|
GME GME8742 |
Testing the Specific Volume Resistance of Elastomers, Plastics and Adhesives |
|
GME OPEL 100 |
Hardness Reference Tables for Steel and Cast Steel |
|
GME OPEL 101 |
Brinell Hardness Test-English Translation Available |
|
GME OPEL 102 |
Vickers Hardness Test-English Translation Available |
|
GME OPEL 103 |
Rockwell (Method C, A, B) Hardness Test-English Translation Available |
|
GME OPEL 104 |
Rockwell (Method N and T) Hardness Test-English Translation Available |
|
GME OPEL 105 |
Microscopic Examination of Steels for Non-Metallic Inclusions-English Translation Available |
|
GME OPEL 106 |
Evaluation of the Honing Quality of Cylinder Bores-English Translation Available |
|
GME OPEL 107 |
Microscopic Test of Cast Iron by Means of Structure Rating Charts- English Translation Available |
|
GME OPEL 151 |
Determination of Loosening and Friction Moments of Rotating Ball Joints (Pin Pivot and Ball Joints) |
|
GME OPEL 152 |
Determination of Loosening and Friction Moments of Oscillating Ball Joints (Ball Joints) |
|
GME OPEL 153 |
Determination of Radial Elasticity of Pin Pivots and Ball Joints |
|
GME OPEL 154 |
Determination of Axial Elasticity of Ball Joints |
|
GME OPEL 156 |
Static Load Capacity Of Vehicle Jacks-English Translation Available |
|
GME OPEL 157 |
Test of Seat High Adjuster |
|
GME OPEL 200 |
Test of Hose Clambers - Lock-Efficiency |
|
GME OPEL 202 |
Determination of Austenite Grain Size-English Translation Available |
|
GME OPEL 203 |
End Quench Test (Jominy)-English Translation Available |
|
GME OPEL 204 |
Determination of Resistance to Corrosion of Automotive Components by Modified Corrodkote Test |
|
GME OPEL 205 |
Dielectric Welding Properties of Upholstery Materials |
|
GME OPEL 206 |
Salt Spray Fog Testing |
|
GME OPEL 207 |
Cass Test |
|
GME OPEL 208 |
Stress Corrosion Cracking Test |
|
GME OPEL 209 |
Determination of Porosity of Coatings on Ferrous Materials |
|
GME OPEL 211 |
Salt Spray Fog Testing for Electrical and Electronical Components of Motor Vehicles-Replaced by GME 60211 |
|
GME OPEL 221 |
Fixed Rust Test for Clutch Facings |
|
GME OPEL 222 |
Test Specification for Determination of Electrostatic Properties of Upholstery Materials |
|
GME OPEL 224 |
Determination of Cohesive Strength of Felts |
|
GME OPEL 225 |
Durability |
|
GME OPEL 226 |
Colour Fastness to Rubbing-Replaced by GME 60330 |
|
GME OPEL 227 |
Fatigue Test of Polyurethane Foam |
|
GME OPEL 228 |
Static Compression Test of Upholstery Layers |
|
GME OPEL 229 |
Indentation Hardness of Rubber to Shore A |
|
GME OPEL 230 |
Determination of Push-On and Pull-Off Force of Fuel Hoses-English Translation Available |
|
GME OPEL 231 |
Determination of Fuel Permeability of Hoses-English Translation Available |
|
GME OPEL 232 |
Measurement of Inner- and Outer Diameter of Hoses |
|
GME OPEL 233 |
Leakage Test of Sealing Systems in Fuel Line Systems-English Translation Available |
|
GME OPEL 234 |
Determination of Deposits in the Fuel System-English Translation Available |
|
GME OPEL 235 |
"Pilling" Test of Upholstery Materials |
|
GME OPEL 236 |
Evaluation Fogging Characteristics |
|
GME OPEL 239 |
Test for Sound Deadener Pads |
|
GME OPEL 240 |
Production of a Defined Oil Film on Steel Surface |
|
GME OPEL 241 |
Evaluation of Adhesive Strength of Bonding |
|
GME OPEL 242 |
Determination of Foam Tendency of Lubricating Fluid |
|
GME OPEL 243 |
Resistance of Underbody Protection Coating Against Splash Water |
|
GME OPEL 250 |
Compression Set |
|
GME OPEL 251 |
Ozone Resistance of Elastomer Parts-Replaced by GME 60251 |
|
GME OPEL 252 |
Stickiness of Gaskets |
|
GME OPEL 253 |
Resistance Against Water/Antifreeze |
|
GME OPEL 254 |
Contact and Migratory Staining of Paint and Plastics by Rubber |
|
GME OPEL 255 |
Behavior of Rubber in Oil, Grease Etc. |
|
GME OPEL 256 |
Freezing Behavior of Impregnated Flock-Coated Elastomer Sealing Profiles |
|
GME OPEL 257 |
Determination of Moisture Content of Polyamide |
|
GME OPEL 258 |
Accelerated Ageing of Soft Rubber |
|
GME OPEL 259 |
Coolant Hoses - Textile Reinforced |
|
GME OPEL 260 |
Determination of Density and Pore Volume of Metallic Sinter Parts |
|
GME OPEL 261 |
Flammability |
|
GME OPEL 262 |
Testing of Plastic Exterior Parts |
|
GME OPEL 263 |
Determination of Water Permeability of Brake Hoses |
|
GME OPEL 264 |
Resistance Against Sulfide Staining |
|
GME OPEL 265 |
Test of Compatibility |
|
GME OPEL 268 |
Hardness of Upholstery Padding-Headrests |
|
GME OPEL 269 |
Test of Abrasion Resistance |
|
GME OPEL 270 |
Hot Stamped Foiling on Plastic Components |
|
GME OPEL 271 |
Temperature Test of Interior Parts Through IR-Exposure |
|
GME OPEL 272 |
Test of Air Permeability |
|
GME OPEL 274 |
Test of Plastic Components for Interior Use |
|
GME OPEL 278 |
Steering Wheel Covers in Cellulose Acetate Butyrate |
|
GME OPEL 279 |
Test of Luggage Dump |
|
GME OPEL 280 |
Hot Finger Test for Testing of Coolant Protection Agents |
|
GME OPEL 281 |
Corrosion Protection Behavior of Lubricants-English Translation Available |
|
GME OPEL 282 |
Test of Heat Stability of Lubricants |
|
GME OPEL 283 |
Test of Flexible Polyurethane Foam Moulding |
|
GME OPEL 284 |
Test of Self Adhesive Labels with Self Destructive Type |
|
GME OPEL 286 |
Test of Air Permeability and Air Resistance |
|
GME OPEL 287 |
Test of Adhesive Labels |
|
GME OPEL 288 |
Fuel Oil Soot Test (Resistance of Painted Surfaces to Color Change) |
|
GME OPEL 289 |
Resistance of Organic Coatings to Surface Deterioration by Chemical Action |
|
GME OPEL 290 |
Indentation Hardness of Foam Components |
|
GME OPEL 293 |
Bending Test on Sound Deadener Pads |
|
GME OPEL 294 |
Testing of Determining Chemical Resistance of Deadener Pads |
|
GME OPEL 295 |
Determination of Resistance to Abrasion of Paints and Similar Coatings |
|
GME OPEL 296 |
Testing of VCI Anti-Corrosive Papers-Replaced by GME 60296 |
|
GME OPEL 297 |
Determination of Average Thickness of Protective Wax Coatings on Metallic or Nonmetallic Materials |
|
GME OPEL 298 |
Compatibility Test for Underbody Protective Wax-English Translation Available |
|
GME OPEL 299 |
Compatibility Test for Box Section Protective Wax-English Translation Available |
|
GME OPEL 300 |
Determination of Thickness by Means of Calipers |
|
GME OPEL 301 |
Determination of Weight per Unit Area |
|
GME OPEL 302 |
Test of Softness of Films Artificial Leather and Textiles |
|
GME OPEL 303 |
Measurement of Thickness with Test Plate |
|
GME OPEL 304 |
Test of Water Fastness of Textile Fabrics |
|
GME OPEL 305 |
Determination of Stretch of Textile Fabrics and Artificial Leather |
|
GME OPEL 306 |
Determination of Low Temperature Resistance of Plastic Foil and Artificial Leather |
|
GME OPEL 307 |
Test of Hot and Cold Resistance |
|
GME OPEL 308 |
Determination of Melting Range of Plastic Materials |
|
GME OPEL 309 |
Test of Compatibility of Upholstery Materials |
|
GME OPEL 310 |
Test of Hydro-Sulfite Resistance |
|
GME OPEL 311 |
Coefficient of Friction of Seat Upholstery Materials |
|
GME OPEL 312 |
Apamat-Test |
|
GME OPEL 313 |
Loudspeaker Enclosure Test |
|
GME OPEL 314 |
Determination of Weight per Unit Area of the Backing of PVC-Coated Upholstery Materials |
|
GME OPEL 315 |
Determination of Resistance to Peeling of Adhered Artificial Leather, Carpets Etc. |
|
GME OPEL 316 |
Determination of Heat Resistance of Adhered Artificial Leather, Carpets Etc. |
|
GME OPEL 318 |
Determination of Resistance to Peel of Self Adhesive Tapes and Foils |
|
GME OPEL 320 |
Determination of Proportions of Animal Hair and Rubber in Upholstery Materials |
|
GME OPEL 3207/I |
Polyamide Pipes for Motor Vehicles |
|
GME OPEL 3207/II |
Polyamide Pipes for Motor Vehicles |
|
GME OPEL 321 |
Determination of Proportions of Vegetables Fibres and Rubber in Upholstery Materials |
|
GME OPEL 322 |
Determination of Resistance to Peel of Adhered PVC-Foils |
|
GME OPEL 324 |
Determination of Water Vapour Permeability |
|
GME OPEL 326 |
Adhesive Strength of Metal Compound Adhesive |
|
GME OPEL 327 |
Test of Dimensional Stability of Cardboards, Etc. under Climatic Influences |
|
GME OPEL 328 |
Test of Cold and Heat Resistance of Cardboards and Similar Materials |
|
GME OPEL 330 |
Test Method for Perception of Reflections in Vehicle Glazing |
|
GME OPEL 331 |
Measuring Method for Evaluation of Sound Quality of Speakers in the Vehicle |
|
GME OPEL 332 |
Determination of Permanent Arching of Textiles |
|
GME OPEL 336 |
Heat Ageing of Upholstery Trim Materials |
|
GME OPEL 337 |
Determination of Breaking Strength of Components in Chipboard |
|
GME OPEL 338 |
Hardness Number of Upholstery Padding of Rubberized Hair |
|
GME OPEL 339 |
Determination of Degree of Noise Absorption in the Pipe |
|
GME OPEL 340 |
Heat Ageing Resistance of Plastic Foils |
|
GME OPEL 341 |
Determination of Seam Strength |
|
GME OPEL 343 |
Determination of Adhesive Strength of Paint Finishes on Cardboards Etc. |
|
GME OPEL 345 |
Abrasion Resistance Test of Textiles |
|
GME OPEL 348 |
Vibration Test with Wide Band Random Vibrations |
|
GME OPEL 349 |
Sampling of Color with Artificial Light |
|
GME OPEL 350 |
Determination of Heat Climatic Resistance of Moulded Headlinings |
|
GME OPEL 360 |
Determination of the Compressive Strength of Rubber Cork and the Like |
|
GME OPEL 400 |
Deflection and Creep Test |
|
GME OPEL 410 |
Axial Section of Radial Shaft Seal Rings |
|
GME OPEL 411 |
Test of the Outside Diameter of Radial Shaft Seal Rings |
|
GME OPEL 412 |
Test of the Inner Diameter of Radial Shaft Seal Rings |
|
GME OPEL 413 |
Testing of Sealing Edge of Radial Shaft Seal Rings |
|
GME OPEL 414 |
Twist Angle Test on Radial Shaft Seal Rings |
|
GME OPEL 415 |
Bonding and Corrosion Behavior of Elastomers Toward Steel |
|
GME OPEL 416 |
Determination of Reference Value TR of Low Temperatures of Elastomers |
|
GME OPEL 4200 |
Organic Coatings of Highly Stressed Outer Parts (e.g. Disc Wheel) |
|
GME OPEL 4201 |
Organic Coat Finish for Chassis-Components-English Translation Available |
|
GME OPEL 4202 |
Dip-Primed Bodies |
|
GME OPEL 4203 |
Protective Coatings for Highly-Stressed Small Components |
|
GME OPEL 4204 |
Anodic Oxidation Coatings on Aluminium |
|
GME OPEL 4205 |
Organic Coat Finish for Cast Iron Parts-English Translation Available |
|
GME OPEL 4206A |
Cross Hatch Test of Organic Coatings |
|
GME OPEL 4206B |
Scratch Resistance of Organic Coatings |
|
GME OPEL 4207 |
Adhesive Strength of Metal Adhesives L 0000409 and L 0000745 |
|
GME OPEL 4208 |
Organic-Coatings on Plastic Parts |
|
GME OPEL 4209 |
Testing of Adhesive Strength of Solvent-Free Metal Adhesives Based on PVC |
|
GME OPEL 4211 |
Adhesive Behavior of Lubricants-English Translation Available * Replaced by GMI 60456 |
|
GME OPEL 4221 |
Impact-Saline Solution Resistance of Organic Coatings |
|
GME OPEL 4222 |
Galvanometer Test (Stone Impact Cold Test) |
|
GME OPEL 4223 |
Fuel Resistance of Painted Exterior Parts and Self Adhesive Films |
|
GME OPEL 4224 |
Resistance of Organic Coatings, Plastic Parts and Foils Etc. |
|
GME OPEL 4225 |
Testing of Organic Coatings on Metallic Decorative Parts Etc. |
|
GME OPEL 4226 |
Impact Resistance of Organic Coatings |
|
GME OPEL 4251 |
Electronically Deposited Multi-Coat System-Appendix |
|
GME OPEL 4252 |
Electronically Applied Metallic Coatings-Appendix |
|
GME OPEL 4253 |
Phosphating of Metals-Appendix |
|
GME OPEL 4255 |
Zinc Phosphate with Metal Pigmented and for Organic Coating-English Translation Available |
|
GME OPEL 4256 |
Coating Based on Zinc, Aluminium and Chromium-English Translation Available |
|
GME OPEL 500 |
Determination of Degree of Expansion of Plastic Sealing Strips and Pastes |
|
GME OPEL 600 |
Determination of Amount of Air Leakage |
|
GME OPEL 601 |
Vibration Quality of Antifriction Bearings |
|
GME OPEL 831 |
Vacuum Metallized Plastic Components, Outside |
|
GME OPEL 832 |
Vacuum Metallized Plastic Components, Inside |
|
GME OPEL 833 |
Decorative Chromium Plated Plastic Parts, Outside |
|
GME OPEL 834 |
Copper Lined Plastic Board for Printed Circuit |