|
GME GME 01117 V |
Sun Visor, Verification Part |
|
GME GME 06112 |
Water Pump - Housing Part-Related Material Specification |
|
GME GME 60156 |
Compression Properties of Metal Center Tubes and Contact Surfaces of Metal Parts with Bolt Through Holes |
|
GME GME 60159 |
Static Strength Test for Cage Nut Weld Joints-Includes Appendix A through B |
|
GME GME 60201 |
Determination of the Resistance of Automotive Components to Sulphur Dioxide in a High Humidity Environment-English Translation Available |
|
GME GME 60202 |
Determination of the Resistance of Automotive Components to High Humidity Environments-English Translation Available |
|
GME GME 60203 |
Determination of the Resistance to Corrosion of Organic Coatings under Cyclic Alternating Conditions-English Translation Available |
|
GME GME 60204 |
Determination of Resistance to Corrosion of Automotive Components by the Modified Corrodkote Test (Formerly OPEL 204)-English Translation Available |
|
GME GME 60205 |
Determination of Resistance to Corrosion of Automotive Components by Acetic Acid Salt Spray Testing (ASS)-English Translation Available |
|
GME GME 60206 |
Determination of Resistance to Corrosion of Automotive Components by Salt Spray Fog Testing (Formerly OPEL 206; Replaced By GMI 60206)-English Translation Available |
|
GME GME 60207 |
Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) (Formerly OPEL 207)-English Translation Available |
|
GME GME 60208 |
Test Method for Determining Susceptibility to Stress-Corrosion Cracking of Copper Based Alloys (Formerly OPEL 208)-English Translation Available |
|
GME GME 60209 |
Determination of Porosity of Coatings on Ferrous Materials (Formerly OPEL 209)-English Translation Available |
|
GME GME 60210 |
Test Method for Determining Resistance of Organic Coatings to Hot Water Immersion-English Translation Available |
|
GME GME 60211 |
Salt Fog Spray Testing for Electrical/Electronic Components- Replaces GMI 60211 and OPEL 211 |
|
GME GME 60212 |
Scab-Corrosion-Testing |
|
GME GME 60213 |
Determination of Resistance to Corrosion of Aluminum Radiatiors by Sea Water Acetic Acid Test (SWAAT)-English Translation Available |
|
GME GME 60220 |
Determination of Push-On and Pull-Off Forces of Hoses |
|
GME GME 60221 |
Test of Electrochemical Resistance of Elastomeric Compounds- English Translation Available |
|
GME GME 60222 |
Determination of Fuel Permeability of Hoses (Formerly OPEL 231)- English Translation Available |
|
GME GME 60223 |
Leakage Test of Sealing Systems in Fuel Line Systems (Formerly OPEL 233) |
|
GME GME 60224 |
Determination of Deposits in the Fuel System (Formerly OPEL 234; Replaced By GMI 60224)-English Translation Available |
|
GME GME 60230 |
Determination of the Force-Deflection Characteristics and Creep Properties of Elastomeric Components (Formerly OPEL 400)-English Translation Available |
|
GME GME 60231 |
Determination of the Permanent Set Characteristics of Elastomeric Components-English Translation Available |
|
GME GME 60232 |
Force-Deflection Characteristics of Elastomeric Components under Uni-Axial Stress-Includes Appendix A |
|
GME GME 60233 |
Force - Deflection Characteristics of Elastomeric Components under Bi-Axial Stress-Includes Appendix A |
|
GME GME 60234 |
Force-Deflection Characteristics of Elastomeric Components, Hysteresis Determination-Includes Appendix A |
|
GME GME 60235 |
Determination of the Torsional Force-Deflection Characteristics of Elastomeric Components under Uni-Axial Stress-English Translation Available |
|
GME GME 60236 |
Determination of Pressure Modulus and Loss Angle of Elastomeric Test Pieces-English Translation Available |
|
GME GME 60237 |
Determination of Dynamic Stiffness and Loss Angle of Elastomeric Components-English Translation Available |
|
GME GME 60238 |
Determination of the Tensile Strength and Elongation to Failure of Elastomeric Components-English Translation Available |
|
GME GME 60239 |
Determination of Dimensional Changes of Elastomeric Materials under Stress by Means of Contactless Measurement Method-Issue No 2 |
|
GME GME 60243 |
Determination of Tension Set under Constant Elongation-English Translation Available |
|
GME GME 60244 |
Determination of Adhesion of Elastomers to Glass or Painted Sheet Metal-English Translation Available |
|
GME GME 60245 |
Determination of the Adhesive Strength of Elastomer to Fabric- English Translation Available |
|
GME GME 60246 |
Determination of the Compressibility of a Cellular Elastomer under a Specified Force-English Translation Available |
|
GME GME 60247 |
Determination of the Compressibility of a Cellular Elastomer at a Defined Deflection-Appendix A |
|
GME GME 60248 |
Scraping of Coatings on Elastomers and Textile Interior Materials |
|
GME GME 60249 |
Determination of Volume and Density of Elastomers-English Translation Available |
|
GME GME 60250 |
Determination of Compression Set (Formerly OPEL 250)-English Translation Available |
|
GME GME 60251 |
Determination of the Ozone Resistance of Elastomers (Formerly Opel 251)-English Translation Available |
|
GME GME 60252 |
Determination of Indentation Hardness by Means of a Durometer (Shore A and D) (Formerly Opel 229)-English Translation Available |
|
GME GME 60253 |
Resistance of Elastomers to Fuels (Formerly OPEL 280)-English Translation Available |
|
GME GME 60254 |
Compatibility of Different Materials in Contact (Formerly OPEL 254; Replaced By GMI 60254)-English Translation Available |
|
GME GME 60255 |
Resistance of Elastomers to Liquids and Greases (Formerly OPEL 253 and OPEL 255)-English Translation Available |
|
GME GME 60256 |
Determination of Ball-Indentation Hardness of Elastomers (IRHD) - Micro Hardness Test-English Translation Available |
|
GME GME 60257 |
Determination of Tensile Stress-Strain Properties-English Translation Available |
|
GME GME 60258 |
Accelerated Ageing Test for Elastomers (Formerly OPEL 258)- English Translation Available |
|
GME GME 60259 |
Cold Resistance of Elastomers-English Translation Available |
|
GME GME 60260 |
Determination of the Permeability of Elastomers to Liquids or Vapours-English Translation Available |
|
GME GME 60261 |
Determining the Flammability of Interior Trim Materials (Formerly Opel 261; Replaced by GMI 60261)-English Translation Available |
|
GME GME 60262 |
Determination of Resistance to Protective Wax Remover of Elastomer Profiles-English Translation Available |
|
GME GME 60263 |
Determination of Resistance to Sulphur Dioxide Staining of Automotive Trim Components-English Translation Available |
|
GME GME 60264 |
Determination of Resistance to Sulphide Staining of Automotive Trim Components (Formerly OPEL 264; Replaced by GMI 60264)-English Translation Available |
|
GME GME 60265 |
Determination of Resistance to Fluid of Automotive Exterior Trim Components (Formerly OPEL 4223; Replaced by GMI 60265)-English Translation Available |
|
GME GME 60266 |
Determination of Resistance to Cleaning Agents of Automotive Trim Components-English Translation Available |
|
GME GME 60267 |
Determination of Impact Resistance of Plastic Components-English Translation Available |
|
GME GME 60268 |
Determination of Resistance to Stone Impact of Surface Coatings, Plastics and Self Adhesive Films (Formerly OPEL 4222)-English Translation Available |
|
GME GME 60269 |
Test Method for Determining the Abrasion Resistance of Metallized, Painted, Printed etc. Plastic Parts-Formerly OPEL 269 |
|
GME GME 60270 |
Test Procedure for Determining the Moisture Content of Plastic Components and Moulding Compounds-English Translation Available |
|
GME GME 60271 |
Determination of the Release of Formaldehyde from Moulded Parts for the Vehicle Interior-English Translation Available |
|
GME GME 60272 |
Compatibility of PVC-Interior Trim Materials with Amine-English Translation Available |
|
GME GME 60273 |
Determination of Light Stability-English Translation Available |
|
GME GME 60274 |
Test Method for Determining the Flexural Properties and Impact Resistance of Small Test Pieces of Plastic Materials (Dynstat Test)-English Translation Available |
|
GME GME 60275 |
Determination of Resistance to Synthetic Perspiration Solution of Automotive Trim Components-English Translation Available |
|
GME GME 60276 |
Test Method for Determining the Resistance to Odour Propagation of Trim Materials-English Translation Available |
|
GME GME 60277 |
Test Method for Determining the Press-In Force and Retaining Force of Clips for Attachment of Trim Components to Vehicle Doors-English Translation Available |
|
GME GME 60279 |
Determination of Not Used Hexapotential in Textile Fibre Fleece Moulded Parts Bonded with Phenolic Resin-English Translation Available |
|
GME GME 60280 |
Scratch and Mar Resistance Surface Condition of Plastics |
|
GME GME 60281 |
Total Carbon Contents-Replaced by GMW8081: 05/2005 |
|
GME GME 60282 |
Determination of Release of Phenol from Moulded Parts for the Vehicle Interior-English Translation Available |
|
GME GME 60283 PART 1 |
Methods of Test for Cellular and Related Materials Part 1: Determination of Apparent Density (Formerly OPEL 283, Pos. 10; Replaced by GMI 60283 Part 1)-English Translation Available |
|
GME GME 60283 PART 2 |
Methods of Test for Cellular and Related Materials Part 2: Determination of Tensile Stress-Strain Properties (Formerly OPEL 283, Pos.12; Replaced by GMI 60283 Part 2)-English Translation Available |
|
GME GME 60283 PART 3 |
Methods of Test for Cellular and Related Materials Part 3: Determination of Tear Propogation Strength (Formerly OPEL 283, Pos. 11; Replaced by GMI 60283 Part 3)- English Translation Available |
|
GME GME 60283 PART 4 |
Methods of Test for Cellular and Related Materials Part 4: Determination of Compression Set (Formerly OPEL 283, Pos. 6; Replaced by GMI 60283 Part 4)-English Translation Available |
|
GME GME 60283 PART 5 |
Methods of Test for Cellular and Related Materials Part 5: Determination of Resistance to Humidity Ageing (Formerly OPEL 283, Pos. 5; Replaced by GMI 60283 Part 5)- English Translation Available |
|
GME GME 60283 PART 6 |
Methods of Test for Cellular and Related Materials Part 6: Determination of Resistance to Heat Ageing (Formerly OPEL 283, Pos. 9; Replaced by GMI 60283 Part 6)- English Translation Available |
|
GME GME 60283 PART 7 |
Methods of Test for Cellular and Related Materials Part 7: Determination of Hardness Number (Formerly OPEL 283, Pos. 7; Replaced by GMI 60283 Part 7)-English Translation Available |
|
GME GME 60283 PART 8 |
Test Methods for Cellular and Related Materials Part 8: Determination of Compression Load Deflection (40% Compression) (Formerly OPEL 283, Pos. 8; Replaced by GMI 60283 Part 8)-English Translation Available |
|
GME GME 60286 |
Test Method for Determining the Air Permeability of Trim Materials (Formerly OPEL 286)-English Translation Available |
|
GME GME 60287 |
Determination of Resistance to Mildew Growth-English Translation Available |
|
GME GME 60290 |
Determination of Indentation Hardness of Foam Components at Constant Force (Formerly OPEL 290; Replaced by GMI 60290)-English Translation Available |
|
GME GME 60292 |
Determination of Colour Fastness and Resistance to Aritificial Light- English Translation Available |
|
GME GME 60293 |
Test Method for Determining Stiffness of Sound Deadener Pads (Formerly OPEL 293)-English Translation Available |
|
GME GME 60294 |
Test Method for Determining Chemical Resistance of Deadener Pads (Formerly OPEL 294)-English Translation Available |
|
GME GME 60295 PART 1 |
Methods of Test for Sound Deadener Pads Part 1: Determination of Flexibility (Formerly OPEL 239, Pos. 5)-English Translation Available |
|
GME GME 60295 PART 10 |
Methods of Test for Sound Deadener Pads Part 10: Test for Resistance to Penetration |
|
GME GME 60295 PART 11 |
Methods of Test for Sound Deadener Pads Part 11: Test for Silicone Etc. Contaminants |
|
GME GME 60295 PART 12 |
Methods of Test for Sound Deadener Pads Part 12: Test for Formability (Formerly OPEL 239, Pos. 16) |
|
GME GME 60295 PART 13 |
Methods of Test for Sound Deadener Pads Part 13: Test for Paint Acceptance-English Translation Available |
|
GME GME 60295 PART 2 |
Methods of Test for Sound Deadener Pads Part 2: Determination of Blocking (Formerly OPEL 239, Pos.6)-English Translation Available |
|
GME GME 60295 PART 3 |
Methods of Test for Sound Deadener Pads Part 3: Test for Fusability- English Translation Available |
|
GME GME 60295 PART 4 |
Methods of Test for Sound Deadener Pads Part 4: Determination of Loss Factor |
|
GME GME 60295 PART 5 |
Methods of Test for Sound Deadener Pads Part 5: Test for Resistance to Heat (Formerly Opel 239, Pos. 9) |
|
GME GME 60295 PART 6 |
Methods of Test for Sound Deadener Pads Part 6: Test for Low Temperature Resistance (Formerly OPEL 239, Pos. 10) |
|
GME GME 60295 PART 7 |
Methods of Test for Sound Deadener Pads Part 7: Test for Solubility in Thinners-English Translation Available |
|
GME GME 60295 PART 8 |
Methods of Test for Sound Deadener Pads Part 8: Test for Resistance to Phosphating Solutions-English Translation Available |
|
GME GME 60295 PART 9 |
Methods of Test for Sound Deadener Pads Part 9: Test for Adhesion (Formerly OPEL 239, Pos. 13) |
|
GME GME 60296 |
Testing of VCI (Volatile Corrosion Inhibitor) Paper (Formerly OPEL 296) |
|
GME GME 60300 |
Test Method for Conditioning of Plastic Materials, Textiles, Fibreboards, Wood, Etc.-English Translation Available |
|
GME GME 60301 |
Test Method for Determining Weight per Unit Area-Replaced by GMW3182 |
|
GME GME 60302 |
Test Method for Determining "Softness" of Trim Materials (Formerly OPEL 302)-English Translation Available |
|
GME GME 60303 |
Test Method for Determining Thickness of Trim Materials (Formerly Opel 300; Opel 303)-English Translation Available |
|
GME GME 60304 |
Test Method for Determining Resistance to "Spotting" of Trim Materials by Water and Saline Solution (Formerly OPEL 304)-English Translation Available |
|
GME GME 60305 |
Test Method for Determining the Stretch and Permanent Set Characteristics of Textiles and Leathercloths (Formerly OPEL 305)-English Translation Available |
|
GME GME 60306 |
Test Method for Determining the Low Temperature Resistance of Automotive Trim Materials (Formerly OPEL 306; Replaced by GMI 60306)-English Translation Available |
|
GME GME 60307 |
Test Method for Determining the Temperature Stability of Automotive Trim Materials (Formerly OPEL 307; Replaced by GMI 60307)-English Translation Available |
|
GME GME 60308 |
Test Method for Determining the Melting Range of Plastic Materials (Formerly OPEL 308; Replaced by GMI 60308)-English Translation Available |
|
GME GME 60309 |
Test Method for Determining the Compatibility of Upholstery Trim Materials in Contact-Replaced by GMW4659 |
|
GME GME 60310 |
Test Method for Determining the Hydrosulphite Resistance of Textile Fabrics (Formerly OPEL 310)-English Translation Available |
|
GME GME 60311 |
Test Method for Determining the Friction Properties of Seat Upholstery Materials (Formerly OPEL 311)-English Translation Available |
|
GME GME 60312 |
Test Method for Determining Sound Attenuation Characteristics by the Apamat Test (Formerly OPEL 312)-English Translation Available |
|
GME GME 60313 |
Test Method for Determining Sound Attenuation Characteristics by the Loudspeaker Enclosure Test (Formerly OPEL 313)-English Translations Available |
|
GME GME 60314 |
Test Method for Determining the Weight per Unit Area of the PVC Coated Upholstery Materials (Formerly OPEL 314; Replaced by GMI 60314)-English Translation Available |
|
GME GME 60315 |
Determination of the Resistance to Peeling of Adhered Body Trim Materials (Formerly OPEL 315)-English Translation Available |
|
GME GME 60316 |
Determination of the Resistance to Heat Adhered Body Trim Materials (Formerly OPEL 316)-English Translation Available |
|
GME GME 60317 |
Determination of Thread Count and Thread Density of Woven Fabrics- English Translation Available |
|
GME GME 60318 |
Test Method for Determining the Resistance to Peel of Self-Adhesive Tapes and Films-Includes Appendix A |
|
GME GME 60319 |
Test Method for Determining the Resistance to Discolouration by Adhesives of Leathercloths and Plastic Films-English Translation Available |
|
GME GME 60320 |
Test Method for Determining the Proportions of Animal Hair and Rubber in Upholstery Materials (Formerly OPEL 320)-English Translation Available |
|
GME GME 60321 |
Test Method for Determining the Proportions of Vegetable Fibres and Rubber in Upholstery Materials (Formerly OPEL 321)-English Translation Available |
|
GME GME 60322 |
Test Method for Determining the Resistance to Peel of Plastic Films Adhered to Moulded Plastics (Formerly OPEL 322)-English Translation Available |
|
GME GME 60323 |
Determination of Weave Density of Knitted Fabrics-English Translation Available |
|
GME GME 60324 |
Test Method for Determining Water Vapour Permeability of Upholstery Trim Materials (Formerly OPEL 324)-English Translation Available |
|
GME GME 60325 |
Test Method for Determining Tensile Properties of Body Trim, Sealing Materials, Deadeners Etc.-English Translation Available |
|
GME GME 60326 |
Test Method for Evaluating Fogging Characteristics of Trim Materials- Replaced by GMW3235 |
|
GME GME 60327 |
Test Method for Dimensional Stability of Fibreboards, Cardboard etc. under Humid Conditions (Formerly OPEL 327)-English Translation Available |
|
GME GME 60328 |
Compressibility of Upholstery Trims Strips (Formerly OPEL 228)- English Translation Available |
|
GME GME 60329 |
Test Method for Determining the Resistance to Thread Tear-Out of Trim Materials-English Translation Available |
|
GME GME 60330 |
Colour Fastness to Rubbing of Textiles and Coated Fabrics-Replaced by ISO 105-X12 and ISO 105-A03 |
|
GME GME 60331 |
Test Method for Determining "Pilling" Resistance of Upholstery Materials (Formerly OPEL 235)-English Translation Available |
|
GME GME 60332 |
Test Method for Determining Resistance of Textile Trim Materials (Formerly OPEL 332)-English Translation Available |
|
GME GME 60333 |
Test Method for Determining the Residue on Ignition (Ash) of Polymeric Materials-English Translation Available |
|
GME GME 60334 |
Test Method for Determining the Tear Strength of Textiles and Coated Fabrics (Single Tear Method)-English Translation Available |
|
GME GME 60335 |
Determining the Laminate Adhesive Strength or Leathercloths and other Laminated Trim Materials-Replaced by GMW3220 |
|
GME GME 60336 |
Test Method for Determining the Heat Ageing Resistance of Upholstery Trim Materials (Formerly OPEL 336; Replaced by GMI 60336)-English Translation Available |
|
GME GME 60337 |
Test Method for Determining the Breaking Strength of Components Made from Compressed Fibrous Materials (Formerly OPEL 337)-English Translation Available |
|
GME GME 60338 |
Determination of the Resistance to Snagging of Textile-English Translation Available |
|
GME GME 60339 |
Test Method for Determining Formation of Creases on Foamed Headrests-English Translation Available |
|
GME GME 60340 |
Test Method for Determining the Heat Ageing Resistance of Plastic Films (Formerly OPEL 340; Replaced by GMI 60340)-English Translation Available |
|
GME GME 60341 |
Test Method for Determining the Seam Strength of Upholstery Trim Materials (Formerly OPEL 341)-English Translation Available |
|
GME GME 60342 |
Test Method for Determining the Compression Characteristics of Cushioning Materials under Static Stress (Formerly OPEL 228)-English Translation Available |
|
GME GME 60343 |
Test Method for Determining the Adhesive Strength of Finishes on Hardboards, Cardboards, Plastic Components Etc. (Formerly OPEL 343)-English Translation Available |
|
GME GME 60344 |
Test Method for Evaluating the Electrostatic Properties of Upholstery Materials by Surface Resistance Measurements (Formerly OPEL 222)-English Translation Available |
|
GME GME 60345 |
Test Method for the Determination of the Resistance to Wear of Automotive Materials (Formerly OPEL 345)-English Translation Available |
|
GME GME 60346 |
Test Method for Determining the Bursting Strength, and Deformation at Burst of Leathercloths, Textiles, Paper and Board-English Translation Available |
|
GME GME 60347 |
Test Method for Determining the Dielectric Welding Properties of Upholstery Materials (Formerly OPEL 205; Replaced by GMI 60347)-English Translation Available |
|
GME GME 60348 |
Test Method for Determining the Bursting Strength of Cardboard, Fibreboard and Similar Rigid Materials-English Translation Available |
|
GME GME 60349 |
Test Method for Determining the Cohesive Strength of Felts and Similar Materials (Formerly OPEL 224)-English Translation Available |
|
GME GME 60350 |
Test Method for Determining Wicking Resistance of Textiles, Paper, Cardboard Etc.-English Translation Available |
|
GME GME 60351 |
Test Method for Determining Moisture Content, Water Absorption and Thickness Swell of Fibreboards, Chipboards, Cardboard Etc.-English Translation Available |
|
GME GME 60352 |
Test Method for Determining Density of Paper, Cardboard, Wood, Fibreboards, Chipboards Etc.-English Translation Available |
|
GME GME 60353 |
Test Method for Determining Bitumen in Paper, Cardboard and Other Materials-English Translation Available |
|
GME GME 60354 |
Test Method for Determining the Bending Strength of Chipboards and Similar Materials-English Translation Available |
|
GME GME 60355 |
Test Method for Determining the Cohesive Strength of Chipboards and Similar Materials-English Translation Available |
|
GME GME 60368 |
Determination of Abrasion Resistance of Artificial Leather-English Translation Available |
|
GME GME 60369 |
Test Method for Determining the "Softness" of Leather-English Translation Available |
|
GME GME 60370 |
Test Method for Determining Mink Pull-Out by Automotive Upholstery Materials-English Translation Available |
|
GME GME 60371 |
Test Method for Determining the Tear Strength of Textiles and Coat Fabrics (Trapezoid Method)-English Translation Available |
|
GME GME 60372 |
Determining the Colour Fastness to Daylight of Textiles and Coated Fabrics-Replaced by GMW3417 |
|
GME GME 60373 |
Test Method for Determining the Oil Repellancy of Fabrics-English Translation Available |
|
GME GME 60374 |
Test Method for Determining the Water Repellancy of Fabrics-English Translation Available |
|
GME GME 60375 |
Test Method for Determining the Dye Stability of Textiles (Colour Fastness to Water)-English Translation Available |
|
GME GME 60376 |
Test Method for Determining Tuft Pull Out Resistance of Carpets- English Translation Available |
|
GME GME 60377 |
Test Method for Determining the Flex Cracking Resistance of Coat Fabrics-English Translation Available |
|
GME GME 60378 |
Test Method for Determining the Blocking Resistance of Trim Materials-English Translation Available |
|
GME GME 60379 |
Test Method for Determining the Proportions of Binary Mixtures of Cellulose and Polyester Fibres in Upholstery Materials-English Translation Available |
|
GME GME 60380 |
Determination of the Press-Through Force of Trim Materials-English Translation Available |
|
GME GME 60382 |
Test Method for Determining Tensile Properties for Leather of the Vehicle Interior |
|
GME GME 60400 |
Test Method for Determining the Resistance to Abrasion of Organic Coatings (Formerly OPEL 295)-English Translation Available |
|
GME GME 60401 |
Cross Hatch Test of Organic Coatings-Includes Appendix A |
|
GME GME 60402 |
Determining the Scratch Resistance of Organic Coating |
|
GME GME 60403 |
Resistance of Organic Coatings to Colour Change by Fuel Oil Soot (Formerly OPEL 288)-English Translation Available |
|
GME GME 60404 |
Resistance of Organic Coatings to Surface Deterioration by Chemical Action (Formerly OPEL 289)-English Translation Available |
|
GME GME 60405 |
Test Method for Determining the Impact - Saline Solution Resistance of Organic Coatings (Formerly OPEL 4221)-English Translation Available |
|
GME GME 60406 |
Resistance of Organic Coatings, Plastics and Adhered Films to Surface Deterioration by Anti-Freeze Solution (Formerly OPEL 4224)-English Translation Available |
|
GME GME 60407 |
Test Method for Determining the Impact Resistance of Organic Coatings (Formerly OPEL 4226)-English Translation Available |
|
GME GME 60408 |
Resistance of Organic Coatings to Diluted Sulphuric Acid at High Temperatures |
|
GME GME 60409 |
Resistance of Organic Coatings to Battery Acid at Room Temperature-English Translation Available |
|
GME GME 60410 |
Adhesion of Organic Coatings After Storage in Warm Water - Delamination Test-English Translation Available |
|
GME GME 60411 |
Accelerated Outdoor Exposure-English Translation Available |
|
GME GME 60412 |
Orange Peel Evaluation of Painted Surfaces-English Translation Available |
|
GME GME 60413 |
Color Measurement and Visual Comparisons of Paint Masters and Car Bodies-Includes Appendix A-B |
|
GME GME 60414 |
Colour Measurement and Visual Comparisons on Interior Plastic Parts |
|
GME GME 60417 |
Determination of Tooth Shearing Strength |
|
GME GME 60430 |
Determination of the Tensile Strength of Adhesives for Metals and Adhesively Bonded Metal Joints (Formerly OPEL 326)-English Translation Available |
|
GME GME 60431 |
Determination of the Strength of Adhesives for Metals and Adhesively Bonded Metal Joints: T - Peel Test-English Translation Available |
|
GME GME 60432 |
Determination of the Strength of Adhesives for Metals and Adhesively Bonded Metal Joints: Shear Strength of Single Lap Joints in Shear by Tension Loading-English Translation Available |
|
GME GME 60433 |
Evaluation of Adhesion of Adhesives and Sealants |
|
GME GME 60434 |
Washout Resistance of Adhesives and Sealants applied to Body-in- White |
|
GME GME 60435 |
Evaluation of Brushability of Sealing Materials and Preserver-English Translation Available |
|
GME GME 60436 |
Evaluation of Volume Expansion of Adhesives and Sealing Materials- English Translation Available |
|
GME GME 60440 |
Expanded Adhesive Bond Gluing Component-English Translation Available |
|
GME GME 60445 |
Determination of Penetrationability of Protective Wax-English Translation Available |
|
GME GME 60450 |
Determination of Heat Stability of Brake Fluids (Formerly GME 05501; Replaced by GMI 60450)-English Translation Available |
|
GME GME 60451 |
Vacuum Behavior of Brake Fluid-English Translation Available |
|
GME GME 60460 |
Hydrolytic Resistance of Polyamide to Coolants |
|
GME GME 60461 |
Evaluation of Cleaning and Antifreeze Additives for Screen Washer Systems-English Translation Available |
|
GME GME 60462 |
Ultrasonic Testing of Resistance Weld Spots-Replaced by GME 60462 With all Parts. |
|
GME GME 60462- 1 |
Ultrasonic Testing of Resistance Weld Spots Part 1: General-Replaces GME 60462; Includes Appendix A Thru D |
|
GME GME 60462- 2 |
Ultrasonic Testing of Resistance Weld Spots Part 2: Parameter Determination-Replaces GME 60462; Includes Appendix A thru D |
|
GME GME 60471 |
Determination of Tearing Force and Residual Tearing Force of Toothed Belts |
|
GME GME 60472 |
Determination of Scratch Resistance of Organic Coatings - Simulation of Car Wash Installations-Includes Appendix A |
|
GME GME14017 |
Determining the Flow Characteristics of Adhesives and Sealants using a Flowmeter |
|
GME GME14025 |
Test Piece Preparation for Testing of Adhesives and Sealants applied to Body-in-White |
|
GME GME14049 |
Stability of Textiles and Plastics against Mechanical Load- Includes Appendix A-B |
|
GME GME14074 |
Sunscreen and Insect Repellent Resistance |
|
GME GME4093 |
Determining the Tear Force of Leather |
|
GME GME4682 |
Schedule for Powertrain Durability Road Test |
|
GME GME6867 |
Accelerated Ageing Test for Polymer Safety Parts |
|
GME GME7061 |
Determination of Residual Dirt on Finished Engine and Gear Components |
|
GME GME7470 |
Metallographical Analysis of Rolled Bearing Radius of Crankshafts-Includes Appendix A |
|
GME GME8081 |
Static Headspace GC-MS for Interior Materials |
|
GME GME8618 |
Determination of Abrasion Resistance of Protection Hoses |
|
GME GME8688 |
Resistance to Crankcase Ventilation Gases |
|
GME GME8797 |
Stability of Textile Decoration Materials against Mechanical Load- Includes Appendix A-D |
|
GME GMI 01106 R |
Package Clearance of Seat Components, Requirement Part (Formerly GME 01106 R)-English Translation Available, ITDC Release, Draft for Harmonization |
|
GME GMI 01107 V |
Front Seat Structure Lifecycle Durability, Verification Part |
|
GME GMI 01108 V |
Mechanical Seat-Length Adjuster, Verification Part |
|
GME GMI 01109 V |
Manual Seat-Height Adjuster, Verification Part |
|
GME GMI 01110 V |
Manual Seat Back Adjustment, Verification Part-English Translation Available, ITDC Release, Draft for Harmonization |
|
GME GMI 01111 R |
Electrical Seat Adjuster, Requirement Part-Replaced by GME 01111 R |
|
GME GMI 01111 V |
Electrical Seat Adjuster, Verification Part-Replaced by GME 01111 V |
|
GME GMI 12514 R |
Switches, Requirement Part (Formerly QT 126514)-English Translation Available, ITDC Update, New Release, Draft for Harmonization |
|
GME GMI 12528 |
Blade Type Electric Fuse (Formerly GME 12528) |
|
GME GMI 60155 |
Static Load Capacity of Vehicle Jacks (Formerly Opel 156) |
|
GME GMI 60157 |
Static Strength of Tension-Limiting Stops in Hydraulic Vibration Dampers (Formerly QT 030003) |
|
GME GMI 60206 |
Determination Resistance to Corrosion of Automotive Components by Salt Spray Fog Testing (Formerly GME 60206)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI 60211 |
Salt Fog Spray Testing for Electrical/Electronic Components- Replaced by GME 60211 |
|
GME GMI 60220 |
Determination of Push-on and Pull-off Forces of Hoses (Formerly GME 60220)-English Translation Available, ITDC Release, Draft for Harmonization |
|
GME GMI 60224 |
Determination of Deposits in the Fuel System (Formerly GME 60224) |
|
GME GMI 60225 |
Determination of Residual Dirt on Cylinder Heads, Cylinder Blocks and Bed Plates (Fam 0), Blank and Semi-Finished Parts-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI 60245 |
Determination of the Adhesive Strength of Elastomer to Fabric (Formerly GME 60245)-English Translation Available |
|
GME GMI 60246 |
Determination of the Compressibility of a Cellular Elastomer under a Specified Force-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI 60254 |
Determination of Compatibility of Different Materials in Contact (Formerly GME 60254) |
|
GME GMI 60261 |
Test Method for Determining the Flammability of Interior Trim Materials-Replaced by GMW3232 |
|
GME GMI 60262 |
Determination of Resistance of Protective Wax Remover of Elastomer Profiles (Formerly GME 60262) |
|
GME GMI 60263 |
Determination of Resistance to Sulphur Dioxide Staining of Automotive Trim Components (Formerly GME 60263)-English Translation Available |
|
GME GMI 60264 |
Determination of Resistance to Sulphide Staining of Automotive Trim Components (Formerly GME 60264)-English Translation Available |
|
GME GMI 60265 |
Determination of Resistance to Fluid of Automotive Exterior Trim Components (Formerly GME 60265)-English Translation Available |
|
GME GMI 60266 |
Determination to Resistance to Cleaning Agents of Automotive Trim Components (Formerly GME 60266)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI 60267 |
Determination of Impact Resistance of Plastic Components (Formerly GME 60267)-English Translation Available |
|
GME GMI 60270 |
Test Procedure for Determining the Moisture Content of Plastic Components and Moulding Compounds (Formerly GME 60270)-English Translation Available |
|
GME GMI 60272 |
Compatibility of PVC-Interior Trim Materials with Amines (Formerly GME 60272)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI 60275 |
Resistance to Synthetic Perspiration Solution of Automotive Trim Components (Formerly GME 60275) |
|
GME GMI 60283 PART 1 |
Procedures of Test for Cellular and Related Materials Part 1: Determination of Apparent Density (Formerly GME 60283 Part 1)-English Translation Available |
|
GME GMI 60283 PART 2 |
Procedures of Test for Cellular and Related Materials Part 2: Determination of Tensile Stress-Strain Properties (Formerly GME 60283 Part 2)-English Translation Available |
|
GME GMI 60283 PART 3 |
Procedures of Test for Cellular and Related Materials Part 3: Determination of Tear Propagation Strength (Formerly GME 60283 Part 3)-English Translation Available |
|
GME GMI 60283 PART 4 |
Procedures of Test for Cellular and Related Materials Part 4: Determination of Compression Set (Formerly GME 60283 Part 4)-English Translation Available |
|
GME GMI 60283 PART 5 |
Procedures of Test for Cellular and Related Materials Part 5: Determination of Resistance to Humidity Ageing (Formerly GME 60283 Part 5) |
|
GME GMI 60283 PART 6 |
Procedures of Test for Cellular and Related Materials Part 6: Determination of Resistance to Heat Ageing (Formerly GME 60283 Part 6)-English Translation Available |
|
GME GMI 60283 PART 7 |
Procedures of Test for Cellular and Related Materials Part 7: Determination of Hardness Number |
|
GME GMI 60283 PART 8 |
Procedures of Test for Cellular and Related Materials Part 8: Determination of Compression Load Deflection (40 % Compression) (Formerly GME 60283 Part 8)-English Translation Available |
|
GME GMI 60284 |
Ageing Resistance / Brake Fluid Compatibility of Brake Hoses- English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI 60285 |
Stricter Testing of Brake Hoses Ageing Resistance-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI 60288 |
Abrasion Test for Textile Fabrics-Replaced by GME 60288 |
|
GME GMI 60289 |
Compatibility of Organic Materials-Replaced By GMW4659 |
|
GME GMI 60290 |
Determination of Indentation Hardness of Foam Components at Constant Force (Formerly GME 60290)-English Translation Available |
|
GME GMI 60300 |
Test Procedures for Conditioning of Plastic Materials, Textiles, Fibreboards, Wood, Etc. (Formerly GME 60300)-English Translation Available |
|
GME GMI 60306 |
Test Method for Determining the Low Temperature Resistance of Automotive Trim Materials (Formerly GME 60306)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI 60307 |
Test Method for Determining the Temperature Stability of Automotive Trim Materials (Formerly GME 60307) |
|
GME GMI 60308 |
Test Procedure for Determining the Melting Range of Plastic Materials (Formerly GME 60308)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI 60314 |
Test Method for Determining the Weight per Unit Area of the Backing of PVC-Coated Upholstery Materials (Formerly GME 60314) |
|
GME GMI 60333 |
Test Method for Determining the Residue on Ignition (Ash) of Polymeric Materials-English Translation Available; TDCE Release; Replacement for GME 60333 |
|
GME GMI 60336 |
Test Method for Determining the Heat Ageing Resistance of Upholstery Trim Materials (Formerly GME 60336) |
|
GME GMI 60340 |
Test Method for Determining the Heat Ageing Tensile Extension Properties of Plastic Films(Formerly GME 60340) |
|
GME GMI 60347 |
Bond Strength of Dielectrically Produced Welding Seams of Assembly Components in Body Interior Equipment-English Translation Available; Formerly GME 60347 |
|
GME GMI 60382 |
Test Method for Deterining Tensile Properties for Leather of the Vehicle Interior-Replaced by GME 60382 |
|
GME GMI 60450 |
Determination of Heat Stability of Brake Fluids (Formerly GME 60450)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI 60451 |
Vacuum Behavior of Brake Fluid (Formerly GME 60450) |
|
GME GMI 60459 |
Measurement of Voltage Potential Difference between Organic and Metallic Materials-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME STD 1077 |
Determination of fastness to rubbing Rubber, plastic and coloured textile materials |
|
GME STD 1078 |
Determination of shrinkage Textile materials. |
|
GME STD 1082 |
Fogging Organic material, Testing Method |
|
GME STD 1248 |
Assessment of sealing quality Anodic oxidation coatings on aluminium |
|
GME STD 1331 |
Neutral salt spray test (NSS test) |
|
GME STD 1673 |
Paint and enamel Resistance to scab-corrosion |
|
GME STD 1926 |
Paint and enamel Determination of colour |
|
GME STD 202 |
Determination of corrosion resistance |
|
GME STD 203 |
Stiffness. Determination of test bending length |
|
GME STD 204 |
Adhesion Determination of bonding strength of adhesive |
|
GME STD 205 |
Adhesion Flexible multilayer material |
|
GME STD 206 |
Gelation test. Determination of the gelation tendencies of textile-backed PVC plastic |
|
GME STD 210 |
Heat resistance Determination of sagging point of adhesive |
|
GME STD 211 |
Water and moisture absorption |
|
GME STD 212 |
Adhesion Impact testing in cold |
|
GME STD 213 |
Adhesion protective skin/paper |
|
GME STD 233 |
Colour Fastness |
|
GME STD 3157 |
Determination of volumetric change after curing |
|
GME STD 3320 |
Colour fastness to perspiration. Leather |
|
GME STD 3595 |
Magnetic force of structure-borne sound insulating materials |
|
GME STD 3976 |
Assessment of adhesion High pressure water test Paint and enamel |
|
GME STD 417 |
Resistance to wear. |
|
GME STD 423 |
Dynamic fatigue |
|
GME STD 465 |
Determination of crevice penetration |
|
GME STD 5008 |
Water resistance Paint and enamel |
|
GME STD 5029 |
Scratch resistance |
|
GME STD 5055 |
Corrosion resistance, surface treatment |
|
GME STD 5060 |
Determination of nitrocarburizing depth in steel |
|
GME STD 5074 |
Colour/Gloss tolerances |
|
GME STD 5075 |
Assessment of appearance, interior surface material |
|
GME STD 660 |
Measurement of coating thickness, microscopical method Metallic and oxide coatings |
|
GME STD 854 |
Paint and enamel paint Determination of specular gloss and haze |
|
GME STD 857 |
Paint and enamel Determination of adhesion, crosscut method |
|
GME STD 865 |
Paint and enamel Determination of scratch resistance by pencils |
|
GME TM 920800 |
Elastic Tape |