS-M4D994-A |
POLYPROPYLENE (PP) COPOLYMER, 15% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, BLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M4D996-A1 |
POLYPROPYLENE (PP) COPOLYMER, 20% TALC FILLED, COLOR PIGMENTED, UV STABILIZED, BLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M5D19-A |
ISOCYANATE FOR PUR FOAM SEALS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M5D20-A |
POLYOL FOR PUR FOAM SEALS ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D14-A4 |
HOSE, EPDM RUBBER - RAYON OR POLYESTER REINFORCED, ENGINE COOLANT RESISTANT LOW COMPRESSION SET ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D25-A4 |
HOSE, AIR CONDITIONING REFRIGERANT (VENEER) RESISTANT, LOW-MEDIUM-HIGH PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D33-A6 |
HOSE, REINFORCED RUBBER, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M96D42-A |
HOSE, LOW AND HIGH PRESSURE CLUTCH, RUBBER-REINFORCED, BRAKE FLUID DOT 4 AND SUPER DOT 4 (SAE J1704/ISO 4925) RESISTANT **TO BE USED WITH FORD WSS-M99P1111-A** |
|
FORD WSS-M96D46-A1 |
HOSE, REINFORCED, DIESEL FUEL RESISTANT, HEAVY-DUTY, ABRASION RESISTANT COVER **TO BE USED WITH FORD WSS-M99-P111-A** |
|
FORD WSS-M98D33-A2 |
TUBE, POLYAMIDE 12 (PA12) COVER, TIE LAYER, ETFE TUBE, HIGH PRESSURE, FUEL/ALCOHOL RESISTANT, CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD WSS-M98D33-A7 |
TUBING, ALLOYED POLYAMIDE COVER, FEP INNER TUBE, NON-CONDUCTIVE, LOW PERMEATING FUEL VAPOR LINE *** TO BE USED WITH FORD WSS-M99P1111-A *** |
|
FORD WSZ-M4D778-A |
ABS, HIGH IMPACT MOLDING COMPOUND, PAINTABLE |
|
FORD WSZ-M4D781-A |
ABS, SELF EXTINGUISHING MOLDING COMPOUND, INTERIOR |
|
FORD WSZ-M4D782-A |
ABS/PC BLEND, SELF EXTINGUISHING MOLDING COMPOUND, INTERIOR |
|
FORD WSZ-M4D787-A |
POLYAMIDE (PA) 6, HEAT STABILIZED, 33% SHORT GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Use WSK-M4D673-A |
|
FORD ESA-M2D17-B |
HOSE, HIGH EXPANSION - POWER STEERING PRESSURE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D197-A1 |
THERMOPLASTIC POLYURETHANE ELASTOMER, 80 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D344-A |
POLYURETHANE ELASTOMER, INJECTION MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M2D69-A |
RUBBER, NEOPRENE LATEX - COATING - OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M3D73-B |
PHENOLIC MOLDING COMPOUND, FLOCK FILLED - MEDIUM IMPACT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D142-A2 |
POLYTETRAFLUOROETHYLENE (PTFE) ELASTOMERIC LUBRICANT, WATER BASE POLYURETHANE BINDER, DIP OR SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D160-C |
HOSE, MEDIUM PRESSURE- AIR CONDITIONING UNITS, NYLON CONSTRUCTION ACID RESISTANT SLEEVE |
|
FORD ESA-M4D182-A |
POLYURETHANE, CAST - 52 DUROMETER |
|
FORD ESA-M4D347-A |
POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESA-M4D359-A2 |
POLYBUTYLENE TEREPHTHALATE (PBT), EXTRUSION MOLDING COMPOUND-Shown on ESA-M4D359-A1 |
|
FORD ESA-M4D396-A |
ACRYLIC, STYRENE MODIFIED |
|
FORD ESA-M4D433-A2 |
THERMOPLASTIC POLYOLEFIN ELASTOMER, BLOW MOLDING COMPOUND |
|
FORD ESA-M4D465-A1 |
TUBING, PTFE - GLASS SPHERE FILLED |
|
FORD ESA-M96D19-A |
HOSE, REINFORCED RUBBER, FUEL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D114-A |
RUBBER - SCRAP TIRE CASING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D155-A |
RUBBER SPONGE SHEET, CLOSED CELL - RECLAIMED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D175-A |
TUBING, UNREINFORCED EPDM - VACUUM LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D260-B |
POLYURETHANE FOAM, SLAB - POLYESTER TYPE, HEAT FORMABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D263-A4 |
POLYURETHANE, MICROCELLULAR ELASTOMER - RIM - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D297-A4 |
POLYURETHANE FOAM, ACOUSTICAL - 80 KG/M3 ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D302-A |
SILICONE ELASTOMER, PRELUBRICATED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D354-A2 |
POLYURETHANE MICROCELLULAR ELASTOMER, 15% GLASS FIBER REINFORCED - RRIM - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D357-A |
SILICONE ELASTOMER, COLOR PIGMENTED - WEATHERABLE - EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M2D67-A |
NEOPRENE, LATEX, DIP COATING ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D101-A |
POLYESTER RESIN, FIBERGLASS REINFORCED BULK MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D127-A |
POLYESTER RESIN, GLASS FIBER REINFORCED - INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D16-A |
PHENOLIC MOLDING COMPOUND, CELLULOSE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M3D20-A |
POLYESTER RESIN - FIBERGLASS MAT REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D257-A |
LAMINATE, POLYVINYL CHLORIDE - POLYURETHANE FOAM – METAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D263-C3 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - ELECTRICAL GRADE - SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D263-C4 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - HIGH HEAT - OPTIMUM PROCESSING ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D263-C5 |
POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING COMPOUND - HIGH HEAT - ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D263-C1; |
|
FORD ESB-M4D278-A |
NYLON COPOLYMER, EXTRUSION GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D279-A |
LAMINATE, POLYVINYL FLOURIDE POLYVINYL CHLORIDE - METAL ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D297-A3 |
ABS, 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D297-A1 |
|
FORD ESB-M4D330-A4 |
IONOMER (ETHYLENE) MOLDING COMPOUND, BLACK - SODIUM TYPE - EXTERIOR GRADE - NOT PAINTABLE-Shown on ESB-M4D330-A1 |
|
FORD ESB-M4D330-A5 |
IONOMER (ETHYLENE) MOLDING COMPOUND, FOAMED GLASS FILLED - BLACK - ZINC/SODIUM TYPE EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D330-A6 |
IONOMER MOLDING COMPOUND, ZINC/SODIUM TYPE - GLASS FIBER MODIFIED - BLACK - EXTERIOR GRADE-Shown on ESB-M4D330-A1 |
|
FORD ESB-M4D345-B |
POLYPROPYLENE SHEET, 40% CONTINUOUS GLASS FIBER REINFORCED |
|
FORD ESB-M4D354-A4 |
POLYBUTYLENE TEREPHTHALATE, 26% GLASS FILLED - SELF EXTINGUISHING - NONPAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D354-A3 |
|
FORD ESB-M4D358-A |
LAMINATE, POLYVINYL CHLORIDE FOAM-POLYVINYL CHLORIDE SKIN - RIGID SUBSTRATE FORMED TRIM ASSEMBLY |
|
FORD ESB-M4D360-A |
TUBING, POLYVINYL CHLORIDE - HEAT SHRINKABLE |
|
FORD ESB-M4D366-A2 |
NYLON (TYPE 6/6), 25% GLASS SPHERE - 15% GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESB-M4D366-A1 |
|
FORD ESB-M4D382-A |
LAMINATE, VINYL-METAL - EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D411-B |
LAMINATE, POLYVINYL CHLORIDE SKIN - POLYVINYL CHLORIDE FOAM, POLYVINYL CHLORIDE SKIN - RIGID SUBSTRATE - FORMED TRIM ASSEMBLY - LOW FOG |
|
FORD ESB-M4D442-A3 |
PC/PBT ALLOY, RUBBER MODIFIED MOLDING COMPOUND - PAINTABLE |
|
FORD ESB-M4D489-A2 |
STYRENE MALEIC ANHYDRIDE COPOLYMER (SMA) RUBBER MODIFIED, 20 % GLASS FIBER/10% ACRYLIC REGRIND REINFORCED |
|
FORD ESB-M4D524-A |
ETHYLENE VINYL ACETATE COPOLYMER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D529-A |
POLYETHER BLOCK AMIDE (PEBA) THERMOPLASTIC ELASTOMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D537-A |
POLYPHENYLENE ETHER (PPE), MODIFIED MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESB-M4D9-A11 |
ACRYLIC (PMMA), HIGH IMPACT RESISTANT, EXTERIOR - OPTICAL GRADE |
|
FORD ESB-M98D17-A2 |
LAMINATE, METALLIZED POLYESTER/PVC **TO BE USED WITH FORD WSS-M99P1111-A**-Shown on ESB-M98D17-A1 |
|
FORD ESB-M98D17-A3 |
LAMINATE, METALLIZED POLYESTER/PVC **TO BE USED WITH FORD WSS-M99P1111-A**-Shown on ESB-M98D17-A1 |
|
FORD ESB-M98D9-A |
LAMINATE, POLYVINYL CHLORIDE/METAL - INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M2D372-A2 |
RUBBER- CARBOXYLATED NITRILE (XNBR) ABRASION, HOT OIL AND HOT TEAR RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M96D5-A |
DRIVE BELT, TOOTHED, DOUBLE FABRIC HEAVY DUTY ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESD-M96D7-A2 |
HOSE- SILICONE (VMQ) RUBBER, REINFORCED- VACUUM COLLAPSE RESISTANT, MEDIUM TEMPERATURE RESISTANT ***TO USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D147-A |
HOSE, RUBBER-OZONE RESISTANT COVER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D158-A |
TUBING, CHLOROSULFONATED POLYETHYLENE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D158-B |
RUBBER, CHLOROSULFONATED POLYETHYLENE LOW EXTRACTABLES ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D165-B |
RUBBER GROMMETS, EMISSION VALVE - OIL, HEAT AND OZONE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D190-A |
SEAL, RADIATOR CAP - NBR ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D232-A |
EPICHLOROHYDRIN, RUBBER - 70 DUROMETER |
|
FORD ESE-M2D241-A |
TUBING, EPICHLOROHYDRIN RUBBER - FUEL AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D249-A |
TUBING, SILICONE RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D286-A |
HOSE, REINFORCED RUBBER - FUEL LINE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D316-A |
TUBING, EPDM - SHORT FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D326-A |
RUBBER, HIGH TEMPERATURE, ELECTRICAL GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D338-A2 |
FLUOROELASTOMER, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***-Shown on ESE-M2D338-A1 |
|
FORD ESE-M2D345-A1 |
HOSE, SILICONE - HIGH TEMPERATURE - COOLANT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
FORD ESE-M2D347-A |
SILICONE RUBBER, HIGH TEMPERATURE - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** |
|
|
AUTOMOTIVE ENGINEERING STANDARDS NEWS
|
|
|