FORD WSS-M1A341-A4 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
 |
| Purchase Information |
| Use this form to request purchase information on FORD online subscriptions. |
|
|
Document FORD WSS-M1A341-A4 is offered by IHS as part of an online subscription. This subscription contains many documents on the same topic.
You may also purchase this document alone from the IHS Standards Store.
FORD WSS-M1A341-A4 Document Information:
Title
STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
Ford Motor Company
Publication Date:
May 3, 2006
Scope:
The materials defined by these specifications are steel sheet possessing good formability, weldability, and resistance to denting. Variants A1, A2, A8 & A10 increase in yield strength due to strain hardening. Variants A3 to A7 & A9 increase in yield strength due to a combination of strain hardening and paint baking (bake hardening). Variants A7 & A10 shall be supplied in the isotropic condition (see para 4.3) and be additionally controlled by the SMRL or EU2066 (see para 3.5). The choice of strengthening mechanism is at the discretion of the supplier and shall be described in the control plan. To assist users of these specifications (while not restricting the supplier's choice of strengthening mechanism) detailed below is a list of commonly used terms: (See also para 4.7).
. WSS-M1A341-A1: Dent Resistant 210
. WSS-M1A341-A2: Dent Resistant 250
. WSS-M1A341-A3: BH 180
. WSS-M1A341-A4: BH 210
. WSS-M1A341-A5: BH 250
. WSS-M1A341-A6: BH 280
. WSS-M1A341-A7: Isotropic BH 235
. WSS-M1A341-A8: Dent Resistant 180
. WSS-M1A341-A9: BH 300
. WSS-M1A341-A10: Isotropic 210
Specification WSS-M1P94-A shall be used where precoating by the steel supplier is required.
About IHS
IHS (NYSE: IHS) is a leading global provider of critical technical information, decision-support tools and related services in a number of industries including aerospace and defense, automotive, construction, electronics, and energy. IHS serves customers ranging from large governments and multinational corporations to smaller companies and technical professionals in more than 100 countries. IHS been in business for more than 45 years and employ more than 2,300 people around the world.
