|
FORD WSS-M99P1111- A |
STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS |
|
FORD WSS-M99P9999- L |
2002 RESTRICTED SUBSTANCE MANAGEMENT STANDARD - LETTER TO SUPPLIERS |
|
JAGUAR JNS 30.01.02 |
Atmospheric Ageing of Elastomeric Materials |
|
JAGUAR JNS 30.02.01 |
Determination of Total Aromatically Combined Carbon Content in Mineral Oils and Mineral Oil Based Materials |
|
JAGUAR JNS 30.03.01 |
Test Method for Break Clean Properties |
|
JAGUAR JNS 30.03.02 |
Test Method for Assessing Adhesion of Paint Films to Substrates: Cross-Hatch |
|
JAGUAR JNS 30.03.03 |
Bond Strength of Laminates |
|
JAGUAR JNS 30.03.04 |
Joint Strength of Extruded Rubber Seals |
|
JAGUAR JNS 30.03.05 |
Materials Tests Peel Strength |
|
JAGUAR JNS 30.03.06 |
Cleavage Strength of Adhesive Systems |
|
JAGUAR JNS 30.03.07 |
Adhesion of Back Coating to Base Material of Carpets |
|
JAGUAR JNS 30.03.08 |
Assessment of Non-blocking Characteristics of Vibration Damping Pads and Similar Materials |
|
JAGUAR JNS 30.03.09 |
Materials Tests Shear Adhesion |
|
JAGUAR JNS 30.03.10 |
Material Tests T-Peel Adhesion |
|
JAGUAR JNS 30.03.11 |
Adhesion of Colour Coat Films to Leather -Cross-Hatch Method |
|
JAGUAR JNS 30.03.12 |
Determination of Optimum Tack Strength and Open Joint Time of Solvent Based Adhesives |
|
JAGUAR JNS 30.03.13 |
Determination of the Peel Bond Strength of Solvent Based Adhesives |
|
JAGUAR JNS 30.03.14 |
Shear Adhesion |
|
JAGUAR JNS 30.03.15 |
Determination of Static Shear Strength |
|
JAGUAR JNS 30.03.16 |
Determination of Static Shear Strength at Elevated Temperatures |
|
JAGUAR JNS 30.03.17 |
Test Method for Rubber to Metal Bond Strength |
|
JAGUAR JNS 30.03.18 |
Weld Strength of Trim Materials |
|
JAGUAR JNS 30.03.19 |
Determination of Chip Resistance (Falling Nuts) |
|
JAGUAR JNS 30.03.20 |
Determination of Coating Adhesion on Coated Fabrics |
|
JAGUAR JNS 30.03.22 |
Assessment of Displacement of Adhesive /Sealer Materials Through Electrocoat Paint Systems |
|
JAGUAR JNS 30.03.23 |
Assessment of Resistance of Adhesive/Sealer Materials to Adhesion Loss and Under-Cut Corrosion |
|
JAGUAR JNS 30.03.24 |
Assessment of Adhesive/Sealer Materials for Wash-Off in Pretreatment Ops. |
|
JAGUAR JNS 30.03.25 |
Flock Adhesion |
|
JAGUAR JNS 30.03.26 |
Method for Evaluating the Paintable Characteristics of Automotive Sealers |
|
JAGUAR JNS 30.03.27 |
Determination of the Compatibility of Pressing Lubricants to Adhesive Bonding |
|
JAGUAR JNS 30.03.28 |
Test Method for Assessing Snatch Strength of Pressure Sensitive Adhesive Tapes |
|
JAGUAR JNS 30.03.29 |
Determination of Push-Off Load for Body Sealing Plugs |
|
JAGUAR JNS 30.03.30 |
Adhesion Characteristics of Polyurethane Adhesive |
|
JAGUAR JNS 30.03.31 |
Adhesion Potential Class 1 Door Window Seals |
|
JAGUAR JNS 30.03.32 |
Determination of Door Seal Pull-Out Load |
|
JAGUAR JNS 30.03.33 |
Adhesive Strength of Screen Mounted Mirror Retaining Plates |
|
JAGUAR JNS 30.03.34 |
Adhesion Test of a Plated Layer by Thermal Shock |
|
JAGUAR JNS 30.03.35 |
Cataplasma Test Method for Glazing Adhesives of Vehicles |
|
JAGUAR JNS 30.04.01 |
Abrasion Resistance of Elastomeric Materials |
|
JAGUAR JNS 30.04.02 |
Abrasion Resistance of Textile Fabrics |
|
JAGUAR JNS 30.04.03 |
Assessment of Retention of Hairs by Fabrics when in Contact with Natural Furs (Minking) |
|
JAGUAR JNS 30.04.04 |
Abrasion Resistance of Chemical Surface Coatings on Steel Screws |
|
JAGUAR JNS 30.04.05 |
Abrasion Resistance of Non-Metallic Materials, Taber Method |
|
JAGUAR JNS 30.04.06 |
Abrasion Resistance |
|
JAGUAR JNS 30.04.07 |
Abrasion Resistance of Flock Sprayed Components |
|
JAGUAR JNS 30.04.08 |
Abrasion Resistance of Decorative Finishes RCA Taber Method |
|
JAGUAR JNS 30.04.09 |
Abrasion Resistance of Printed Graphics |
|
JAGUAR JNS 30.04.10 |
Test for Mar Resistance |
|
JAGUAR JNS 30.04.11 |
Flock Resistance Test |
|
JAGUAR JNS 30.05.01 |
Bearding of Loop-Pile Carpets |
|
JAGUAR JNS 30.06.01 |
Blocking Characteristics of Leather and PVC |
|
JAGUAR JNS 30.07.01 |
Determination of the Equilibrium Reflux Boiling Point of Brake Fluids |
|
JAGUAR JNS 30.08.01 |
Test for Working Pressure Resistance |
|
JAGUAR JNS 30.08.02 |
Hydrostatic Test for Metal Tubing |
|
JAGUAR JNS 30.08.03 |
Burst Strength of Trim Boards |
|
JAGUAR JNS 30.08.04 |
Tests for Hose Expansion and Burst Pressure |
|
JAGUAR JNS 30.08.05 |
Burst Strength at Room Temperature |
|
JAGUAR JNS 30.08.06 |
Burst Test for Plastic Tubing |
|
JAGUAR JNS 30.09.01 |
Determination of Tack-Free and Peel Cure Time |
|
JAGUAR JNS 30.09.02 |
Determination of the Strength of Anti-freeze Solution by Refractive Index (Glycol Content of Engine Coolant) |
|
JAGUAR JNS 30.09.03 |
Determination of Refrigerant Extractable Material (Air Conditioning Hose) |
|
JAGUAR JNS 30.09.04 |
Determination of Zinc Contamination in Manganese Phosphate Type Conversion Coatings |
|
JAGUAR JNS 30.09.05 |
Determination of the Peroxide Number of Fuel |
|
JAGUAR JNS 30.09.06 |
Decarburisation Measurement |
|
JAGUAR JNS 30.09.07 |
Determination of Inclusions Content of Wrought Steels |
|
JAGUAR JNS 30.09.08 |
Determination of Coating Weight and/or Total Chromium Content of Zinc/Chromate/Organic Coatings |
|
JAGUAR JNS 30.09.09 |
Determination of Leachable Chromium from Dacromet Coatings |
|
JAGUAR JNS 30.09.10 |
Qualitive Assessment of Curing Applied to Dacromet Coatings |
|
JAGUAR JNS 30.09.11 |
Determination of Fuel Extractable Material |
|
JAGUAR JNS 30.09.12 |
Determination of SiC Content in a Composite Cylinder Bore Plating Layer |
|
JAGUAR JNS 30.10.01 |
Test Method for Compression Stress-Strain |
|
JAGUAR JNS 30.11.01 |
Colour Fastness to Light (Under Glass Test) |
|
JAGUAR JNS 30.11.02 |
Materials Tests Colour Fastness to Light |
|
JAGUAR JNS 30.11.03 |
Test Method for Colour Fastness to Weathering |
|
JAGUAR JNS 30.11.04 |
Test Method for Discoloration of PVC |
|
JAGUAR JNS 30.11.05 |
Materials Tests Colour Fastness to Light & Humidity |
|
JAGUAR JNS 30.11.06 |
Colour Fastness to Wet and Dry Rubbing |
|
JAGUAR JNS 30.11.07 |
Colour Fastness to Wet and Dry Rubbing |
|
JAGUAR JNS 30.12.01 |
Colour Matching of Trim Materials/Interior Painted Components |
|
JAGUAR JNS 30.12.02 |
Colour Continuity Control Exterior Paint |
|
JAGUAR JNS 30.12.03 |
Colour Continuity Control Trim Material |
|
JAGUAR JNS 30.12.04 |
Instrumental Colour Difference Measurement of Interior Trim Materials |
|
JAGUAR JNS 30.12.05 |
Instrumental Colour Difference Measurement of Components Painted Body Colour |
|
JAGUAR JNS 30.13.01 |
Test Method for Conditioning of Gasket Materials |
|
JAGUAR JNS 30.13.02 |
Laboratory Conditioning Of Test Materials |
|
JAGUAR JNS 30.14.01 |
Material Tests Resistance to Fluids |
|
JAGUAR JNS 30.14.02 |
Spot Test Method for Resistance to Contaminants |
|
JAGUAR JNS 30.14.03 |
Materials Tests Resistance to Brake Fluid |
|
JAGUAR JNS 30.14.04 |
Fluid Resistance of Elastomeric Materials |
|
JAGUAR JNS 30.14.05 |
Change in Physical Properties of Elastomeric Seals in Brake Fluids |
|
JAGUAR JNS 30.14.06 |
Fuel Resistance Test for Vacuum Brake Hose |
|
JAGUAR JNS 30.14.07 |
Water Absorption of Flexible Cellular Rubbers |
|
JAGUAR JNS 30.14.08 |
Oil Resistance of Paint Applied to Elastomeric Materials |
|
JAGUAR JNS 30.14.09 |
Water Absorption Test for Hydraulic Brake Hoses |
|
JAGUAR JNS 30.14.10 |
Test Method for Fuel Resistance of Polyurethane Tubing |
|
JAGUAR JNS 30.14.11 |
Resistance to Fluid Ageing of Hose and Tube (External Surfaces) |
|
JAGUAR JNS 30.14.12 |
Test Method for Chemical Resistance |
|
JAGUAR JNS 30.14.13 |
Effect of Cleaning Fluids on Interior Trim Materials |
|
JAGUAR JNS 30.14.14 |
Resistance of Elastomeric Materials to Fuels Containing Peroxide |
|
JAGUAR JNS 30.14.15 |
Recirculating Fuel Test for Hose and Tube |
|
JAGUAR JNS 30.14.16 |
Water Absorption by Acoustic Materials |
|
JAGUAR JNS 30.14.17 |
Fluid Resistance of Acoustic Materials |
|
JAGUAR JNS 30.14.18 |
Resistance of Textile Fabrics to Wetting by Oily Substances |
|
JAGUAR JNS 30.14.19 |
Effectiveness of Water-repellent Finishes Applied to Textile Fabrics |
|
JAGUAR JNS 30.14.20 |
Test Method for Resistance to Perspiration |
|
JAGUAR JNS 30.14.21 |
Oil Resistance of Paint Films |
|
JAGUAR JNS 30.14.22 |
Water Resistance Test for Body Sealing Plugs |
|
JAGUAR JNS 30.14.23 |
Cleanability of Plastics Materials after Soiling |
|
JAGUAR JNS 30.14.24 |
Resistance to Fluids Dip/Dry Method |
|
JAGUAR JNS 30.14.25 |
Resistance of Underbody Blackout Materials to Overbody Protective Removal Solutions |
|
JAGUAR JNS 30.14.26 |
Swab Method to Test the Effect of Fluids on Materials and Finishes |
|
JAGUAR JNS 30.14.27 |
Effectiveness of Water-Repellent Finishes on Convertible Hood Fabrics |
|
JAGUAR JNS 30.14.28 |
Water Barrier Test for Drop-In Mats |
|
JAGUAR JNS 30.14.29 |
Soiling and Cleanability of Trim Materials |
|
JAGUAR JNS 30.14.30 |
Susceptibility of Trim Materials to Dye Ingress |
|
JAGUAR JNS 30.15.02 |
Compressibility and Recovery (Foam Filled Components) |
|
JAGUAR JNS 30.15.03 |
Test Method for Stress Relaxation |
|
JAGUAR JNS 30.15.04 |
Compressibility and Recovery (Polyurethane Mouldings) |
|
JAGUAR JNS 30.15.05 |
Deflection Under Load (Rotationally Moulded Components) |
|
JAGUAR JNS 30.15.06 |
Compressibility and Deformation Test for Rubber Hoses |
|
JAGUAR JNS 30.15.07 |
Load /Deflection of Flexible Cellular Materials |
|
JAGUAR JNS 30.15.08 |
Load /Deflection Test on Anti-flutter Metal to Metal Adhesive |
|
JAGUAR JNS 30.15.09 |
Compressibility and Recovery Test |
|
JAGUAR JNS 30.15.10 |
Determination of Compression Set |
|
JAGUAR JNS 30.15.11 |
Compression Set of Hollow Section Extruded Rubber Seals |
|
JAGUAR JNS 30.15.13 |
Compression Set of Elastomeric Materials |
|
JAGUAR JNS 30.16.01 |
Glassware Test Method for Evaluation of Corrosion Inhibition Properties of Gasoline Engine Lubricants |
|
JAGUAR JNS 30.16.02 |
Test Method for Brake Fluid Corrosion |
|
JAGUAR JNS 30.16.03 |
Test Method for the Resistance to Salt Fog |
|
JAGUAR JNS 30.16.04 |
Assessment of Effect of Damage to Organic Finished Item: X- Scribe Method |
|
JAGUAR JNS 30.16.05 |
Corrosive Tendencies of Silicone Sealants |
|
JAGUAR JNS 30.16.06 |
Test Method for Corrosive Tendencies |
|
JAGUAR JNS 30.16.07 |
Corrosion Test for Elastomeric Brake Components |
|
JAGUAR JNS 30.16.08 |
Test Method for Resistance to Humidity under Condensation Conditions |
|
JAGUAR JNS 30.16.09 |
Test Cycle for Resistance to Humidity/Salt Spray |
|
JAGUAR JNS 30.16.10 |
Determination of Stack Corrosion of Lubricants and Oils in Press Shop Applications |
|
JAGUAR JNS 30.16.11 |
Corrosion Tests for Stainless Steels |
|
JAGUAR JNS 30.16.12 |
Determination of Surface Chromium Depletion on Stainless Steel |
|
JAGUAR JNS 30.16.13 |
Resistance to Scab Corrosion |
|
JAGUAR JNS 30.16.14 |
Salt Droplet Test |
|
JAGUAR JNS 30.16.15 |
Prohesion Corrosion Testing |
|
JAGUAR JNS 30.17.01 |
Determination of Coating Weight on Coated Steel Sheet and Tube |
|
JAGUAR JNS 30.17.02 |
Coating Weight of Waxes |
|
JAGUAR JNS 30.17.03 |
Determination of Phosphate Coating Weight on Uncoated and Zinc Coated Steel Sheet |
|
JAGUAR JNS 30.17.04 |
Determination of Coating Weight of Temporary Protectives |
|
JAGUAR JNS 30.17.05 |
Determination of Lubricant Weight on Sheet Metal |
|
JAGUAR JNS 30.19.01 |
Measurement and Determination of Dimensions of Particular Debris |
|
JAGUAR JNS 30.20.01 |
Static Stiffness of Rubber Mountings |
|
JAGUAR JNS 30.20.02 |
Determination of Flexural Properties of Headliners and Similar Components |
|
JAGUAR JNS 30.20.03 |
Test Method for Deflection Temperature Under Load |
|
JAGUAR JNS 30.21.01 |
Test Method for Hoses and Tubing: Dimensional Change in Fuel |
|
JAGUAR JNS 30.21.02 |
Test Method for Pressure Test: Change in Length |
|
JAGUAR JNS 30.21.03 |
Dimensionable Stability |
|
JAGUAR JNS 30.21.04 |
Dimensional Stability of Plastic Sheet after Vacuum Forming (Post Mould Shrinkage) |
|
JAGUAR JNS 30.21.05 |
Test Method for Dimensional Stability of Elastomeric Materials |
|
JAGUAR JNS 30.21.06 |
Dimensional Stability of PVC Coated Fabrics Under Humidity and Dry Heat |
|
JAGUAR JNS 30.21.07 |
Dimensional Stability of Carpets Under Humidity and Dry Heat |
|
JAGUAR JNS 30.21.08 |
Test Method for Environmental Effect on Components |
|
JAGUAR JNS 30.21.09 |
Test Method for Dimensional Stability |
|
JAGUAR JNS 30.22.01 |
Test Method for Tubing End Fitting Compatibility |
|
JAGUAR JNS 30.23.01 |
Test Method for Resistance to Dust Ingress |
|
JAGUAR JNS 30.23.02 |
Accelerated Climatic Testing of Plastics and Other Non-metallic Components |
|
JAGUAR JNS 30.23.03 |
Surface Temperature Test for Rear Parcel Trays |
|
JAGUAR JNS 30.23.04 |
Accelerated Humidity Test for Rear Parcel Trays |
|
JAGUAR JNS 30.23.05 |
Surface Temperature Test for Interior Components |
|
JAGUAR JNS 30.23.06 |
Thermal Cycling for Non-Metallic Components |
|
JAGUAR JNS 30.23.07 |
Accelerated Climatic Testing of Interior Wood Veneer Components |
|
JAGUAR JNS 30.24.01 |
Determination of pH of Electrophoretic Paints |
|
JAGUAR JNS 30.24.02 |
Determination of the Conductivity of Electrophoretic Paints |
|
JAGUAR JNS 30.25.01 |
Fitting of Hoses |
|
JAGUAR JNS 30.25.02 |
End Fitting Pull-off Load of Rubber Hose Assemblies |
|
JAGUAR JNS 30.25.03 |
Test Method for Tubing End Fitting Tightness |
|
JAGUAR JNS 30.26.01 |
Materials Tests Extrudability |
|
JAGUAR JNS 30.26.02 |
Materials Tests Assessment of Flow Characteristics |
|
JAGUAR JNS 30.26.03 |
Materials Tests Slump and Vertical Flow (Sagging) |
|
JAGUAR JNS 30.26.04 |
Flow Properties of Adhesives /Sealants |
|
JAGUAR JNS 30.26.05 |
Determination of Capillary Creep |
|
JAGUAR JNS 30.26.06 |
Determination of Viscosity |
|
JAGUAR JNS 30.26.07 |
Method for Assessing Thermal Reflow of Box-section Waxes |
|
JAGUAR JNS 30.28.01 |
Static Screw Locking Test for Non Pre-stressed Microencapsulated Threaded Assemblies |
|
JAGUAR JNS 30.28.02 |
Static Screw Locking Test for Pre-stressed Microencapsulated Threaded Assemblies |
|
JAGUAR JNS 30.28.04 |
Test Method for Surface Drag |
|
JAGUAR JNS 30.28.06 |
Insertion Force Class 1 Door Window Seals |
|
JAGUAR JNS 30.28.07 |
Sliding Force (Stiction) Class 1 Door Window Seals |
|
JAGUAR JNS 30.28.08 |
Static Screw Locking Test for Prevailing Torque Screws Nylon/Polyester Patch Type |
|
JAGUAR JNS 30.29.01 |
Test Method for Brake Fluid for Boiling Point Change |
|
JAGUAR JNS 30.30.01 |
Windscreen Fogging Characteristics of Organic Materials |
|
JAGUAR JNS 30.31.01 |
Test Method for Grain Retention |
|
JAGUAR JNS 30.32.01 |
Test Method for Resistance to Ageing |
|
JAGUAR JNS 30.32.02 |
Heat Ageing of Air Conveyance Hoses |
|
JAGUAR JNS 30.32.03 |
Heat Ageing Test for Flexible Cellular Materials |
|
JAGUAR JNS 30.32.04 |
Resistance to Heat Ageing -General |
|
JAGUAR JNS 30.32.05 |
Heat Stability of Accoustic Materials |
|
JAGUAR JNS 30.32.06 |
Heat Ageing of Polymer Coated Metal Tubing |
|
JAGUAR JNS 30.32.07 |
Resistance to Heat Ageing Hose and Tubing |
|
JAGUAR JNS 30.32.08 |
Overbake Effect on Metal /Metal Adhesives |
|
JAGUAR JNS 30.32.09 |
Heat Ageing Test for Tubing |
|
JAGUAR JNS 30.32.10 |
Test Method for Heat Ageing |
|
JAGUAR JNS 30.32.11 |
Heat Ageing Test for Rubber Hoses |
|
JAGUAR JNS 30.32.12 |
Test Method for Heat Ageing of Elastomeric Materials |
|
JAGUAR JNS 30.33.01 |
Heat Stability |
|
JAGUAR JNS 30.33.02 |
Determination of Expansion for Body Sealers |
|
JAGUAR JNS 30.34.01 |
Halide Content of Automotive Components |
|
JAGUAR JNS 30.35.01 |
Indentation Hardness and Recovery after Compression of Moulded Headliners and Similar Components |
|
JAGUAR JNS 30.35.02 |
Indentation Hardness of Moulded Seating Foams |
|
JAGUAR JNS 30.35.03 |
Indentation Hardness of Semi-rigid Foam |
|
JAGUAR JNS 30.35.04 |
Materials Tests Pencil Hardness of Paint Films |
|
JAGUAR JNS 30.35.05 |
Determination of Rockwell Hardness |
|
JAGUAR JNS 30.35.06 |
Hardness of Elastomeric Materials |
|
JAGUAR JNS 30.35.07 |
Indentation Hardness of Moulded Foam Components |
|
JAGUAR JNS 30.35.08 |
Vickers Hardness Test |
|
JAGUAR JNS 30.35.09 |
Mar Testing of Exterior Paint Finishes Laboratory Car Wash Simulation |
|
JAGUAR JNS 30.36.01 |
Internal Cleanliness of Metal Tubing |
|
JAGUAR JNS 30.37.01 |
Determination of Interfacial Tension of Mineral Oil Against Water by the Ring Method |
|
JAGUAR JNS 30.38.01 |
Low Temperature Impact Testing of Acoustic Materials |
|
JAGUAR JNS 30.38.02 |
Impact Test for Tubing |
|
JAGUAR JNS 30.39.01 |
Test Method for Low Temperature Flexibility |
|
JAGUAR JNS 30.39.02 |
Low Temperature Flexibility of Air Conveyance Hose |
|
JAGUAR JNS 30.39.03 |
Low Temperature Impact of Air Conveyance Hose |
|
JAGUAR JNS 30.39.04 |
Low Temperature Flexibility of Flexible Sealing and Jointing Compounds |
|
JAGUAR JNS 30.39.05 |
Cold Slam Test |
|
JAGUAR JNS 30.39.06 |
Low Temperature Impact Testing of Polymer Coated Tubing |
|
JAGUAR JNS 30.39.07 |
Low Temperature Flexibility OF Trim Materials |
|
JAGUAR JNS 30.39.08 |
Low Flexibility Test for Tubing |
|
JAGUAR JNS 30.39.09 |
Low Temperature Fatigue Test for Tubing |
|
JAGUAR JNS 30.39.10 |
Determination of Stiffness of Vulcanised Rubbers at Low Temperature |
|
JAGUAR JNS 30.39.11 |
Test Method for Low Temperature Effect on Elastomeric Materials |
|
JAGUAR JNS 30.39.12 |
Resistance to Low Temperature (Impact Brittleness Temperature) |
|
JAGUAR JNS 30.39.13 |
Open Joint Cold Slam Test |
|
JAGUAR JNS 30.39.14 |
Low Temperature Flexibility of Elastomeric Materials |
|
JAGUAR JNS 30.40.01 |
Test Method for Brake Fluid Lubricity |
|
JAGUAR JNS 30.40.02 |
Determination of Pressing Lubricant Lubricity |
|
JAGUAR JNS 30.41.01 |
Moisture Content |
|
JAGUAR JNS 30.41.02 |
Determination of Total Solids Content |
|
JAGUAR JNS 30.41.03 |
Determination of Moisture Levels in Elastomeric and Thermoplastic Hoses |
|
JAGUAR JNS 30.41.04 |
Water Absorption of Trim Boards |
|
JAGUAR JNS 30.41.05 |
Determination of Paint Volume Solids |
|
JAGUAR JNS 30.42.01 |
Identification of Particulate Debris by Magnetic Separation and Microscopy |
|
JAGUAR JNS 30.43.01 |
Test Method for Melting Point |
|
JAGUAR JNS 30.44.01 |
Test Method for Mouldproofing Content |
|
JAGUAR JNS 30.44.02 |
Test Method for Sterility |
|
JAGUAR JNS 30.45.01 |
Test Method for Reinforcement Properties |
|
JAGUAR JNS 30.45.02 |
Conductivity of Zinc Foil Gasket Adhesive Backing |
|
JAGUAR JNS 30.45.03 |
Expansion Characteristics of Adhesive /Sealants |
|
JAGUAR JNS 30.45.04 |
Fabric Transparency |
|
JAGUAR JNS 30.45.05 |
Flammability of Interior Materials |
|
JAGUAR JNS 30.45.06 |
Determination of Pressing Lubricant Removeability from Sheet Metal |
|
JAGUAR JNS 30.45.07 |
Determination of the Compatibility of Pressing Lubricants to Welding |
|
JAGUAR JNS 30.45.08 |
Test for Weld Through Characteristics of Body-In-White Sealant Materials |
|
JAGUAR JNS 30.45.09 |
Fire Resistance of Fuel Hoses |
|
JAGUAR JNS 30.45.10 |
Determination of Viscosity of High Viscosity Materials |
|
JAGUAR JNS 30.45.11 |
Determination of Opaqueness of Black Obscuration Band on Windscreens |
|
JAGUAR JNS 30.45.12 |
Oil Filter Embrittlement Test |
|
JAGUAR JNS 30.45.13 |
Dewatering Time of Temporary Protectives |
|
JAGUAR JNS 30.46.01 |
Detection of Mineral Oil Contamination of Brake Fluid by Thin-layer Chromatography |
|
JAGUAR JNS 30.47.01 |
Odour and Mildew |
|
JAGUAR JNS 30.48.01 |
Ozone Resistance of Rubber Hose and Tubing |
|
JAGUAR JNS 30.48.02 |
Ozone Resistance of Flexible Cellular Rubbers |
|
JAGUAR JNS 30.48.03 |
Ozone Resistance of Plastic and Rubber Materials |
|
JAGUAR JNS 30.48.04 |
Ozone Resistance After Ageing and Flexing |
|
JAGUAR JNS 30.49.01 |
Pile Count of Carpet |
|
JAGUAR JNS 30.49.02 |
Pile Height of Carpet |
|
JAGUAR JNS 30.49.03 |
Free Pile Height Measurement of Flock Sprayed Components |
|
JAGUAR JNS 30.50.01 |
Plasticiser Migration (Tackiness) |
|
JAGUAR JNS 30.51.01 |
Water Permeability of Hydraulic Brake Hose |
|
JAGUAR JNS 30.51.02 |
Determination of Moisture Permeation Levels in Elastomeric and Thermoplastic Hoses |
|
JAGUAR JNS 30.51.03 |
Determination of Refrigerant Permeability in Air Conditioning Hoses |
|
JAGUAR JNS 30.51.04 |
Test Method for Fuel Permeability |
|
JAGUAR JNS 30.52.01 |
Test Method for Rebound Resilience |
|
JAGUAR JNS 30.53.01 |
Determination of Strain-Age-Embrittlement in As-Rolled and Welded Steel Tubing |
|
JAGUAR JNS 30.54.01 |
Test Method for Set Characteristics of Coiled Tubing |
|
JAGUAR JNS 30.55.01 |
Determination of Specular Gloss |
|
JAGUAR JNS 30.55.02 |
Surface Roughness Measurements of Cold Reduced Sheet Steel |
|
JAGUAR JNS 30.56.01 |
Density of Extrudable Non-Metallic Materials |
|
JAGUAR JNS 30.56.02 |
Determination of the Specific Gravity of Low Viscosity Liquids |
|
JAGUAR JNS 30.56.03 |
Determination of the Density of Trim Board |
|
JAGUAR JNS 30.56.04 |
Apparent Density of Flexible Cellular Materials |
|
JAGUAR JNS 30.56.05 |
Test Method for Specific Gravity |
|
JAGUAR JNS 30.56.06 |
Test Method for Density of Elastomeric Materials |
|
JAGUAR JNS 30.57.01 |
Determination of Stability at 100° C |
|
JAGUAR JNS 30.58.01 |
Test Method for Resistance to Steam Cleaning |
|
JAGUAR JNS 30.59.01 |
Elongation and Set |
|
JAGUAR JNS 30.60.01 |
Discoloration of Organic or Decorative Finishes and Trim Materials by Dry Heat |
|
JAGUAR JNS 30.60.02 |
Test Method for Paint Staining of Elastomeric Materials |
|
JAGUAR JNS 30.60.03 |
Paint Staining (Yellowing) |
|
JAGUAR JNS 30.60.04 |
Staining Tendency of Solvent Based Trim Adhesives |
|
JAGUAR JNS 30.60.05 |
Discoloration of Organic and Decorative Finishes and Trim Materials by Extraction Staining |
|
JAGUAR JNS 30.60.06 |
Assessment of Staining Caused by Trim Boards |
|
JAGUAR JNS 30.60.08 |
Determination of the Susceptibility to Amine Staining |
|
JAGUAR JNS 30.61.01 |
Measurement of Lining Thickness of Reinforced Hose or Pipe |
|
JAGUAR JNS 30.61.02 |
Determination of Thickness of Adhesive Backed Zinc Foil Gasket Material |
|
JAGUAR JNS 30.61.03 |
Measurement of Thickness and Thickness Change |
|
JAGUAR JNS 30.61.04 |
Coulometric and Metallographic Sectioning Methods of Determining Local Coating Thickness |
|
JAGUAR JNS 30.61.05 |
Simultaneous Testing of Thickness and Electrochemical Potential |
|
JAGUAR JNS 30.62.01 |
Breaking Load |
|
JAGUAR JNS 30.62.02 |
Breaking Load |
|
JAGUAR JNS 30.62.03 |
Tension Set of Elastomeric Materials |
|
JAGUAR JNS 30.62.04 |
Test for Tensile Strength as Received and After Environmental Exposure |
|
JAGUAR JNS 30.62.05 |
Test Method for Tensile Properties |
|
JAGUAR JNS 30.62.06 |
Tensile Properties of Elastomeric Materials |
|
JAGUAR JNS 30.62.07 |
Tensile Testing of Lap Shear Joints |
|
JAGUAR JNS 30.62.08 |
Preparation of Tensile Test Specimens for Lap Shear Pin Joints |
|
JAGUAR JNS 30.63.01 |
Tearing Force (Single Tear or ´Trouser´ Method) |
|
JAGUAR JNS 30.63.02 |
Tear Strength of Elastomeric Materials and Composites |
|
JAGUAR JNS 30.63.03 |
Tear Resistance of Homogeneous Tubing |
|
JAGUAR JNS 30.63.04 |
Measurement of Tear Strength of Bright Trim Protectives |
|
JAGUAR JNS 30.64.01 |
Preparation of Test Slabs from Room Temperature Curing Materials |
|
JAGUAR JNS 30.65.01 |
Determination of Solid Soil by the Mechanical Treatment and Ultrasonic Methods |
|
JAGUAR JNS 30.66.01 |
Actinic Degradation of Textiles |
|
JAGUAR JNS 30.66.02 |
Resistance to Ultra-Violet Light |
|
JAGUAR JNS 30.67.01 |
Determination of Loosening Characteristics of Threaded Fasteners Transverse Vibration Test |
|
JAGUAR JNS 30.68.01 |
Test Method for Vacuum Collapse |
|
JAGUAR JNS 30.68.02 |
Test for Vacuum Collapse |
|
JAGUAR JNS 30.69.01 |
Test Method for Total Weight |
|
JAGUAR JNS 30.69.02 |
Test Method for Weight of Rubber Coating |
|
JAGUAR JNS 30.69.03 |
Test Method for Weight of PVC Coating |
|
JAGUAR JNS 30.69.04 |
Total Weight |
|
JAGUAR JNS 30.69.05 |
Determination of Carpet Free Pile Weight |
|
JAGUAR JNS 30.70.01 |
Flexibility of Air Conveyance Hoses at Specified Minimum Bend Radius |
|
JAGUAR JNS 30.70.02 |
Materials Tests Flexibility (Mandrel Bend) |
|
JAGUAR JNS 30.70.03 |
Flex Resistance of Paint applied to Elastomeric Materials |
|
JAGUAR JNS 30.70.04 |
Conformability of Vibration Damping Pads |
|
JAGUAR JNS 30.70.05 |
Materials Tests Bending Properties of Metal Tubing |
|
JAGUAR JNS 30.70.06 |
Materials Tests Flaring Properties of Metal Tubing |
|
JAGUAR JNS 30.70.07 |
Test Method for Flexibility |
|
JAGUAR JNS 30.70.08 |
Bend Test for Rubber Hose |
|
JAGUAR JNS 30.70.09 |
Test Method for Flexural Properties |
|
JAGUAR JNS 30.70.10 |
Reverse Test Bend for Sheet Metal |
|
JAGUAR JNS 30.70.11 |
Determination of Flexural Stiffness of Laminates Bonded to Metal Substrates |
|
JAGUAR JNS 30.70.12 |
Measurement of Leather Softness |
|
JAGUAR JNS 30.71.01 |
Preparation of Painted Test Panels |
|
JAGUAR JNS 30.71.02 |
Determination of the Effect of Continuous Water Soaking on Paint Films |
|
JAGUAR JNS 30.71.03 |
Determination of the Cleanliness of Paint |
|
JAGUAR JNS 30.71.04 |
Procedure for Production Line Trials of Vehicle Body Paint Materials |
|
JAGUAR JNS 30.71.05 |
Resistance of Paint Films to Petrol and Diesel Fuels |
|
JAGUAR JNS 30.71.06 |
Resistance of Paint Films to Lubricating Oils |
|
JAGUAR JNS 30.71.07 |
Exterior Weathering in the United Kingdom |
|
JAGUAR JNS 30.71.09 |
Colour Match of Exterior Paints |
|
JAGUAR JNS 30.71.10 |
Determination of Dry Hiding Power and Colour Opacity of Paint Films |
|
JAGUAR JNS 30.71.11 |
Determination of the Resistance of Paint Films to Water and Soap Spotting |
|
JAGUAR JNS 30.71.12 |
Determination of the Resistance of Paint Films to Acid Spotting |
|
JAGUAR JNS 30.71.13 |
Determination of Resistance of Paint Films to Cold Checking |
|
JAGUAR JNS 30.71.15 |
Determination of Overspray Compatibility |
|
JAGUAR JNS 30.71.17 |
Resistance of Surfaces to Transit Protection Coatings |
|
JAGUAR JNS 30.71.19 |
Resistance of Paint Systems to Cycling Humidity |
|
JAGUAR JNS 30.71.20 |
Resistance of Paint Films to Salt Spray |
|
JAGUAR JNS 30.71.22 |
Determination of Volume Solids of Paint |
|
JAGUAR JNS 30.71.23 |
Clearcoat Rheology Test Method |
|
JAGUAR JNS 30.71.25 |
Finished Bodyshells Corrosion Tests |
|
JAGUAR JNS 30.71.26 |
Chip Test Rating System |
|
JAGUAR JNS 30.71.27 |
Paint Viscosity by Flow Cup |
|
JAGUAR JNS 30.71.28 |
Appearance Assessment Using "Wave Scan" |
|
JAGUAR JNS 30.72.01 |
Self Pierce Rivetability Test |