|
GMNA GM1002M |
Standard Requirements - Plastics |
|
GMNA GM4351M |
Decorative Second Surface Finishes on Plastic Parts GM4351M (Type A) Interior Applications GM4351M (Type B) Exterior Applications |
|
GMNA GM7000M |
Plastic Parts |
|
GMNA GM7001M |
Plastic Molding Compounds |
|
GMNA GM7400M |
Plastics Parts |
|
GMNA GM7451M |
Interior Part Performance Requirements for Simple, Molded in Color Plastic Components |
|
GMNA GM7452M |
Performance Requirements for Exterior Plastic Parts |
|
GMNA GM7454M |
Soft Interior Trim Parts |
|
GMNA GM7455M |
Decorative Interior Plastic Laminates and Films |
|
GMNA GM7461M |
Plastic Materials Used in Ash Tray Applications |
|
GMNA GM7466M |
Tool Finishing Tolerances for Class A Plastic Part Molds |
|
GMNA GM7467M |
Performance Requirements - Urethane Coated Ornamentation |
|
GMNA GM7469M |
Applied Graphics on Plastic Parts |
|
GMNA GM7472M |
GMP Specification - ISO 11469 Cross Reference |
|
GMNA GM7473M |
Coextruded Multi-Layer Plastic Fuel Tank |
|
GMNA GMN10061 |
Part Performance Requirements for Finishes of Electrical/Electronic Components |
|
GMNA GMN3901 |
Thermoplastic Elastomer Polyolefinic, Shore A65, Interior/Exterior, High Flow |
|
GMNA GMN3940 |
Polyurethane RRIM Sprayable Skin, Paintable, Interior |
|
GMNA GMN6995 |
Chrome Plated Plastic Parts Appearance |
|
GMNA GMP.ABS.001 |
ABS - General Purpose |
|
GMNA GMP.ABS.002 |
ABS - Ultraviolet Light Stabilized, Low Gloss |
|
GMNA GMP.ABS.003 |
ABS - Medium High Heat Resistant, Ultraviolet Light Stabilized |
|
GMNA GMP.ABS.004 |
ABS - Ultraviolet Light Stabilized, Low Gloss |
|
GMNA GMP.ABS.005 |
ABS - High Impact |
|
GMNA GMP.ABS.007 |
ABS - Chrome Platable Grade |
|
GMNA GMP.ABS.009 |
ABS - High Heat Resistant, Ultraviolet Light Stabilized, Injection Molding Grade, Pellet Form |
|
GMNA GMP.ABS.010 |
ABS - Medium Heat Resistant, UV Stabilized |
|
GMNA GMP.ABS.014 |
ABS - Heat Resistant |
|
GMNA GMP.ABS.016 |
ABS - High Impact, UV Stabilized |
|
GMNA GMP.ABS.017 |
ABS - UV Stabilized, General Purpose |
|
GMNA GMP.ABS.018R |
ABS - Recycled, General Purpose |
|
GMNA GMP.ABS.025 |
ABS Blow Molding Grade |
|
GMNA GMP.ABS+PC.002 |
ABS+PC, Heat Stable, Injection Molded, Low UV Stable |
|
GMNA GMP.ABS+PC.003 |
ABS + Polycarbonate - Alloy |
|
GMNA GMP.ABS+PC.006 |
ABS + PC - 10% Glass Filled, Blend |
|
GMNA GMP.ABS+PC.007 |
ABS + PC - 15% Glass Filled Blend |
|
GMNA GMP.ABS+PC.008 |
ABS + PC - High Heat, High Impact Blend |
|
GMNA GMP.ABS+PC.009 |
ABS + Polycarbonate - High Impact Blend |
|
GMNA GMP.ABS+PC.010 |
ABS + PC - High Impact, Heat Stabilized, Exterior Grade |
|
GMNA GMP.ABS+PC.011 |
ABS + Polycarbonate - Heat Resistant, Black |
|
GMNA GMP.ABS+PC.012 |
ABS+PC, Heat Stable, Injection Molded, Chrome Plateable |
|
GMNA GMP.ABS+PC.013 |
ABS + PC - Blow Molding Grade |
|
GMNA GMP.ABS+PC.017 |
ABS+PC, UV Stable, Heat Stable, Injection Molded |
|
GMNA GMP.ABS+PC.019 |
ABS + PC - UV Stabilized, Impact Modified |
|
GMNA GMP.ABS+PC.021R |
ABS + PC - Recycled Heat Stabilized |
|
GMNA GMP.ASA.001 |
ASA - High Heat, Weatherable, Terpolymer-Replaced by GMP.ASA.002 |
|
GMNA GMP.ASA.002 |
ASA Terpolymer- Weather Resistant, Low Gloss, Injection Molded-Replaces GMP.ASA.001 |
|
GMNA GMP.ASA.004 |
ASA - Weather Resistant |
|
GMNA GMP.ASA+PC.001 |
ASA+PC - Weatherable, Injection Molding Grade |
|
GMNA GMP.ASA+PC.002 |
ASA+PC - General Purpose |
|
GMNA GMP.ASA+PC.004 |
ASA+PC - Weatherable, High Heat, High Impact, Injection Molding Grade |
|
GMNA GMP.E/MA+PA6.001 |
Ionomer/Nylon 6 Alloy - Weather Resistant, 10% Glass Fiber Reinforced |
|
GMNA GMP.E/P.001 |
Thermoplastic Elastomer Polyolefinic, Shore A55, Underhood and Interior Applications |
|
GMNA GMP.E/P.002 |
Thermoplastic Elastomer - Polyolefinic, Shore A64, Underhood Applications |
|
GMNA GMP.E/P.003 |
Thermoplastic Elastomer - Polyolefinic, Shore A73, Underhood Applications |
|
GMNA GMP.E/P.004 |
Thermoplastic Elastomer - Polyolefinic, Shore A80, Underhood Applications |
|
GMNA GMP.E/P.005 |
Thermoplastic Elastomer - Polyolefinic, Shore A87, Underhood Applications |
|
GMNA GMP.E/P.007 |
Thermoplastic Elastomer - Polyolefinic, Shore D50, Underhood Applications |
|
GMNA GMP.E/P.016 |
Thermoplastic Elastomer - Polyolefinic, Shore D50, Interior/Exterior, Integrally Colored |
|
GMNA GMP.E/P.020 |
Polyolefin Alloy - 15% Mineral Filled, 1200 MPa Flexural Modulus |
|
GMNA GMP.E/P.022 |
Polyolefin Alloy - 275 MPa Flexural Modulus, Injection Molding Grade, Black |
|
GMNA GMP.E/P.023 |
Polyolefin Alloy - 550 MPa Flexural Modulus |
|
GMNA GMP.E/P.025 |
Polyolefin Alloy - Weather Resistant, 700 MPa Flexural Modulus |
|
GMNA GMP.E/P.028 |
Polyolefin Alloy Weather Resistant, 550 MPa Flexural Modulus |
|
GMNA GMP.E/P.029 |
Thermoplastic Elastomer Polyolefinic, Shore A67, Interior/Exterior |
|
GMNA GMP.E/P.033 |
Thermoplastic Elastomer - Polyolefinic, Shore D40 |
|
GMNA GMP.E/P.037 |
Thermoplastic Elastomer Polyolefinic, Shore A87, Interior/Exterior |
|
GMNA GMP.E/P.039 |
Polyolefin Alloy 700 MPa Flexural Modulus |
|
GMNA GMP.E/P.044 |
Thermoplastic Elastomer - Polyolefinic, Shore A73, Interior, Integrally Colored |
|
GMNA GMP.E/P.050 |
Polyolefin Alloy - Weather Resistant, 15% Mineral Filled, 1200 MPa Flexural Modulus |
|
GMNA GMP.E/P.057 |
Thermoplastic Elastomer Polyolefinic, Shore A73, Interior/Exterior |
|
GMNA GMP.E/P.059 |
Polyolefin Alloy - 320 MPa Flexural Modulus |
|
GMNA GMP.E/P.062 |
Polyolefin Alloy - 15% Mineral Filled, 550 MPa Flexural Modulus, Low CLTE |
|
GMNA GMP.E/P.063 |
Polyolefin Alloy - 25% Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE |
|
GMNA GMP.E/P.065 |
Thermoplastic Elastomer - Polyolefinic, Shore A47, HVAC Applications |
|
GMNA GMP.E/P.067 |
Thermoplastic Elastomer - Polyolefinic, Shore A87, Interior, Integrally Colored |
|
GMNA GMP.E/P.068 |
Polyefin Alloy - Weatherable, 25% Glass and Mineral Filled, 1200 MPa Flexural Modulus, Low CLTE |
|
GMNA GMP.E/P.070 |
Polyolefin Alloy - 20% Mineral Filled, UV Stable |
|
GMNA GMP.E/P.071 |
Thermoplastic Elastomer - Polyolefinic, Shore A55, Interior, Integrally Colored |
|
GMNA GMP.E/P.074 |
Polyolefin Alloy - 800 MPa Flexural Modulus |
|
GMNA GMP.E/P.076 |
Polyolefin Alloy - Weather Resistant, 20% Mineral Filled, 1950 MPa Flexural Modulus |
|
GMNA GMP.E/P.078 |
Thermoplastic Elastomer Polyolefinic, Shore A50, Interior/Exterior and Underhood Applications |
|
GMNA GMP.E/P.082 |
Thermoplastic Elastomer Polyolefinic, Shore A62, Interior/Exterior |
|
GMNA GMP.E/P.087 |
Polyolefin Alloy Weather Resistant, 275 MPa Flexural Modulus, Injection Molding Grade |
|
GMNA GMP.E/P.088 |
Polyolefin Alloy Weather Resistant, Thermoformable/Blow- Moldable, 1800 MPa Flexural Modulus |
|
GMNA GMP.E/P.089 |
Polyolefin Alloy 20% Mineral Filled, 1950 MPa Flexural Modulus |
|
GMNA GMP.E/P.099 |
Polyolefin Alloy 900 MPa Flexural Modulus, High Flow |
|
GMNA GMP.E/P.106 |
Polyolefin Alloy Weather Resistant, 900 MPa Flexural Modulus, High Flow-Shown on GMN7301 |
|
GMNA GMP.E/P.107 |
Polyolefin Alloy UV Stabilized, 10% Mineral Filler, 1400 Flexural Modulus, Injection Molded |
|
GMNA GMP.E/P.113 |
Polyolefin Alloy UV Stabilized, 700 MPa Flexural Modulus, Low Temperature Impact, Injection Molded |
|
GMNA GMP.E/P.115 |
Thermoplastic Elastomer - Polyolefin Alloy, Shore A60, Interior, Integrally Colored |
|
GMNA GMP.E/P.117 |
Thermoplastic Elastomer - Polyolefin Alloy, Shore A70, Interior, Integrally Colored |
|
GMNA GMP.E/P.118 |
Thermoplastic Elastomer - Polyolefin Alloy, Shore A75, Interior, Integrally Colored |
|
GMNA GMP.E/P.119 |
Polyolefin Alloy UV Stabilized, 20% Mineral Filler, Scratch Resistant, Injection Molded |
|
GMNA GMP.E/P.120 |
Thermoplastic Elastomer Polyolefinic, Shore A80, Interior/Exterior, Integrally Colored |
|
GMNA GMP.E/P.121 |
Polyolefin Alloy 1300 MPa Flexural Modulus, 20% Mineral Filled, High Flow |
|
GMNA GMP.E/P.126 |
Thermoplastic Elastomer - Polyolefin Alloy, Shore A79, Interior/Exterior, EPDM Bondable |
|
GMNA GMP.E/P.133 |
Polyolefin Alloy 1000 MPa Flexural Modulus, High Flow |
|
GMNA GMP.E/P.136 |
Thermoplastic Elastomer - Polyolefin Alloy, Shore A67, Interior, Integrally Colored, Extrusion Grade |
|
GMNA GMP.E/P.137 |
Thermoplastic Elastomer - Polyolefinic, Shore A47, Interior/Exterior, and Underhood Applications, High Flow |
|
GMNA GMP.E/P.148 |
Polyolefin Alloy 1950 MPa Flexural Modulus, Extrusion/Thermoforming Grade for Paint Film Applications |
|
GMNA GMP.EEBC.003 |
Thermoplastic Polyester Elastomer - 73 Type D Hardness, 560 MPa Flexural Modulus |
|
GMNA GMP.EEBC.007 |
Thermoplastic Polyester Elastomer - 62 Type D Hardness, 300 MPa Flexural Modulus |
|
GMNA GMP.EEBC.008 |
Thermoplastic Polyester Elastomer - 55 Type D Hardness, 200 MPa Flexural Modulus |
|
GMNA GMP.PA12.002 |
Nylon 12 - 23% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA12.003 |
Nylon 12 13 % Plasticized, Heat Stabilize |
|
GMNA GMP.PA46.003 |
Nylon 46 - 30% Glass Filled Reinforced, Heat Stabilized |
|
GMNA GMP.PA6.001 |
Nylon 6 - 40% Glass Fiber Reinforced/Mineral Filled, UV Stabilized, Heat Stabilized |
|
GMNA GMP.PA6.002 |
Nylon 6 - UV Stabilized, Heat Stabilized, Impact Modified |
|
GMNA GMP.PA6.003 |
Nylon 6 - Copolymer, Heat Stabilized |
|
GMNA GMP.PA6.004 |
Nylon 6 - 25% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA6.005 |
Nylon 6 Copolymer, Heat Stabilized, Impact Modified |
|
GMNA GMP.PA6.006 |
Nylon 6 - 13% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA6.008 |
Nylon 6 - General Purpose, Heat Stabilized |
|
GMNA GMP.PA6.009 |
Nylon 6 - 33% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA6.010 |
Nylon 6 - 33% Glass Fiber Reinforced, Exterior Weatherable, Heat Stabilized |
|
GMNA GMP.PA6.011 |
Nylon 6 - 40% Mineral Filled, Heat Stabilized |
|
GMNA GMP.PA6.012 |
Nylon 6 - 15% Glass Fiber Reinforced/25% Mineral Filled, Heat Stabilized |
|
GMNA GMP.PA6.013 |
Nylon 6 - 40% Glass Fiber Reinforced/Mineral Filled, Weatherable, Heat Stabilized |
|
GMNA GMP.PA6.015 |
Nylon 6 - 45% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA6.016 |
Nylon 6 - Copolymer, Heat Stabilized, High Impact |
|
GMNA GMP.PA6.018 |
Nylon 6 - 13% Glass Fiber Reinforced, Heat Stabilized, UV Light Resistant |
|
GMNA GMP.PA6.026 |
Nylon 6 - 30% Glass Fiber Reinforced, UV Stabilized, Impact Modified, Heat Stabilized, Reduced Moisture |
|
GMNA GMP.PA6.029 |
Nylon 6 - 15% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA6.033 |
Nylon 6 - General Purpose |
|
GMNA GMP.PA6.034 |
Nylon 6 - 33% Glass Fiber Reinforced, Heat Stabilized, High Impact |
|
GMNA GMP.PA6.039 |
Nylon 6 - 12% Glass Fiber Reinforced, Blow Molding Grade |
|
GMNA GMP.PA6.044 |
Nylon 6 - UV Resistant, Heat Stabilized |
|
GMNA GMP.PA6.045 |
Nylon 6 - 33% Glass Fiber Reinforced, UV Stabilized, Heat Stabilized |
|
GMNA GMP.PA6.054 |
Nylon 6 - 30% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA66.002 |
Nylon 66 - 14% Glass and Rubber Filled, Heat Stabilized |
|
GMNA GMP.PA66.003 |
Nylon 66 - 38% Glass Fiber Reinforced/Mineral Filled, Heat Stabilized |
|
GMNA GMP.PA66.005 |
Nylon 66 - General Purpose |
|
GMNA GMP.PA66.006 |
Nylon 66 - Impact Modified, Amorphous, Alloy |
|
GMNA GMP.PA66.007 |
Nylon 66 - 40% Mineral Filled, Heat Stabilized |
|
GMNA GMP.PA66.008 |
Nylon 66 - 20% PTFE Filled, Heat Stabilized |
|
GMNA GMP.PA66.009 |
Nylon 66 - Impact Modified, Heat Stabilized |
|
GMNA GMP.PA66.010 |
Nylon 66 - 50% Long Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA66.013 |
Nylon 66 - 33% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA66.014 |
Nylon 66 - UV Stabilized, Heat Stabilized |
|
GMNA GMP.PA66.015 |
Nylon 66 - High Impact Modified, Heat Stabilized |
|
GMNA GMP.PA66.016 |
Nylon 66 - 33% Glass Fiber Reinforced, High Impact Modified, Heat Stabilized |
|
GMNA GMP.PA66.018 |
Nylon 66 - Heat Stabilized |
|
GMNA GMP.PA66.020 |
Nylon 66 - 13% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA66.021 |
Nylon 66 - Very High Impact Modified |
|
GMNA GMP.PA66.025 |
Nylon 66 - 43% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA66.034 |
Nylon 66 - 32% Glass Fiber Reinforced, Heat Stabilized, MoS2 Lubricated |
|
GMNA GMP.PA66.039R |
Nylon 66 - Recycled, 40% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA66.040 |
Nylon 66 - 30% Glass Fiber Reinforced, Heat Stabilized |
|
GMNA GMP.PA66.054 |
Nylon 66 - 33% Glass Fiber Reinforced, Heat Stabilized, Hydrolysis Resistant |
|
GMNA GMP.PA66.057 |
Nylon 66 - 13% Glass Fiber Reinforced, Impact Modified, Heat Stabilized |
|
GMNA GMP.PA66.060 |
Nylon 66 - 40% Fibrous Mineral Reinforced |
|
GMNA GMP.PA66.062 |
Nylon 66 - Very High Impact Modified, Heat Stabilized |
|
GMNA GMP.PA66.063 |
Nylon 66 - Impact Modified |
|
GMNA GMP.PA66.064 |
Nylon 66 - Impact Modified |
|
GMNA GMP.PA66.065 |
Nylon 66 - 33% Glass Fiber Reinforced |
|
GMNA GMP.PA66.074 |
Nylon 66 - Weather Resistant, Impact Modified, Black |
|
GMNA GMP.PA66.076 |
Nylon 66 - Ultraviolet Light Resistant, 13% Glass Reinforced |
|
GMNA GMP.PA66.079 |
Nylon 66 - UV Stabilized, High Impact Modified, Heat Stabilized |
|
GMNA GMP.PA66.082 |
Nylon 66 - Aramid Fiber Reinforced, Teflon Filled, Heat Stabilized |
|
GMNA GMP.PA66/6.002 |
Nylon 66/6 - 33% Glass Fiber Reinforced, Copolymer, Heat Stablized, Lubricated |
|
GMNA GMP.PA66/6.004 |
Nylon 66/6 - 33% Glass Fiber Reinforced, UV Stabilized, Heat Stabilized |
|
GMNA GMP.PA66+ PPE.003 |
Nylon 66 + PPE - General Purpose, Alloy |
|
GMNA GMP.PBT.001 |
PBT - General Purpose |
|
GMNA GMP.PBT.006 |
PBT - 15% Glass Fiber Reinforced |
|
GMNA GMP.PBT.009 |
PBT - 30% Glass Fiber Reinforced, Polycarbonate Modified |
|
GMNA GMP.PBT.010 |
PBT - 30% Glass Fiber Reinforced |
|
GMNA GMP.PBT+ASA.001 |
PBT+ASA - 20% Glass Fiber Reinforced |
|
GMNA GMP.PBT+PET.001 |
PBT+PET - 30% Glass Fiber Reinforced/Mineral Filled, Weatherable |
|
GMNA GMP.PBTP.001 |
PBTP - General Purpose-Replaced By GMP.PBT.001 |
|
GMNA GMP.PBTP.009 |
PBTP - 30% Glass Fiber Reinforced, Polycarbonate Modified-Replaced by GMP.PBT.009 |
|
GMNA GMP.PBTP.010 |
PBTP - 30% Glass Fiber Reinforced-Replaced By GMP.PBT.010 |
|
GMNA GMP.PC.001 |
Polycarbonate General Purpose, ISO Specifications |
|
GMNA GMP.PC.003 |
Polycarbonate - High Heat, Impact Modified |
|
GMNA GMP.PC.004 |
Polycarbonate - Medium Heat, Impact Modified |
|
GMNA GMP.PC.007 |
Polycarbonate - Weather Resistant, Integral Color, Medium Viscosity |
|
GMNA GMP.PC.008 |
Polycarbonate - UV Stabilized, Injection Molding Grade |
|
GMNA GMP.PC.009 |
Polycarbonate - Exterior Lens |
|
GMNA GMP.PC.011 |
Polycarbonate - High Viscosity |
|
GMNA GMP.PC.014 |
Polycarbonate - Low Viscosity, UV Resistant, Colorable |
|
GMNA GMP.PC.015 |
Polycarbonate - Low Viscosity, Colorable |
|
GMNA GMP.PC.016 |
Polycarbonate - High Heat, High Flow, Impact Modified |
|
GMNA GMP.PC.018R |
Polycarbonate General Purpose, Recycled, ISO Specifications |
|
GMNA GMP.PC.024 |
Polycarbonate High Heat, Copolymer, ISO Test Methods |
|
GMNA GMP.PC+PBT.006 |
PC + PBT, 11 % - GFR, EPDM Modified, Weatherable |
|
GMNA GMP.PC+PBTP.001 |
PC + PBTP - Impact Modified, Weatherable, Alloy |
|
GMNA GMP.PC+PBTP.008 |
PC + PBTP - Impact Modified, Alloy |
|
GMNA GMP.PE.003 |
Polyethylene - High Density, Extrusion Grade, Copolymer |
|
GMNA GMP.PE.004 |
Polyethylene - High Density, Copolymer, Blow Molding/Extrusion Grade, Pellet Form |
|
GMNA GMP.PE.007 |
Polyethylene - High Density, Copolymer, Sheet Extrusion/ Thermoforming, Pellet Form |
|
GMNA GMP.PE.008 |
Polyethylene - High Density, Copolymer, Injection Molding |
|
GMNA GMP.PE.014 |
Polyethylene - High Density, Stress Crack Resistant, Injection Molding Grade |
|
GMNA GMP.PE.015 |
Polyethylene - Linear Low Density, Low Gloss, Blow Molding Grade |
|
GMNA GMP.PE.017 |
Polyethylene 25% Filled, High Density, Sheet Extrudable, Blow Moldable, Homopolymer |
|
GMNA GMP.PE.050 |
Polyethylene - High Density, High Molecular Weight |
|
GMNA GMP.PE.056 |
Polyethylene Foam: Cross - Linked, Black |
|
GMNA GMP.PE.060 |
Polyethylene - High Density, Stress Crack Resistant, Blow Molding |
|
GMNA GMP.PE.062 |
Polyethylene - High Density, High Molecular Weight |
|
GMNA GMP.PE.064 |
Polyethylene Low Density, Extrusion Grade |
|
GMNA GMP.PETP.002 |
PETP - 30% Glass Fiber Reinforced |
|
GMNA GMP.PF.002 |
Phenolic - 20% Mineral Filled, Black |
|
GMNA GMP.PMMA.001 |
Acrylic - High Impact Modified, Weatherable |
|
GMNA GMP.PMMA.006 |
Acrylic - Exterior Lens |
|
GMNA GMP.PMMA.007 |
Acrylic - Exterior Lenses, High Molecular Weight |
|
GMNA GMP.PMMA.009 |
Acrylic - Exterior Trim |
|
GMNA GMP.PMMA.012 |
Acrylic - Weather Resistant, Heat Resistant |
|
GMNA GMP.PMMA.015 |
Acrylic - Medium Impact Modified, Weatherable |
|
GMNA GMP.POM.002 |
Acetal - Homopolymer, General Purpose |
|
GMNA GMP.POM.003 |
Acetal - Homopolymer, High Impact |
|
GMNA GMP.POM.005 |
Acetal - General Purpose, Copolymer |
|
GMNA GMP.POM.006 |
Acetal - 25% Short Glass Fiber Reinforced, Copolymer, Coupled |
|
GMNA GMP.POM.007 |
Acetal - Homopolymer, UV Light Resistant |
|
GMNA GMP.POM.008 |
Acetal - Copolymer, UV Stabilized, Integrally Colored |
|
GMNA GMP.POM.011 |
Acetal - Lubricated, 20% PTFE Filled |
|
GMNA GMP.POM.013 |
Acetal - Homopolymer, Internally Lubricated |
|
GMNA GMP.POM.017 |
Acetal - Homopolymer, UV Stabilized |
|
GMNA GMP.POM.021 |
Acetal - Copolymer, High Flow |
|
GMNA GMP.POM.024 |
Copolymer, Impact Modified |
|
GMNA GMP.POM.025 |
Acetal - Impact Modified, Copolymer |
|
GMNA GMP.PP.001 |
Polypropylene - General Purpose, Copolymer |
|
GMNA GMP.PP.002 |
Polypropylene - Heat Stabilized, UV Stabilized, Impact Modified |
|
GMNA GMP.PP.003 |
Polypropylene - 30% Glass Fiber Reinforced, Impact Modified, Chemically Coupled |
|
GMNA GMP.PP.004 |
Polypropylene - 20% Glass Filled, Impact Modified |
|
GMNA GMP.PP.006 |
Polypropylene - Medium Impact, Copolymer |
|
GMNA GMP.PP.007 |
Polypropylene - Weather Resistant, Black, Heat Stabilized, Copolymer |
|
GMNA GMP.PP.008 |
Polypropylene - 20% Talc Filled Homopolymer |
|
GMNA GMP.PP.009 |
Polypropylene - 30% Glass Fiber Reinforced, Chemically Coupled, Homopolymer |
|
GMNA GMP.PP.013 |
Polypropylene - Homopolymer, General Purpose, Injection Molding |
|
GMNA GMP.PP.014 |
Polypropylene - High Impact, Copolymer |
|
GMNA GMP.PP.016 |
Polypropylene Sheet - 40% Glass Fiber Reinforced |
|
GMNA GMP.PP.017 |
Polypropylene - 30% Glass Fiber Reinforced, Chemically Coupled, Heat Stabilized Homopolymer |
|
GMNA GMP.PP.018 |
Polypropylene - 25% Mica Filled, Chemically Coupled, Heat Stabilized, Copolymer |
|
GMNA GMP.PP.021 |
Polypropylene - Heat Stabilized, Impact Copolymer, Blow Molding Grade |
|
GMNA GMP.PP.026 |
Polypropylene - 25% Mineral Filled, UV Stabilized, Copolymer |
|
GMNA GMP.PP.027 |
Polypropylene - Copolymer, High Impact |
|
GMNA GMP.PP.028 |
Polypropylene - 12% Mica Filled, Chemically Coupled, Heat Stabilized, Copolymer |
|
GMNA GMP.PP.029 |
Polypropylene - 20% Glass Fiber Reinforced Chemically Coupled Copolymer |
|
GMNA GMP.PP.030 |
Polypropylene - 40% Talc Filled, Heat Stabilized, Impact Modified Polypropylene Homopolymer |
|
GMNA GMP.PP.031 |
Polypropylene - 12% Mica Filled, Heat Stabilized, Polypropylene Homopolymer |
|
GMNA GMP.PP.032 |
Polypropylene - 35% Glass/Mineral Reinforced, Heat Stabilized, Impact Modified Polypropylene Homopolymer |
|
GMNA GMP.PP.033 |
Polypropylene - Heat Resistant, High Crystalline, UV Stabilized, Copolymer |
|
GMNA GMP.PP.037 |
Polypropylene - Copolymer, UV Stabilized, High Impact, Injection Molding Grade |
|
GMNA GMP.PP.039 |
Polypropylene - 43% Glass Fiber Reinforced Chemically Coupled Polypropylene Copolymer |
|
GMNA GMP.PP.045 |
Polypropylene - 20% Talc Filled Impact Modified Copolymer |
|
GMNA GMP.PP.047 |
Polypropylene - 30% Long Glass Fiber Reinforced, Stampable Sheet |
|
GMNA GMP.PP.051 |
Polypropylene - 10% Glass Reinforced, Chemically Coupled Homopolymer |
|
GMNA GMP.PP.052 |
Polypropylene - Homopolymer, 13% Glass Fiber Reinforced |
|
GMNA GMP.PP.057 |
Polypropylene - 40% Mineral Filled and Glass Fiber Reinforced, Chemically Coupled |
|
GMNA GMP.PP.060 |
Polypropylene - Homopolymer, 32% Mineral/Glass Reinforced |
|
GMNA GMP.PP.063 |
Polypropylene - 15% TALC Filled, High Impact, UV Stable, Copolymer |
|
GMNA GMP.PP.067 |
Polypropylene - 13% Talc Filled, Heat Resistant, UV Stable Copolymer |
|
GMNA GMP.PP.068 |
Polypropylene Expanded Bead Foam |
|
GMNA GMP.PP.075 |
Polypropylene - 20% Glass Fiber Reinforced, Chemically Coupled, Homopolymer |
|
GMNA GMP.PP.080 |
Polypropylene - 40% Calcium Carbonate Filled, Extrusion Grade, Homopolymer |
|
GMNA GMP.PP.081R |
Polypropylene - Recycled, 20% TALC Filled Homopolymer |
|
GMNA GMP.PP.083 |
PP - 20% Glass Filled Homopolymer |
|
GMNA GMP.PP.085 |
Polypropylene (PP), 13% Glass Fiber Reinforced, UV Stabilized, Homopolymer, ISO Tests |
|
GMNA GMP.PP.086R |
Polypropylene - Recycled, Copolymer |
|
GMNA GMP.PP.090 |
Polypropylene (PP) 30% Glass Fiber Reinforced, Highly Chemically Coupled, Homopolymer, ASTM Tests |
|
GMNA GMP.PP.092 |
Polypropylene - Expanded Bead Foam, Density Range 91 - 215 kg/m3 |
|
GMNA GMP.PP.094 |
Polypropylene (PP), 20% Talc Filled, UV Stabilized, Copolymer, ISO Tests |
|
GMNA GMP.PP.096 |
Polypropylene - High Heat, High Crystalline, UV Stabilized Copolymer |
|
GMNA GMP.PP.099 |
Polypropylene (PP) 20 % Glass Fiber Reinforced, UV Stabilized, Chemically Coupled, Homopolymer ISO Tests |
|
GMNA GMP.PP.104 |
Polypropylene - 30% Glass Reinforced, UV Stabilized, Blow Molding Grade Copolymer |
|
GMNA GMP.PP.106 |
Polypropylene (PP) 20% Talc Filled, Heat Stabilized, Impact Modified, Blow Molding Grade Copolymer, ISO Tests |
|
GMNA GMP.PP.107 |
Polypropylene High Impact Copolymer, UV Stable, ISO Tests |
|
GMNA GMP.PP.112 |
40% Long Glass Fiber Reinforced, Heat Stabilized Polypropylene (PP) Homopolymer, ISO Tests |
|
GMNA GMP.PP.114 |
Polypropylene - Heat Stabilized, Homopolymer, ISO Tests |
|
GMNA GMP.PP.118 |
Polypropylene 45 % Glass Fiber Reinforced, Heat Stabilized, Chemically Coupled Homopolymer, ISO Tests |
|
GMNA GMP.PP.122 |
Polypropylene (PP) 13 % Mineral Filled, Blow Moldable, Copolymer, ISO Tests |
|
GMNA GMP.PP.123 |
Polypropylene Medium Impact Copolymer, ISO Tests |
|
GMNA GMP.PP.125R |
Polypropylene Medium Impact Copolymer ISO Tests - Recycled |
|
GMNA GMP.PPS.001 |
Poly(Phenylene Sulfide) - 40% Glass Fiber Reinforced |
|
GMNA GMP.PS.005 |
PS - Expandable, Flame Retardant (SE) |
|
GMNA GMP.PUR.001 |
Polyurethane ISRIM Integral Skin Foam |
|
GMNA GMP.PUR.025 |
Polyurethane IMR SRIM Foam - 19% Continuous Strand Fiberglass Mat, 950 MPa |
|
GMNA GMP.PUR.034 |
Polyurethane RRIM - 13% Calcium Silicate (9986021), 375 MPa Flexural Modulus |
|
GMNA GMP.PUR.051 |
Polyurethane ISRIM UV Stable, Integral Skin, Foam |
|
GMNA GMP.PVC.002 |
PVC - 37 Shore D, Weatherable, Integral Colored, Injection Molding Compound-Replaces GMP.PVC.014 |
|
GMNA GMP.PVC.003 |
PVC - 37 Shore D, Weatherable, Integral Colored, Extrusion Molding Compound-Replaces GMP.PVC.015 |
|
GMNA GMP.PVC.005 |
PVC - 85 Shore A, UV Stabilized, Integral Colored, Extrusion Molding Compound |
|
GMNA GMP.PVC.006 |
PVC - 55 Shore D, Weatherable, Integral Colored, Extrusion Molding Compound |
|
GMNA GMP.PVC.007 |
PVC - 80 Shore A, Weatherable, Integral Colored, Extrusion Molding Compound-Replaces GMP.PVC.010 |
|
GMNA GMP.PVC.009 |
PVC - 80 Shore A, Weatherable, Integral Colored, Injection Molding Compound-Replaces GMP.PVC.012 |
|
GMNA GMP.PVC.010 |
PVC 85 Shore A, Weatherable, Integral Colored, Extrusion Molding Compound-Replaced by GMP.PVC.007 |
|
GMNA GMP.PVC.012 |
PVC 85 Shore A, Weatherable, Integral Colored, Injection Molding Compound-Replaced by GMP.PVC.009 |
|
GMNA GMP.PVC.013 |
PVC - 40 Shore D, Weatherable, Integral Colored, Extrusion Molding Compound-Replaced by GMP.PVC.003 |
|
GMNA GMP.PVC.023 |
PVC - 70 Shore A, UV Stabilized, Integral Colored, Injection Molding Compound |
|
GMNA GMP.PVC.033 |
PVC - 80 Shore D, Weatherable, Extrusion Compound |
|
GMNA GMP.PVC.034 |
PVC 78 Shore D, Weatherable, Integral Colored, Rigid Extrusion Molding Compound |
|
GMNA GMP.PVC.035 |
PVC 60 Shore A, Interior, Integral Colored, Extrusion/Injection Molding Compound |
|
GMNA GMP.PVC.038 |
PVC Liquid Castable, Flexible Skin, UV Stabilized |
|
GMNA GMP.PVC.042 |
PVC UV Stabilized, Heat Stabilized, Castable Powder |
|
GMNA GMP.PVC.049 |
PVC - 70 Shore A, Weatherable, 10% Mineral Filled, Extrusion Molding Compound |
|
GMNA GMP.PVC.060 |
PVC - 60 Shore A, Weatherable, Elastomeric |
|
GMNA GMP.PVC.061 |
PVC - 65 Shore A, Weatherable, Elastomeric |
|
GMNA GMP.PVC.065 |
PVC 65 Shore A, Weatherable, Integral Colored, Low Compression Set, Flexible Extrusion Compound |
|
GMNA GMP.PVC.075 |
PVC, 50 Shore D, Interior, Extrusion Molding Compound |
|
GMNA GMP.PVC.088 |
PVC 57 Shore A, 35% Compression Set, Weatherable, Integrally Colored, Extrusion Molding Compound |
|
GMNA GMP.S/MA.014 |
S/MA - Heat Resistant, 16% Glass Reinforced Copolymer |
|
GMNA GMP.TECEA.004 |
Thermoplastic Elastomer - Chlorinated Ethylene Alloy, Shore A68, Interior/Exterior |
|
GMNA GMP.TES.001 |
Thermoplastic Elastomer Styrene Block Copolymer, Shore A47, Interior |
|
GMNA GMP.TES.002 |
Thermoplastic Elastomer Styrene Block Copolymer, Shore A60, Interior |
|
GMNA GMP.TES.004 |
Thermoplastic Elastomer - Styrene Block Copolymer, Shore A73, Interior, UV Stabilized, Integrally Colored |
|
GMNA GMP.TES.013 |
Thermoplastic Elastomer Styrene Block Copolymer, Shore A60, Interior/Exterior |
|
GMNA GMP.TES.014 |
Thermoplastic Elastomer - Styrene Block Copolymer, Shore D34, 240 MPa Flexural Modulus, Interior, Integrally Colored |
|
GMNA GMP.TES.025 |
Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A80, Interior/Exterior, Integrally Colored |
|
GMNA GMP.TES.027 |
Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A70, Interior/Exterior, Integrally Colored |
|
GMNA GMP.TES.028 |
Thermoplastic Elastomer - Styrenic Block Copolymer, Shore A47, Exterior |
|
GMNA GMP.TPU.007 |
Thermoplastic Polyurethane Alloy 10% Glass Fiber Reinforced, 10% Mineral Filled, 1300 MPa Flexural Modulus |
|
GMNA GMP.TPU.028 |
TPU - UV Stabilized, Heat Stabilized, Castable Powder |
|
GMNA GMP.UP.003 |
Polyester SMC - Low Profile, 27.5% Glass Reinforced |
|
GMNA GMP.UP.004 |
Polyester SMC - Low Profile, 27.5% Glass Reinforced (Smooth) |
|
GMNA GMP.UP.014 |
Polyester BMC - Injection Molded, 11% Glass Reinforced |