|
GME QK 000000 |
Information for Handling of Technical Terms of Delivery for Plastics |
|
GME QK 000023 |
Ethylene-Acrylic Acid-Copolymer |
|
GME QK 000168 |
Polycarbonate-English/German |
|
GME QK 000169 |
Polycarbonate - Moulding Compounds, UV- and Thermo Stabilized |
|
GME QK 000170 |
Blend from PC and PBT-English/German |
|
GME QK 000171 |
Polycarbonate-English/German |
|
GME QK 000172 |
Acrylic Ester-Styrene-Acrylonitrile-Terpolymer |
|
GME QK 000173 |
Polycarbonate, High Flame Retardant-Replaced by QK 005922 F (see QK 005900) |
|
GME QK 000174 |
Polycarbonate - Moulding Compounds, Standard Quality-Replaced by QK 000186 |
|
GME QK 000175 |
Polycarbonate |
|
GME QK 000176 |
Polycarbonate-Replaced by QK 005941; English Translation Available |
|
GME QK 000177 |
Polycarbonate-English/German |
|
GME QK 000178 |
Polycarbonate - Moulding Compound with 10 % by Mass Glass Fibres |
|
GME QK 000179 |
Polycarbonate with Glass Fibres-English/German |
|
GME QK 000180 |
Polyphenylene Oxide, Modified |
|
GME QK 000181 |
Polyphenylene Oxide, Modified |
|
GME QK 000182 |
Polyphenylene Oxide, Modified |
|
GME QK 000183 |
Polyphenylene Oxide, Modified with 20 % by Mass Glass Fibres |
|
GME QK 000184 |
Polycarbonate - Moulding Compound with 20 % by Mass Glass Fibres |
|
GME QK 000185 |
Polycarbonate - Moulding Compound Low Melting Viscosity |
|
GME QK 000186 |
Polycarbonate-English Translation Available |
|
GME QK 000187 |
Polycarbonate-English/German |
|
GME QK 000188 |
Blend from PC and ABS |
|
GME QK 000190 |
Polyphenylene Oxide, Modified |
|
GME QK 000192 |
Polyphenylene Oxide, Modified |
|
GME QK 000193 |
Polycarbonate with Glass Fibres-English/German |
|
GME QK 000194 |
PC + PBT-Blend-English Translation Available |
|
GME QK 000195 |
(PC + ABS) - Blend-English Translation Available |
|
GME QK 000198 |
Polycarbonate - Moulding Compounds, UV Stabilized |
|
GME QK 000199 |
Polyphenylene Sulfide with Glass Fibres-English Translation Available |
|
GME QK 000200 |
Polyphenylene Oxide, Modified |
|
GME QK 000201 |
Polystyrene-Moulding Compound, impact resistant-Replaced by QK 006421 (see QK 006400) |
|
GME QK 000202 |
Polystyrene - Moulding Compounds, Impact Resistant |
|
GME QK 000203 |
Polystyrene - Moulding Compound,Impact Resistant-Replaced by QK 000204; English Translation Available |
|
GME QK 000204 |
Polystyrene-Moulding Compound, high impact resistant-Replaced by QK 006422 (see QK 006400) |
|
GME QK 000205 |
Polystyrene - Moulding Compounds, Impact Resistant-Replaced by QK 000210 |
|
GME QK 000206 |
Polyphenylene Oxide, Modified |
|
GME QK 000207 |
Polyphenylene Oxide, Modified |
|
GME QK 000208 |
Polycarbonate Moulding Compounds, Modified |
|
GME QK 000209 |
(PC + ABS) - Blend-English Translation Available |
|
GME QK 000210 |
Polystyrene - Moulding Compounds, Impact Resistant-English Translation Available |
|
GME QK 000211 |
Polystyrene - Moulding Compound, Impact Resistant-English Translation Available |
|
GME QK 000212 |
Polystyrene-Moulding Compound, impact resistant-Replaced by QK 006421 (see QK 006400) |
|
GME QK 000213 |
PC + PBT - Blend-English Translation Available |
|
GME QK 000214 |
Polycarbonate (PC) - Foil, Reinforced with Glass Fibres |
|
GME QK 000215 |
Blend from PC and ABS-Replaced by QK 000231 |
|
GME QK 000216 |
Blend from ABS and PC |
|
GME QK 000217 |
Impact Resistant Polystyrene (SB) |
|
GME QK 000218 |
Polycarbonate |
|
GME QK 000219 |
PC + PBT - Blend-English Translation Available |
|
GME QK 000220 |
Acrylic Ester-Styrene-Acrylonitrile-Terpolymer-English Translation Available |
|
GME QK 000221 |
Acrylic Ester-Styrene-Acrylonitrile-Terpolymer-English Translation Available |
|
GME QK 000222 |
Styrene-Acrylonitrile-Copolymer-English Translation Available |
|
GME QK 000223 |
Styrene-Acrylonitrile-Copolymer-English Translation Available |
|
GME QK 000224 |
Styrene-Acrylonitrile-Copolymer with Glass Fibres-English Translation Available |
|
GME QK 000225 |
Styrene-Acrylonitrile-Copolymer-English Translation Available |
|
GME QK 000226 |
Acrylic Ester-Styrene-Acrylonitrile-Copolymer-English Translation Available |
|
GME QK 000227 |
(PC + ABS) - Blend-English Translation Available |
|
GME QK 000228 |
ABS/PC - Blend with Glass Fibres |
|
GME QK 000229 |
Styrene-Maleic Acid Anhydride-Copolymer with Glass Fibres |
|
GME QK 000230 |
ASA + PC - Blend-English Translation Available |
|
GME QK 000231 |
(PC + ABS) - Blend-English Translation Available |
|
GME QK 000232 |
PPE/PA6 - Blend-English Translation Available |
|
GME QK 000233 |
PPE/PA6 - Blend |
|
GME QK 000234 |
Acrylic Ester-Styrene-Acrylonitrile-Terpolymer-English Translation Available |
|
GME QK 000235 |
PPE/PA6 - Blend with Glass Fibres-English Translation Available |
|
GME QK 000241 |
ABS - Moulding Compounds, Grey, Standard Quality-Replaced by QK 000249 |
|
GME QK 000246 |
ABS-Moulding Compounds, Quality of Dimensional Stability under Heat-Replaced by QK 002012 (see QK 002000) |
|
GME QK 000247 |
ABS - Moulding Compounds, Black, Standard Quality-Replaced by QK 000306 |
|
GME QK 000248 |
ABS - Moulding Compounds, Black, Standard Quality-Replaced by QK 000293 |
|
GME QK 000249 |
ABS - Moulding Compound, Heat Dimensionally Stable Quality- Replaced by QK 000253; English Translation Available |
|
GME QK 000250 |
ABS, Quality of Increased Dimensional Stability under Heat- Replaced by QK 000293 |
|
GME QK 000251 |
ABS, Quality of High Dimensional Stability under Heat-Replaced by QK 002013 (see QK 002000) |
|
GME QK 000252 |
ABS - Moulding Compounds, Black, Standard Quality |
|
GME QK 000253 |
ABS - Moulding Compound |
|
GME QK 000254 |
ABS Moulding Compound-English Translation Available |
|
GME QK 000255 |
ABS Moulding Compounds, Black, Standard Quality |
|
GME QK 000256 |
ABS - Moulding Compounds, High Notched Impact Strength |
|
GME QK 000257 |
ABS - Moulding Compounds, High Notched Impact Strength |
|
GME QK 000258 |
ABS - Moulding Compound |
|
GME QK 000259 |
ABS - Moulding Compound, Higher Impact Strength |
|
GME QK 000260 |
ABS-Moulding Compound |
|
GME QK 000261 |
ABS-Moulding Compound |
|
GME QK 000262 |
Acrylonitrile-Butadiene-Styrene-Terpolymer-English Translation Available |
|
GME QK 000263 |
ABS Moulding Compounds, Higher Notched Impact Strength |
|
GME QK 000265 |
ABS Moulding Compounds, Higher Notched Impact Strength |
|
GME QK 000266 |
ABS-Moulding Compound, Impact Resistant Quality with High Dimensional Stability under Heat |
|
GME QK 000267 |
ABS-Moulding Compound, Quality of Dimensional Stability under Heat |
|
GME QK 000268 |
ABS-Moulding Compounds, Quality of High Dimensional Stability under Heat-Replaced by QK 000267 |
|
GME QK 000269 |
ABS-Moulding Compound |
|
GME QK 000270 |
ABS-Moulding Compound, Impact Resistant and Heat Dimensionally Stable Quality-Replaced QK 000253 |
|
GME QK 000271 |
ABS, Quality of High Dimensional Stability under Heat-Replaced by QK 002013 (See QK 002000) |
|
GME QK 000272 |
Acrylonitrile-Butadiene-Styrene-Terpolymer-Replaced by QK 002022 Z and QK 002021 Z respectively (see QK 002000) |
|
GME QK 000273 |
Acrylonitrile-Butadiene-Styrene-Terpolymer-English Translation Available |
|
GME QK 000274 |
ABS Moulding Compounds, Higher Deformation Stability Under Heat |
|
GME QK 000275 |
ABS Moulding Compounds, Higher Deformation Stability Under Heat |
|
GME QK 000276 |
ABS Moulding Compounds, Higher Deformation Stability Under Heat |
|
GME QK 000277 |
ABS Moulding Compounds, Higher Deformation Stability Under Heat |
|
GME QK 000278 |
ABS-Moulding Compounds, No Black Standard Quality-Replaced by QK 000246 |
|
GME QK 000279 |
ABS-Moulding Compounds, No Black Standard Quality-Replaced by QK 000306 |
|
GME QK 000280 |
ABS-Moulding Compound, No Black, Standard Quality |
|
GME QK 000281 |
ABS-Moulding Compounds, No Black Standard Quality-Replaced by QK 000249 |
|
GME QK 000282 |
ABS-Moulding Compounds, No Black Standard Quality-Replaced by QK 000250 |
|
GME QK 000283 |
ABS-Moulding Compounds, No Black Standard Quality-Replaced by QK 000251 |
|
GME QK 000284 |
ABS-Moulding Compounds, No Black, Standard Quality-Replaced by QK 000253 |
|
GME QK 000285 |
ABS-Moulding Compounds, No Black, Standard Quality-Replaced by QK 000253 |
|
GME QK 000286 |
Acrylonitrile-Butadiene-Styrene-Terpolymer-Replaced by QK 002012 (see QK 002000) |
|
GME QK 000287 |
ABS Moulding Compounds, No Black, Standard Quality |
|
GME QK 000288 |
ABS-Moulding Compound |
|
GME QK 000289 |
ABS, galvanizable-Replaced by QK 000291 |
|
GME QK 000290 |
Acrylonitrile-Butadiene-Styrene-Terpolymer-English Translation Available |
|
GME QK 000291 |
ABS - Terpolymer |
|
GME QK 000292 |
ABS Moulding Compounds, Galvanizable |
|
GME QK 000293 |
ABS-Moulding Compounds |
|
GME QK 000294 |
ABS-Moulding Compounds, Quality of High Dimensional Stability under Heat |
|
GME QK 000296 |
ABS-Moulding Compounds, Standard Quality-Replaced by QK 002021 (see QK 002000) |
|
GME QK 000297 |
ABS Moulding Compounds, Higher Deformation Stability Under Heat |
|
GME QK 000298 |
ABS-Moulding Compounds, Galvanizable |
|
GME QK 000300 |
Blend of Polyphenylene Ether and Polystyrene, with Flame Retardent-English Translation Available |
|
GME QK 000301 |
ABS-PVC-Compound Foil Material |
|
GME QK 000302 |
ABS-PVC-Compound (Regenerated Material) |
|
GME QK 000303 |
Vinylchloride-Vinylacetate-Copolymer |
|
GME QK 000304 |
ABS-PVC-Compound Foil Material |
|
GME QK 000305 |
ABS-PVC-Compound-Replaced by QK 000304 |
|
GME QK 000306 |
ABS-Moulding Compounds, Impact Resistant Quality-Replaced by QK 002021 (see QK 002000) |
|
GME QK 000308 |
ABS - Terpolymer with Glass Fibres |
|
GME QK 000311 |
Acrylnitrile-Butadiene-Styrene-Moulding Compounds-English Translation Available |
|
GME QK 000312 |
Acrylonitrile-Butadiene-Styrene-Terpolymer-English Translation Available |
|
GME QK 000313 |
ABS Terpolymer-Replaced by QK 000312 |
|
GME QK 000314 |
ABS, Higher Notched Impact Strength-Replaced by QK 000256 |
|
GME QK 000315 |
ABS-Moulding Compound |
|
GME QK 000316 |
ABS-Replaced by QK 002014 (see QK 002000) |
|
GME QK 000317 |
ABS-Moulding Compounds |
|
GME QK 000318 |
Acrylonitrile-Butadiene-Styrene-Terpolymer-English Translation Available |
|
GME QK 000319 |
ABS+PMMA-Moulding Compound-English Translation Available |
|
GME QK 000320 |
Acetal-Copolymer with Lubricant-English Translation Available |
|
GME QK 000321 |
Acetal-Copolymer (POM) Middle Melting Viscosity |
|
GME QK 000322 |
Acetal-Copolymer-English Translation Available |
|
GME QK 000323 |
Acetal-Copolymer (POM) Middle Melting Viscosity with Lubricant |
|
GME QK 000324 |
Acetal-Copolymer-English Translation Available |
|
GME QK 000325 |
Polyacetal Homopolymer |
|
GME QK 000326 |
Polyacetal-Homopolymer-English Translation Available |
|
GME QK 000327 |
Acetal-Copolymer (POM) Middle Melting Viscosity |
|
GME QK 000328 |
Polyoximethylene-Copolymer-English Translation Available |
|
GME QK 000329 |
Polyacetal-Homopolymer-English Translation Available |
|
GME QK 000330 |
Acetal-Copolymer with Glass Fibres-English Translation Available |
|
GME QK 000331 |
Acetal-Copolymer-English Translation Available |
|
GME QK 000332 |
Acetal-Copolymer-English Translation Available |
|
GME QK 000333 |
Acetal-Copolymer (POM) Middle Melting Viscosity |
|
GME QK 000334 |
Acetal-Copolymer (POM) Lowest Melting Viscosity |
|
GME QK 000335 |
Polyacetal-Homopolymer (POM)-English Translation Available |
|
GME QK 000336 |
Acetal-Copolymer with Minerals-English Translation Available |
|
GME QK 000337 |
Acetal-Homopolymer |
|
GME QK 000338 |
Acetal-Copolymer-English Translation Available |
|
GME QK 000339 |
Acetal-Homopolymer with Glass Fibres |
|
GME QK 000340 |
Acetal-Homopolymer (POM) |
|
GME QK 000341 |
Polyacetal-Homopolymer (POM)-English Translation Available |
|
GME QK 000342 |
Polyoximethylene |
|
GME QK 000343 |
Polyoximethylene |
|
GME QK 000345 |
Polyoximethylene-Copolymer-English Translation Available |
|
GME QK 000346 |
Acetal-Copolymer-English Translation Available |
|
GME QK 000347 |
Polyoximethylene-Copolymer-English Translation Available |
|
GME QK 000348 |
Polyacetal-Homopolymer-English Translation Available |
|
GME QK 000349 |
Acetal-Homopolymer (POM), Weather Stabilized |
|
GME QK 000350 |
Acetal-Copolymer (POM) with 30 % By Mass Glass Spheres and 15 % by Mass PTFE |
|
GME QK 000351 |
Acetal-Copolymer, Impact Resistant Modified-English Translation Available |
|
GME QK 000352 |
Acetal-Copolymer with Glass Spheres-English Translation Available |
|
GME QK 000353 |
Acetal-Homopolymer (POM) with PTFE Fibres |
|
GME QK 000354 |
Polyoximethylene, Impact Resistant Modified-English Translation Available |
|
GME QK 000355 |
Acetal-Copolymer (POM) with Lubricant |
|
GME QK 000356 |
Polyoximethylene Copolymer |
|
GME QK 000357 |
Acetal-Copolymer, Impact Resistant Modified-English Translation Available |
|
GME QK 000358 |
Acetal-Homopolymer, Impact Resistant Modified |
|
GME QK 000359 |
Acetal-Copolymer, Impact Resistant Modified-English Translation Available |
|
GME QK 000360 |
CAB Moulding Compound, Soft |
|
GME QK 000361 |
Celluloseacetobutyrate-English Translation Available |
|
GME QK 000362 |
CAB Moulding Compound, Rigid |
|
GME QK 000363 |
CA - Plates-English Translation Available |
|
GME QK 000364 |
CP Moulding Compound, Soft |
|
GME QK 000365 |
CAB Moulding Compound, Rigid |
|
GME QK 000366 |
Polyoximethylene Copolymer |
|
GME QK 000379 |
Polyacetal Homopolymer |
|
GME QK 000380 |
Polyacetal-Homopolymer |
|
GME QK 000381 |
Acetal-Copolymer, Modified-English Translation Available |
|
GME QK 000382 |
Acetal-Homopolymer, Impact Resistant Modified |
|
GME QK 000383 |
Acetal-Copolymer, Impact Resistant Modified-English Translation Available |
|
GME QK 000384 |
Acetal-Copolymer with Glass Fibres-English Translation Available |
|
GME QK 000385 |
Acetal-Copolymer, High Impact Resistant-English Translation Available |
|
GME QK 000386 |
Acetal-Copolymer, High Impact Resistant-English Translation Available |
|
GME QK 000387 |
Polyoximethylene-English Translation Available |
|
GME QK 000388 |
Polyoximethylene-English Translation Available |
|
GME QK 000389 |
Polyoximethylene-English Translation Available |
|
GME QK 000390 |
Polyoximethylene-Copolymer-English Translation Available |
|
GME QK 000391 |
Polyoximethylene with Glass Fibres-English Translation Available |
|
GME QK 000393 |
Polyoximethylene |
|
GME QK 000394 |
Polyoximethylene with Glass Beads |
|
GME QK 000395 |
Polyoximethylene |
|
GME QK 000396 |
Polyoximethylene Homopolymer |
|
GME QK 000397 |
Blend from POM and EPDM |
|
GME QK 000398 |
Polyoximethylene |
|
GME QK 000399 |
Polyoximethylene |
|
GME QK 000401 |
Rigid PVC+ABS-Blend with Mineral Fillers |
|
GME QK 000402 |
Plasticized PVC with Glass Fibres |
|
GME QK 000403 |
Rigid PVC+ABS-Blend with Mineral Fillers |
|
GME QK 000404 |
Plasticized PVC with Glass Fibres |
|
GME QK 000405 |
Rigid PVC with Glass Fibres |
|
GME QK 000406 |
Rigid PVC with Glass Fibres |
|
GME QK 000407 |
Blend from Plasticized PVC and NBR |
|
GME QK 000408 |
Rigid PVC, Modified |
|
GME QK 000409 |
Rigid PVC with Glass Fibres |
|
GME QK 000410 |
Blend from PVC and NBR, (75 5 ) Shore A |
|
GME QK 000411 |
Blend from PVC and NBR |
|
GME QK 000412 |
Blend from PVC and NBR, (85 5) Shore A |
|
GME QK 000413 |
Blend from PVC and NBR, (80 5) Shore A |
|
GME QK 000414 |
Blend from PVC and NBR, (68 3) Shore A |
|
GME QK 000415 |
Blend from PVC and NBR, (82 3) Shore A |
|
GME QK 000416 |
Plasticized PVC, (65 5) Shore A |
|
GME QK 000417 |
Rigid PVC with Filler |
|
GME QK 000418 |
Rigid PVC with Filler |
|
GME QK 000419 |
PTFE, (60 5) Shore D |
|
GME QK 000420 |
PVC, (80 5 ) Shore A |
|
GME QK 000421 |
Plasticized PVC, (80 5) Shore A |
|
GME QK 000422 |
Plasticized PVC, (50 5) Shore A |
|
GME QK 000423 |
Plasticized PVC, (95 5) Shore A |
|
GME QK 000424 |
Plasticized PVC with Filler, (75 5) Shore A |
|
GME QK 000425 |
Plasticized PVC, (65 5) Shore A |
|
GME QK 000426 |
Plasticized PVC, (85 5) Shore A |
|
GME QK 000427 |
Plasticized PVC, (75 5) Shore A |
|
GME QK 000428 |
Plasticized PVC, (70 5) Shore A |
|
GME QK 000429 |
Plasticized PVC, (60 5) Shore A |
|
GME QK 000430 |
Plasticized PVC with Filler, (85 5) Shore A |
|
GME QK 000431 |
Plasticized PVC, (90 5) Shore A |
|
GME QK 000432 |
Plasticized PVC, (60 5) Shore A |
|
GME QK 000433 |
Plasticized PVC with Filler, (70 5) Shore A |
|
GME QK 000434 |
Blend from Plasticized PVC and NBR, (60 5) Shore A |
|
GME QK 000435 |
Plasticized PVC, (55 5) Shore A |
|
GME QK 000436 |
Polyvinylidene Fluoride |
|
GME QK 000437 |
PVC, (70 5) Shore A-English/German |
|
GME QK 000438 |
Plasticized PVC with Filler, (80 5) Shore A |
|
GME QK 000439 |
Plasticized PVC, (80 5) Shore A |
|
GME QK 000440 |
Plasticized PVC, (56 3) Shore A |
|
GME QK 000441 |
Hard-PVC, Impact Resistant Modified |
|
GME QK 000442 |
Rigid PVC |
|
GME QK 000443 |
Plasticized PVC with Filler, (60 5) Shore A |
|
GME QK 000444 |
Plasticized PVC with Filler, (65 5) Shore A |
|
GME QK 000445 |
Plasticized PVC, (40 5) Shore A |
|
GME QK 000446 |
Plasticized PVC, (51 3) Shore A |
|
GME QK 000447 |
Plasticized PVC with Filler, (90 5) Shore A |
|
GME QK 000448 |
Plasticized PVC with Filler, (85 5) Shore A |
|
GME QK 000449 |
Rigid PVC |
|
GME QK 000450 |
Hard-PVC, impact resistant modified |
|
GME QK 000451 |
Plasticized PVC, (80 5) Shore A |
|
GME QK 000452 |
Plasticized PVC, (94 3) Shore A |
|
GME QK 000453 |
Plasticized PVC with Filler, (75 5) Shore A |
|
GME QK 000454 |
Plasticized PVC with Filler, (96 4) Shore A |
|
GME QK 000455 |
PVC-Moulding Compound, Soft, with Filler-English Translation Available |
|
GME QK 000456 |
PVC+NBR-Blend, (90 to 95) Shore A |
|
GME QK 000457 |
Ethylene Vinyl Acetate Copolymer |
|
GME QK 000458 |
Ethylene Vinyl Acetate Copolymer |
|
GME QK 000459 |
PVAL - Foil-English Translation Available |
|
GME QK 000470 |
SMC |
|
GME QK 000472 |
Polybutylene Terephthalate |
|
GME QK 000473 |
Polybutylene Terephthalate with 30 % by Mass Glass Fibre |
|
GME QK 000477 |
Polybutylene Terephthalate with Glass Fibres-English Translation Available |
|
GME QK 000482 |
Polybutylene-Terephthalate |
|
GME QK 000486 |
Polyethylene-Terephthalate (PETP) with 45 % by Mass Glass Fibres |
|
GME QK 000488 |
Polybutylene Terephthalate with Glass Fibres-English Translation Available |
|
GME QK 000489 |
Polybutylene Terephthalate-English Translation Available |
|
GME QK 000521 |
Polyethylene Terephthalate (PETP) with 30 % by Mass Glass Fibre |
|
GME QK 000522 |
Polybutylene Terephthalate, Reinforced with Glass Fibres-English Translation Available |
|
GME QK 000524 |
Polybutylene Terephthalate with Glass Fibres-English Translation Available |
|
GME QK 000525 |
PMMA Moulding Compound, Type 525 DIN 7745-English Translation Available |
|
GME QK 000526 |
PMMA Moulding Compound, Type 526 DIN 7745-English Translation Available |
|
GME QK 000527 |
PMMA Moulding Compound, Type 527 DIN 7745-English Translation Available |
|
GME QK 000528 |
PMMA Moulding Compound, Type 528 DIN 7745-English Translation Available |
|
GME QK 000529 |
Polymethyl Methacrylate, Modified-English Translation Available |
|
GME QK 000530 |
Polymethyl Methacrylate, Modified-English Translation Available |
|
GME QK 000531 |
Polymethyl Methacrylate |
|
GME QK 000601 |
Polybutyleneterephthalate |
|
GME QK 000602 |
Polybutyleneterephthalate, Modified-English Translation Available |
|
GME QK 000603 |
Polybutyleneterephthalate with Glass Fibres and Balls-English Translation Available |
|
GME QK 000604 |
Polybutyleneterephthalate (PBTP) |
|
GME QK 000605 |
Polybutyleneterephthalate-English Translation Available |
|
GME QK 000606 |
Polybutyleneterephthalate (PBTP) with 15 % by Mass Glass Fibres |
|
GME QK 000607 |
Polybutyleneterephthalate (PBTP) with 30 % by Mass Glass Fibres |
|
GME QK 000608 |
Polybutyleneterephthalate with Glass Fibres-English Translation Available |
|
GME QK 000609 |
Polybutyleneterephthalate (PBTP) |
|
GME QK 000610 |
Polyether Sulfone with Glass Fibres |
|
GME QK 000611 |
PBTP with Mineralic Filler |
|
GME QK 000612 |
PETP Reinforced with Minerals and Glass Fibre |
|
GME QK 000613 |
PETP Reinforced with Glass Fibre |
|
GME QK 000614 |
Polybutylene Terephthalate with Glass Spheres-English Translation Available |
|
GME QK 000616 |
Modified Polybutyleneterephthalate with Minerals-English Translation Available |
|
GME QK 000620 |
SMC |
|
GME QK 000621 |
SMC-English Translation Available; Replaced by DIN 16911 - FS 801 N |
|
GME QK 000622 |
SMC |
|
GME QK 000623 |
Polybutylene Terephthalate-English Translation Available |
|
GME QK 000624 |
Polybutylene Terephthalate-English Translation Available |
|
GME QK 000626 |
Blend of Polybutyleneterephthalate and Acrylonitrile-Styrene- Acrylester-Terpolymer with Glass Fibres-English Translation Available |
|
GME QK 000632 |
Polybutylene Terephthalate, Elastomer Modified-English Translation Available |
|
GME QK 000633 |
Blend of Polybutyleneterephthalate and Acrylonitrile-Styrene- Acrylester-Terpolymer with Glass Fibres-English Translation Available |
|
GME QK 000634 |
Polycarbonate Polybutylen Terephthalate Blend-English Translation Available |
|
GME QK 000637 |
Blend from PBT and ASA with Glass Fibres |
|
GME QK 000638 |
Blend from PBT and ASA with Glass Fibres |
|
GME QK 000640 |
Polycarbonate Polybutylene Terephthalate Blend |
|
GME QK 000642 |
Blend from PBT and ASA with Glass Fibres- English/German |
|
GME QK 000647 |
Polyethyleneterephthalate with Glass Fibres |
|
GME QK 000652 |
Blend fromPBT and PET with Glass Fibres |
|
GME QK 000653 |
Thermoplastic Polyester Elastomer-English/German |
|
GME QK 000654 |
Blend from PC and PTFE |
|
GME QK 000680 |
Polyetheramide-Copolymer (83 Plus or Minus 5) Shore A |
|
GME QK 000681 |
Polyetherimide-English Translation Available |
|
GME QK 000682 |
PEEK, Reinforced with Glass Fibre |
|
GME QK 000683 |
Polyethersulfon-English Translation Available |
|
GME QK 000684 |
Polyethersulfon-English Translation Available |
|
GME QK 000685 |
Polyimide, Modified-English Translation Available |
|
GME QK 000691 |
Polyphenylene Sulfide with Glass Fibres |
|
GME QK 000692 |
Polyphenylene Sulfide with Glass Fibres and Minerals |
|
GME QK 000695 |
Polyketone |
|
GME QK 000696 |
Polyethersulfone |
|
GME QK 000697 |
Syndiotactic Polystyrene with Glass Fibres |
|
GME QK 000700 |
Polystyrene with Glass Fibres |
|
GME QK 000701 |
Polystyrene with Glass Fibres |
|
GME QK 000703 |
Blend from PPE and PA66 with Glass Fibres |
|
GME QK 000712 |
Phenoplast with Asbestos Fibres |
|
GME QK 000731 |
Phenoplast with Wood Meal |
|
GME QK 000739 |
Phenolic Plast with Glass Fibres |
|
GME QK 000740 |
Phenoplast with Glass Fibres and Glass Balls |
|
GME QK 000741 |
Phenoplast with Fillers, Free of Asbestos |
|
GME QK 000742 |
Phenoplast with Fillers, Free of Asbestos |
|
GME QK 000743 |
Phenoplast with Fillers, Free of Asbestos-English Translation Available |
|
GME QK 000744 |
Phenoplast with Mineral Fillers and Glass Fibres |
|
GME QK 000745 |
Phenoplast with Mineral Filler |
|
GME QK 000746 |
Phenolic Plast with Mineralic Fillers and Glass Fibres-English Translation Available |
|
GME QK 000747 |
Phenoplast with Graphite Filling-English Translation Available |
|
GME QK 000748 |
Phenoplast with Carbon Fibres and Graphite Filling-English Translation Available |
|
GME QK 000749 |
Phenoplast with Glass Fibres and Minerals-English Translation Available |
|
GME QK 001241 |
Acrylonitrile-Butadiene-Styrene-Terpolymer, Reinforced with Glass Fibres-English Translation Available |
|
GME QK 001242 |
ABS-Replaced by QK 000256 |
|
GME QK 001243 |
ABS-Replaced by QK 000257 |
|
GME QK 001244 |
Methylmethacrylate-Acrylonitrile-Butadiene-Styrene-Polymer-English Translation Available |
|
GME QK 001245 |
ABS-Moulding Compound, Impact Resistant Quality of High Dimensional Stability under Heat-English Translation Available |
|
GME QK 001246 |
ABS/PVC-Blend |
|
GME QK 001247 |
ABS - Moulding Compounds with Glass Fibre-Replaced by QK 000308 |
|
GME QK 001248 |
ABS/PVC-Blend-English Translation Available |
|
GME QK 001249 |
Acrylonitrile-Butadiene Styrene-Terpolymer-English Translation Available |
|
GME QK 001250 |
Styrene-Maleic Acid Anhydride - Copolymer with Glass Fibres- English Translation Available |
|
GME QK 001251 |
Acrylonitrile-Butadiene-Styrene-Terpolymer-English Translation Available |
|
GME QK 001252 |
Styrene Maleic Acid Anhydride Copolymer with Glass Fibres |
|
GME QK 001253 |
Styrene-Maleic Acid Anhydride-Copolymer Reinforced with Glass Fibres |
|
GME QK 001254 |
Blend of Polyphenylene Ether and Polystyrene-English Translation Available |
|
GME QK 001255 |
Styrene-Maleic Acid Anhydride-Copolymer with Glass Fibres |
|
GME QK 001828 |
Polypropylene with Glass Fibres-Replaced by QK 001832 |
|
GME QK 001834 |
Blend from PP and EPDM with Talc-English/German |
|
GME QK 001875 |
Polyethyleneterephthalate with Glass Fibres |
|
GME QK 001882 |
PA6 with Minerals and Glass Fibres |
|
GME QK 001900 |
Blend from PC and PBT-Replaces QK 000619 |
|
GME QK 001901 |
Polyoximethylene |
|
GME QK 001902 |
Blend from PC and PBT |
|
GME QK 001903 |
Polyoximethylene |
|
GME QK 001904 |
Polyoximethylene |
|
GME QK 001905 |
Polycarbonate with Glass Fibres |
|
GME QK 001906 |
Polycarbonate |
|
GME QK 001907 |
Polyoximethylene |
|
GME QK 001908 |
Polycarbonate with Glass Fibres |
|
GME QK 001909 |
Blend from PBT and ASA with Glass Fibres |
|
GME QK 001910 |
Blend from PBT and PET with Glass Fibres |
|
GME QK 001950 |
Styrene-Maleic Anhydride-Copolymer with Glass Fibres |
|
GME QK 001951 |
ABS |
|
GME QK 001952 |
ABS |
|
GME QK 001954 |
Blend from ABS and PC with Glass Fibres |
|
GME QK 001955 |
Blend from ABS and PC |
|
GME QK 001956 |
ABS-English Translation Available |
|
GME QK 001958 |
ABS with Glass Fibres |
|
GME QK 001960 |
S/MA with Glass Fibres |
|
GME QK 001961 |
Blend from ABS and PC |
|
GME QK 002000 |
ABS |
|
GME QK 002200 |
ABS - GF |
|
GME QK 002400 |
ABS-, ASA- resp. SAN-Blends |
|
GME QK 002500 |
ABS resp. ASA Blends, Reinforced |
|
GME QK 003200 |
PMMA-English Translation Available |
|
GME QK 005300 |
POM - Homopolymer-English Translation Available |
|
GME QK 005600 |
Polyacetal-Copolymer Material Types-English Translation Available |
|
GME QK 005900 |
PC |
|
GME QK 006100 |
Polycarbonate Material Types with Fillers |
|
GME QK 006400 |
Polystyrene-Butadiene-Copolymer Material Types |
|
GME QK 006500 |
Polybutylene Terephthalate Material Types |
|
GME QK 006600 |
Polybutylene Terephthalate, Reinforced |
|
GME QK 009170 |
Polycarbonate - Moulding Compounds-English Translation Available |
|
GME QK 009172 |
Polycarbonate - Moulding Compounds, UV Stabilized-English Translation Available |
|
GME QK 009992 |
PMMA Moulding Compound-English Translation Available |
|
GME QK 009995 |
Polyacetal-Homo- and Copolymers-English Translation Available |
|
GME STD 518054 |
Plastics 8054 Plasticized PVC |
|
GME STD 518265 |
Plastic 8265 (PC with 20% GF) |
|
GME STD 518286 |
Plastic 8286 (PMMA) |
|
GME STD 518361 |
Plastic 8361 ABS |
|
GME STD 518380 |
Plastic 8380 Wood flour filler moulding compound |
|
GME STD 518437 |
Plastic 8437 (POM) |
|
GME STD 518522 |
Plastic 8522 (EVA) |
|
GME STD 518528 |
Plastic 8528 PPO/PA |
|
GME STD 518628 |
Plastic 8628 POM |
|
GME STD 518654 |
Plastic 8654 ASA+PC |
|
GME STD 518705 |
Plastic 8705 PVC |
|
GME STD 518731 |
Plastic 8731 ABS |
|
GME STD 518739 |
Plastic 8739 ABS+PA6 |
|
GME STD 518743 |
Plastic 8743 ABS |
|
GME STD 518755 |
Plastic 8755 PVC/ABS |
|
GME STD 518765 |
Plastic 8765 PVC, rigid |
|
GME STD 518766 |
Plastic 8766 PVC, plasticized |
|
GME STD 518826 |
Plastic 8826 PPO/PA-GF |
|
GME STD 518832 |
Plastic 8832 PS Plastic sheet with adhesive |
|
GME STD 518868 |
Plastic 8868 PTFE |
|
GME STD 518909 |
Plastic 8909 CAB |
|
GME STD 518946 |
Plastic 8946 UP-GF18 |
|
GME STD 518974 |
Plastic 8974 UP-GR30-English/Swedish |
|
GME TM 373800 |
General Requirements for Heavy Layers |
|
GME TM 413000 |
PVC Skin |