|
GME GME R-4/7- 1 |
High Speed Test-:2006 |
|
GME GME R-4/7- 6 |
Stop and Go Test, DPG |
|
GME GME R-6- 1 |
Driving Schedule - Engine Test (Program No. 2 PD) |
|
GME GME R-6- 11 |
Water Passage-REPLACED BY GME8754 |
|
GME GME R-6- 12 |
Driving Behavior of Engines in Test Car |
|
GME GME R-6- 16 |
Spark Knock under Hot Engine and High Altitude Conditions |
|
GME GME R-6- 17 |
Road Test to Determine the Knock Limits of an Engine |
|
GME GME R-6- 18 |
After-Running of an Engine and Road Test |
|
GME GME R-6- 2 |
Oil Leakage, Leaking Engines |
|
GME GME R-6- 20 |
Driving Schedule for Powertrain Durability Test, Simulation of Open Road Test Eisenach-Rhön DPG 32-Includes Appendix A |
|
GME GME R-6- 3 |
Driving Schedule for Passenger Cars with Diesel Engine; DPG 11 |
|
GME GME R-6- 5 |
Run - In - Program, (Engine) (former program No. 21 PD) |
|
GME GME R-6- 6 |
Program Mud Test |
|
GME GME R-6A04- 1 |
Crank Case Ventilation |
|
GME GME R-6A1- 1 |
Blow by Measurement |
|
GME GME R-6D- 1 |
Piston Noise Evaluation in the Vehicle |
|
GME GME R-6G04- 1 |
Oil Dipstick Marking |
|
GME GME R-6G- 1 |
Engine Oil Pressure Characteristics and Aeration |
|
GME GME R-6G- 2 |
Development of Cooling System |
|
GME GME R-6K/X- 1 |
Subjective Rating of Tooth Belt Noise |
|
GME GME R-6K- 1 |
Engine Cooling System |
|
GME GME R-6K- 2 |
Procedure for Development and Determination of the Cooling System of Otto- and Diesel Engines |
|
GME GME R-6M1- 2 |
Determination of Throttle Closing Time According to FMVSS 124 |
|
GME GME R-6Q- 1 |
Function Test of Engine Mounts |
|
GME GME R-6Q- 3 |
Engine and Exhaust Movements |
|
GME GME R-6R- 1 |
Engine Durability Test |
|
GME GME R-6X- 1 |
Driving Schedule for Camshaft Testing, DPG 25 |
|
GME GME R-6X- 2 |
Driving Schedule for Camshaft Testing, DPG 26 |
|
GME GME R-6X- 3 |
Durability Driving Schedule for Camshaft Testing |
|
GME GME R-6Y01- 1 |
Alternator Capacity (Urban Cycle) |
|
GME GME R-6Y03- 1 |
Water Through Test, Ignition System-Replaced by GMI R-6Y03- 1 |
|
GME GME R-6Y03- 4 |
Ignition System in High Humidity Environments-Replaced by GMI R-6Y03- 4 |
|
GME GME R-6Y- 1 |
Temperature Measurement of Electrical Units in the Engine Compartment under Simulated Customer Conditions |
|
GME GME R-6Y- 2 |
Engine Misfiring Test - Procedure (Program No. 12) |
|
GME GME R-7- 2 |
Shift Function and Shift Comfort |
|
GME GME R-7- 3 |
Shift Lever Shake and Gear Jump-Out on FWD Vehicles |
|
GME GME R-7- 4 |
Water Passage Automatic Transmission (AT) and Automatically Shifted Manual Transmission (MTA) |
|
GME GME R-7- 5 |
Frankfurt Customer Course, Fluid/Air Cooler Test with Defective Bypass Valve |
|
GME GME R-7- 6 |
Taunus Customer Course, Fluid/Air Cooler Test with Defective Bypass Valve |
|
GME GME R-7B01B- 1 |
Clutch Assembly - Grabbing Test |
|
GME GME R-7B01B- 2 |
Clutch Assembly - Slipping Test-Replaced by GMI R-7B01B-2 |
|
GME GME R-7B01B- 3 |
Clutch Assembly - Stall Test |
|
GME GME R-7B01B- 4 |
Clutch Assembly - Stop and Go Test |
|
GME GME R-7B01B- 5 |
Driving Schedule for Automatic Transmission Flexplate Testing DPG 29- Includes Appendix A |
|
GME GME R-7B01D- 12 |
Synchronizer Abuse Test |
|
GME GME R-7B01D- 7 |
Hill Start with Trailer |
|
GME GME R-7B03- 10 |
Cold Test Automatic Transmission |
|
GME GME R-7B03- 11 |
Climbing Capacity Test |
|
GME GME R-7B03- 2 |
Rock Cycle Test Automatic Transmission |
|
GME GME R-7B03- 4 |
Stop and Go Test of Vehicles with Automatic Transmission (AT) and Automatically Shifted Manual Transmission (MTA) |
|
GME GME R-7B03- 5 |
AISIN Warner AW 20 Abuse Test D-->R |
|
GME GME R-7B03- 6 |
High Speed and Hot Idle Test of Vehicles with Automatic Transmission |
|
GME GME R-7B03- 7 |
High Speed and Oil Spillage Test of Vehicles with Automatic Transmission |
|
GME GME R-7B03- 8 |
Towing Test of Vehicles with Automatic Transmission |
|
GME GME R-7B03- 9 |
Outfit Trailer-Towing Test for Vehicles with Automatic Transmission (AT/CVT) and Automatically Shifted Manual Transmission (MTA)-Includes Appendix A |
|
GME GME R-7B03F- 1 |
Parking Pawl Test |
|
GME GME R-7B1D- 10 |
Abuse Test Reverse Gear (Manual Transmission) |
|
GME GME R-7B1D- 11 |
Reverse Gear Test (Vechicle with Manual Transmission) |
|
GME GME R-7B1D- 13 |
High Performance Test of Synchromesh Mechanisms Dudenhofen Proving Ground |
|
GME GME R-7B1D- 8 |
Hill Start Test without Trailer (Vechicles with Manual Transmission) |
|
GME GME R-7B1D- 9 |
Abuse Test Forward Gears (Manual Transmission) |
|
GME GME R-7B- 2 |
Test for 4-Speed Manual Transmissions (Schedule No. 8 Dudenhofen PG) |
|
GME GME R-7B- 3 |
Driving Schedule for the Durability Test of 5-Speed-Transmissions |
|
GME GME R-7B3- 3 |
Start Test (AT) |
|
GME GME R-7B- 4 |
Noise Evaluation, Idle Rattle (Manual Transmission) |
|
GME GME R-7B- 5 |
6-Speed Transmission, DPG 24.1 |
|
GME GME R-7B- 6 |
Trailer - Towing Test on Mountain Roads for Vehicles with Automatic Transmission |
|
GME GME R-8A- 1 |
Useable Fuel Tank Capacity Measurement |
|
GME GME R-8C- 1 |
Driving Schedule for the Conditioning of Absorption Mufflers, DPG 17 |
|
GME GME R-8C- 2 |
Exterior Noise - Type Approval Test |
|
GME GME R-8C- 3 |
Muffler Outlet Noise-Replaced by GME L-8C-7 |
|
GME GME R-8C- 4 |
Basel Schedule, DPG 30 |
|
GME GME R-8E- 1 |
Converter, Durability Test |
|
GME GME4670 |
Air Induction, Water Intrusion in Air Cleaner, Combustion Chamber and Crankcase-Replaced by GME8755 |
|
GME GME8712 |
Fuel Supply-Includes Appendix A-B |
|
GME GME8713 |
Fuel Tank Capacity and Fill Performance-Includes Appendix A |
|
GME GME8714 |
Tank Vent System and Fuel Smell Prevention-Includes Appendix A |
|
GME GME8716 |
Intrusion Protection of Tank Vent System-Includes Appendix A |
|
GME GME8755 |
Rain Test for Air Induction Systems-Includes Appendix A |
|
GME GME8756 |
Snow Test for Air Induction Systems-Includes Appendix A |
|
GME GMI R-6D- 1 |
Piston Noise Evaluation in the Vehicle (formerly GME R-6D-1)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-6D- 2 |
Piston Seizure Test in the Vehicle with Cold Engine-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-6G04- 1 |
Oil Dipstick Marking (formerly GME R-6G04-1)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-6G- 2 |
Development of Cooling System (formerly GME R-6G-2)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-6K- 1 |
Engine Cooling System for Europe (formerly GME R-6K-1)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-6K- 2 |
Development and Tuning Work on the Cooling Circuit of Gasoline and Diesel Engines (formerly GME R-6K-2)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-6Y01- 1 |
Vehicle Charging Balance-English Translation Available; ITDC Release, Draft for Harmonization; Replaces GME R-6Y01-1; Includes Appendix July 1996 |
|
GME GMI R-6Y03- 1 |
Deep Wade Through-English Translation Available |
|
GME GMI R-6Y03- 4 |
Ignition System in High Humidity Environments-Replaced By GMI L-6Y03- 1 and GMI R-6y03-1 |
|
GME GMI R-6Y- 1 |
Temperature Measurement of Electrical Units in the Engine Compartment Under Simulated Customer Conditions-Replaced by GME R-6Y-1 |
|
GME GMI R-7- 2 |
Shifting Function and Shifting Comfort (Formerly GME R-7-2)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-7B01B- 1 |
Clutch Assembly - Grabbing Test (Formerly GME R-7B01B-1)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-7B01B- 2 |
Clutch Assembly - Slipping Test (Formerly GME R-7B01B-2)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-7B01B- 3 |
Clutch Assembly - Stall Test (Formerly GME R-7B01B-3)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-7B01B- 4 |
Clutch Assembly - Stop and Go Test (Formerly GME R-7B01B-4)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-7B01D- 7 |
Hill Start with Trailer (Formerly GME R-7B01D-7)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-7B03- 4 |
Stop and Go Test of Vehicles with Automatic Transmission-English Translation Available; Replaced by GME R-7B03-4 |
|
GME GMI R-7B03- 7 |
High Speed and Oil Spillage Test of Vehicles with Automatic Transmission (Formerly GME R-7b03-7) |
|
GME GMI R-7B03- 9 |
Outfit Trailer-Towing Test for Vehicles with Automatic Transmission (Simulated with Towing Dynamometer MLD-2)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-7B- 4 |
Noise Evaluation, Idle Rattle (Manual Transmission) (Formerly GME R-7B- 4)-English Translation Available; ITDC Release, Draft for Harmonization |
|
GME GMI R-7B- 6 |
Trailer - Towing Test on Mountain Roads for Vehicle with Automatic Transmission-Replaced by GME R-7B-6; ITDC Release, Draft for Harmonization |
|
GME GMI R-7E- 1 |
Abuse Test for the External Shifting and Add-On Parts/ Determination of the Minimum Distance to the Body-English Translation Available; ITDC Release, Draft for Harmonization |