Automotive Standards Updates

IHS is your single source for Automotive information solutions.  If you are involved with automotive projects, IHS has compliance and information tools and solutions to help you manage your workflow.  Contact us today to discuss how IHS can help you with your Automotive information needs. Call: 877-413-5187, email: global@ihs.com, or visit www.ihs.com for more information.

Did you know that you can get many of the standards listed below and others in an IHS subscription? As you may know, a subscription to the standards and specifications you need is a cost effective way to save time and money! So if you answer "yes" to any of the following, contact us for further information on an IHS Standards Subscription:

1. Are you struggling to keep your standards library current?
   
2. Does your company purchase more than $3,000 in standards per year?
   
3. Do you need automatic updates?
   
4. Do you have multiple users accessing the same standards?

Recently Updated or Revised

ASTM Intl.

ASTM A 370
Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Purchase this document:
Receive Subscription Information:

ASTM A 449
Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 KSI Minimum Tensile Strength, General Use
Purchase this document:
Receive Subscription Information:

ASTM A 751
Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
Purchase this document:
Receive Subscription Information:

ASTM B 117
Standard Practice for Operating Salt Spray (Fog) Apparatus
Purchase this document:
Receive Subscription Information:

DELPHI-I - Delphi Interior and Lighting Systems Groups

DELPHI DX550900
Autodeposition Primer (Dip Process) for Steel and Galvanized (Zinc) Substrates
Purchase this document:
Receive Subscription Information:

Ford Motor Company (Ford)

FORD E1-QSL
E1-QSL Qualified Source List North American Electrical Equipment
Purchase this document:
Receive Subscription Information:

FORD ESA-M11P19-A
Adhesion Requirements, Polyurethane Foam to Polypropylene-Pressure Sensitive Film
***To be Used with FORD WSS-M99P1111-A***
Purchase this document:
Receive Subscription Information:

FORD ESB-M11P8-A
Adhesion Requirements, Pressure Sensitive Adhesive - Sponge Rubber
***To be Used with FORD WSS-M99P1111-A***
Purchase this document:
Receive Subscription Information:

FORD FLTM BN 107-01
Crocking Test
Purchase this document:
Receive Subscription Information:

FORD WSD-M9P8-A
Rubber Parts, Interior and Exterior Performance
***To Be Used With FORD WSS-M9P1111-A***
Purchase this document:
Receive Subscription Information:

FORD WSS-M11P62-A
Adhesive, Interior Performance
***To Be Used With FORD WSS-M99P1111-A***
Purchase this document:
Receive Subscription Information:

General Motors North America (GM)

GM9985292
Adhesive, Tape, Strapping 9985294
Purchase this document:
Receive Subscription Information:

GM3604M
Adhesion Requirements of Exterior Trim Attached with Pressure Sensitive Adhesive Tape
Purchase this document:
Receive Subscription Information:

GMN11289
Crockmeter Lubricant Adhesion Test for Quick Plastic Forming
Purchase this document:
Receive Subscription Information:

GMP.TES.030
Thermoplastic Elastomer, Styrenic Block Copolymer, Shore D35, Interior, Paintable
Purchase this document:
Receive Subscription Information:

General Motors Europe (GME)

GME7834
Brazing
Purchase this document:
Receive Subscription Information:

GME QK 000145
Polyamide 66 with 33 % by Mass Glass Fibres, Heat Stabilized
Purchase this document:
Receive Subscription Information:

GME QK 000240
Blend from ABS and PA with Minerals
Purchase this document:
Receive Subscription Information:

GME QK 000658
Polyetherimide with Glass Fibres
Purchase this document:
Receive Subscription Information:

GME QK 001962
ABS with Glass Fibres
Purchase this document:
Receive Subscription Information:

General Motors Worldwide (GMW)

GMW3005
Topcoat, Generic Qualification
Purchase this document:
Receive Subscription Information:

GMW3059
Restricted and Reportable Substances for Parts
Purchase this document:
Receive Subscription Information:

GMW3390
Procedure for Determining the Flexibility of Automotive Upholstery Materials
Purchase this document:
Receive Subscription Information:

GMW14019
Mill Applied Corrosion Preventative Lubricant for Sheet Metal
Purchase this document:
Receive Subscription Information: 

GMW14652
Interior Trim Substrate Materials with Natural Content
Purchase this document:
Receive Subscription Information: 

GMW14969
Air Induction Subsystem Maximum Filtered Air Leakage Test
Purchase this document:
Receive Subscription Information: 

Holden (HN)

HN 1664
Basecoat/Clearcoat Enamel for Exterior Plastic Parts
Purchase this document:
Receive Subscription Information: 

HN 1775
Elastomer - Modified Polypropylene
Purchase this document:
Receive Subscription Information: 

International Truck and Engine Corporation (INTERN)

INTERN CEMS G-5 P3
Part III Paints - Chassis and Miscellaneous Paints, General Requirements
Purchase this document:
Receive Subscription Information: 

INTERN G-5 P3 GR 32
Part III Paints - Chassis and Miscellaneous Paints, Grade -32
Purchase this document:
Receive Subscription Information: 

INTERN CEMS G-5 P5 GR 50
Part V Paints - Primers Grade -50
Purchase this document:
Receive Subscription Information: 

INTERN CEMS G-20
Zinc Plating
Purchase this document:
Receive Subscription Information: 

INTERN CEMS GT-7E
Humidity Test for Paint
Purchase this document:
Receive Subscription Information: 

International Organization for Standardization (ISO)

ISO 10350-1
Plastics - Acquisition and Presentation of Comparable Single-Point Data - Part 1: Moulding Materials
Purchase this document:
Receive Subscription Information: 

ISUZU Motors Limited

ISUZU ISA-E-004
Surface Roughness
Purchase this document:
Receive Subscription Information: 

ISUZU ISC-A390
Stainless Steel Maraging Steel
Purchase this document:
Receive Subscription Information: 

SAE International (SAE)

SAE J211-1
(R) Instrumentation for Impact Test-Part 1-Electronic Instrumentation
Purchase this document:
Receive Subscription Information: 

SAE J430
Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets - Inch Series
Purchase this document:
Receive Subscription Information: 

SAE J575
Test Methods and Equipment for Lighting Devices and Components for Use On Vehicles Less than 2032 mm in Overall Width
Purchase this document:
Receive Subscription Information: 

SAE J1113-11
Immunity to Conducted Transients on Power Leads
Purchase this document:  
Receive Subscription Information: 

15 Inverness Way East • Englewood, CO 80112-5776 • USA
Tel: 303-397-7956 • 800-854-7179 • Fax: 303-397-2740
webstore: store.ihs.com